Best sellers

Teensy 4.1 is the fastest microcontroller with ARM Cortex-M7 600 MHz processor, 55 I/O pins, many communication interfaces, and additional functions such as cryptography and RTC, enabling USB programming. It is equipped with a microSD slot and an additional 8 MB PSRAM memory chip

The M5Stack U144 Key Unit is a versatile input device that combines a Blue mechanical switch with a programmable RGB LED. Its compact design and wide range of applications in various HMI scenarios make it an ideal choice for integration into systems and devices requiring intuitive user input and visual feedback. M5Stack U144

360-degree laser scanner (LIDAR) with a range of up to 10 meters and a measurement frequency of up to 12 Hz. LIDAR X4

32bit ARM Cortex-M0, 24K Flash, 8K RAM, LQFP48, RoHS

Arduino shield designed to work with the Raspberry Pi minicomputer. It is possible to combine the capabilities of the minicomputer and the Arduino board in one device. DFRobot DFR0327

YT-1400 is a flexible extension bar with a 1/4-inch size and a length of 150 mm, made of high-quality chrome-vanadium steel (CrV). It enables torque transfer to sockets in hard-to-reach areas, providing flexibility during operation.

Module with WiFi Espressif ESP32-S2. It integrates the TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5300

Ambient light sensor placed in a transparent hemisphere. It supports a detection range of 0 to 200 klx and communicates via the I2C interface. DFRobot SEN0390

SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 2 GB LPDDR4 RAM and 16 GB eMMC. Raspberry Pi CM4002016

Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468

2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 120 V AC or 24 V DC and currents up to 2 A. SB Components 21376

8-digit, 8-segment LED display module with 16-level brightness adjustment. Communication via the I2C interface. DFRobot DFR0646-R

Set of 10 cables, 30 cm long, for analog sensors compatible with the Gravity standard. DFRobot FIT0031

WiFi module with ESP8266 and 1.14" display, designed to work with Raspberry Pi Pico. It communicates via UART interface using AT commands. SB Components 21888

Module with an analog light sensor. It consists of a photoresistor and a LED. Equipped with a Gravity connector. DFRobot DFR0022

Module with a potentiometer with a rotation range of 300°. Equipped with a connector compatible with the Gravity standard. DFRobot DFR0054

Module with a button, LED diode and a yellow cap. DFRobot DFR0029-Y

The Yato brand double-ended open-end wrench, made of CrV alloy steel with a satin finish to minimize slipping, is 230 mm long, 42.1 mm and 46.8 mm wide, and 7.1 mm and 6.8 mm thick. YT-0374

Board with WiFi Espressif ESP32-S2 module and u.FL connector. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5348