RedBearLab BLE Nano Kit - nRF51822
ID: 560297
zł251.45
Tax included
zł204.43 tax excl.
The BLE Nano from RedBearLab is the smallest Bluetooth 4.1 Low Energy (BLE) development board on the market. With the included MK20 USB in this kit, you’ll be able to deploy firmware to BLE Nano even easier. WRL-14071/WRL-13730
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The BLE Nano from RedBearLab is the smallest Bluetooth 4.1 Low Energy (BLE) development board on the market. With the included MK20 USB in this kit, you’ll be able to deploy firmware to BLE Nano even easier. At each BLE Nano’s core is a Nordic nRF51822, an ARM Cortex-M0 System on Chip (SoC), plus BLE capable of running at 16MHz with ultra low power consumption. The RedBearLab BLE Nano also supports numerous different wireless devices running iOS 7/8, Android 4.3 or higher, and Windows Phone 8.1.
The DAPLink board functions as a USB dongle, accepting 5V from the USB port and regulating it to 3.3V via the onboard LDO, which can be used to power RedBearLab BLE Nano. When plugged into your computer, the USB board will appear as both a serial port and a removable mass storage disk.
Developing a Bluetooth Smart-enabled ‘appcessory’ (accessory device + companion application) is easier than ever. You can quickly produce prototypes and demos targeted for Internet of Things (IoT) and other interesting projects. The RedBearLab BLE Nano can operate under 1.8V to 3.3V, making it able to work in conjunction with a wide variety of electronic components.
It should be noted that the RedBearLab BLE Nano can accept 3.3V to 13V from the VIN pin; however, voltage will be regulated to 3.3V via the onboard LDO regulator, due in part to the nRF51822 IC. Since the RedBearLab BLE Nano can work as low as 1.8V, the MK20 USB board has been designed to run at 1.8V as well. All you need to do to get the USB board to run at 1.8V is short the switch S. Then the regulator will output 1.8V instead, allowing your Nano to work with applicable components.
Features
- Smallest BLE development board, only 18.5mm x 21.0mm
- Nordic nRF51822 ARM Cortex-M0 SoC supports both BLE Central and BLE Peripheral roles
- 2.4GHz transceiver
- Ultra low power consumption
- Support voltage from 1.8V to 3.3V
- Software development using mbed.org, GCC, Keil or Arduino
- Lots of libraries and examples available
- Easy firmware deployment with the DAPLink USB board
- Works with our free Android App and iOS App
Package contain
- 1x RedBearLab BLE Nano
- 1x DAPLink USB Board
560297
Other products in the same category (16)
BLE module based on Cortex-M4F core with integrated 2.4GHz antenna. It has been equipped with numerous peripheral systems, including UART, I2C, SPI, I2S interfaces and ADC inputs. Has support in the Arduino IDE. SparkFun WRL-15484
zł72.61
24h
Available quantity: 3
Available
The module is compatible with the Grove Base Shield and designed to implement a wireless serial connection. It uses Bluetooth 4.0 (BLE) HM-11 and UART communication. Seeed Studio 113020008
zł137.11
24h
Available quantity: 3
Available
BLE Beacon transmitting Bluetooth signals at regular intervals. These signals can be detected by Bluetooth-enabled devices such as the SenseCAP T1000 tracker, allowing them to determine their distance from the beacon, creating a location-based indoor positioning solution. Seeed Studio 113991194
zł66.04
24h
Available quantity: 1
Available
An efficient Bluetooth 4.0 module that ensures excellent operating parameters and significantly increases the efficiency of wireless communication. It is based on the popular Nordic BLE 4.0 nRF51822 microcontroller, which guarantees both performance and low power consumption. It has a built-in Bluetooth stack and is controlled via the UART interface using AT commands. WT51822-S4AT
zł29.90
24h
Available quantity: 4
Available
The ESP32 WiFi and Bluetooth module has a dual-core 32-bit MCU that integrates WiFi HT40 and Bluetooth / BLE 4.2 technology. Designed for mobile devices and Internet of Things (IoT) applications. DFRobot TEL0111
zł38.97
24h
Available quantity: 2
Available
HC-08 is a module operating in the Bluetooth Low Energy 4.0 standard. The system has a built-in antenna and small dimensions, and thanks to edge joints it can be surface soldered. The module is configured via AT commands
zł59.27
24h
Available quantity: 35
Available
Intel\'s AX200 wireless communication module. It supports the 802.11AX Wi-Fi Generation 6 standard and Bluetooth 5.2, and features an M.2 A/E Key with NGFF interface. Waveshare Wireless-AX200
zł116.25
24h
Available quantity: 2
Available
Hardware extension adds Bluetooth Class 2 radio communication capability to Open4, EvoPrimer and STM32 Primer2 platforms
zł578.62
6 weeks
No product available!
The module enables wireless communication using Bluetooth Low Energy technology version 4.1. It has a built-in AMS002 chip with UART interface. MOD 61
zł97.69
24h
Available quantity: 1
Available
Comprehensive development platform for Espressif ESP32 a WiFi-compatible microcontroller and nearly 30 I/O pins. DEV-13907
zł121.06
24h
Available quantity: 3
Available
Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. SB Components 21895
zł265.77
24h
Available quantity: 1
Available
Bluetooth module with integrated HC-08 system. Thanks to the angular pin connector with the bus signals, it is possible to easily connect the module to the contact plate or wires
zł56.84
24h
Available quantity: 30
Available
Integrated circuit, combining Wi-Fi functionality and Bluetooth 4.2 BLE. Integrated 32-bit dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be supplied with 2.2V-3.6V. The system has a QFN48 (5x5mm) housing. ESP32-D0WD
zł16.53
24h
Available quantity: 98
Available
An integrated module combining WiFi, Bluetooth 4.0 and FM radio. It has derived SDIO, UART and PCM interfaces. Ampak AP6335
zł71.84
24h
Available quantity: 4
Available
The module is compatible with the Grove Base Shield and designed to implement a wireless serial connection. It uses BluetoothV2.0+EDR and UART communication. Seeed Studio 113020008
zł110.24
24h
Available quantity: 3
Available
KAmodBT-HC05 is a Bluetooth module configured via AT commands. It has integrated LEDs indicating operating mode and connection status with the paired device, as well as a logic level translator on UART lines. KAmodBT-HC05
zł49.90
24h
Available quantity: 103
Available
The BLE Nano from RedBearLab is the smallest Bluetooth 4.1 Low Energy (BLE) development board on the market. With the included MK20 USB in this kit, you’ll be able to deploy firmware to BLE Nano even easier. WRL-14071/WRL-13730