![Arducam Multi Camera Adapter - stereo camera adapter for Raspberry Pi Arducam Multi Camera Adapter - stereo camera adapter for Raspberry Pi](https://kamami.pl/37973-large_default/arducam-multi-camera-adapter-stereo-camera-adapter-for-raspberry-pi-b016601.jpg)
![Arducam Multi Camera Adapter - stereo camera adapter for Raspberry Pi Arducam Multi Camera Adapter - stereo camera adapter for Raspberry Pi](https://kamami.pl/37973-large_default/arducam-multi-camera-adapter-stereo-camera-adapter-for-raspberry-pi-b016601.jpg)
zł133.37 tax excl.
The expansion module to support two cameras is designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one minicomputer connector. ArduCAM B016601
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The expansion module to support two cameras is designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one minicomputer connector. Supports support for 5 MP and 8 MP cameras. Only one of the two cameras can be activated at a time (they operate alternately). It cannot support two cameras at the same time, but the manufacturer provides software that allows you to operate two cameras and make it appear as if they are running at the same time. The module significantly extends the capabilities of the Raspberry Pi in the area of camera support. It will be used for projects using stereo vision, 360 cameras or advanced surveillance systems.
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
Flex Cable for Raspberry Pi Camera - 100mm / 4"
Flex Cable for Raspberry Pi Camera - 200mm / 8"
Flex Cable for Raspberry Pi Camera - 300mm / 12"
Flexible cable (tape) 50 cm long, used to connect the camera module with Raspberry Pi computers. The tape has 15 wires and a pitch of 1mm
No product available!
OV5647 Camera Board /w M12x0.5 mount Lens fully compatible with Raspberry Pi. ArduCAM B0031
OV5647 Camera Board /w CS mount Lens fully compatible with Raspberry Pi. ArduCAM B0032
OV5647 Camera Board with LS-40180 Fisheye Lens M12x0.5 Mount for Raspberry Pi 3. ArduCam B0055
No product available!
100cm flexible cable (tape) for connecting the camera module to Raspberry Pi computers. The tape has 15 wires and 1mm pitch
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
The control platform equipped with servos allows you to control the position of the camera in two dimensions. It has a built-in driver and light sensor. Waveshare Pan-Tilt HAT
CSI-USB adapter designed for the Raspberry Pi HQ camera. It allows you to connect the camera via a USB interface to UVC compatible devices running under Linux, Windows, MacOS or Android. ArduCAM B0278
Flex Cable for Raspberry Pi Camera - 200mm / 8"
300mm ArduCam extension cable. Compatible e.g. with IMX219 image sensor. ArduCam B0186
ArduCam CSI to HDMI modules are designed to work with cameras: Raspberry Pi V1 and Raspberry Camera V2. ArduCAM CSI to HDMI allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters). Arducam B0091
Multifunctional lens calibration kit for M12, CS-Mount, C-Mount and DSLR lenses. It allows focus calibration, FoV measurement without the need for additional calculations and focusing. ArduCAM B0226
The adapter allows to extend the CSI / DSI interface using two FFC tapes (by connecting them in one tape). It allows you to connect the camera to a Raspberry Pi computer or a DSI display, for distances using two FFC tapes. Adafruit 3671
Base plate designed for Luxonis BW1099 DepthAI SoM modules. It has three interfaces for connecting cameras with a 26-pin connector. ArduCAM B0327
No product available!
Camera module with a two-degree-of-freedom (2 DoF) platform. It uses the OV5647 sensor with a resolution of 5 MP and provides a 360° camera rotation angle thanks to the built-in servo. It is dedicated to the Raspberry Pi 4B and Raspberry Pi 5 minicomputers. 2-Axis Pan-Tilt Camera Module (EU)
Two modules with infrared LED lighting for the ArduCAM Raspberry Pi NOIR 5MP OV5647 camera. Can be widely used in wildlife night vision photography, agriculture, etc. ArduCAM B0035LED
Arducam USB shield is a module that allows you to connect some ArduCam cameras to a PC or minicomputers, eg Raspberry Pi, BeagleBone etc. The module supports most cameras with a serial interface that have a resolution of 0.3 ... 14 MPix. Attached to the module are appropriate libraries that facilitate image processing, eg using OpenCV software. ArduCam B0095
The 15 cm long tape allows you to connect the camera to the Raspberry Pi Zero series. Waveshare RPi Zero V1.3 Camera Cable 15cm
Flexible cable (tape) 50 cm long, used to connect the camera module with Raspberry Pi computers. The tape has 15 wires and a pitch of 1mm
No product available!
30 cm long tape, a knockout attempt for Raspberry Pi Zero series. Waveshare RPi Zero 2 W Camera Cable 30cm
The Arducam Mini Multi-Camera Adapter Board is an expander that can connect up to 4 ArduCam cameras. ArduCam B0074
No product available!
Adapter dedicated to Omnivision cameras. Allows you to connect an image sensor to the evaluation kit. ArduCAM B0012
The expansion module to support two cameras is designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one minicomputer connector. ArduCAM B016601