IMX477-160 12.3MP Camera - camera with Sony IMX477 12.3MP sensor for Raspberry Pi CM and Jetson Nano
ID: 584014
zł398.26
Tax included
zł323.79 tax excl.
Camera for Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was equipped with a Sony IMX477 sensor with a resolution of 12.3 MPx and a built-in IR filter. Waveshare IMX477-160 12.3MP Camera
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Camera designed for SoM Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was equipped with a Sony IMX477 sensor with a resolution of 12.3 MPx and a built-in IR filter. The camera can mount lenses with CS mount (6mm) and C mount (16mm) using an adapter. The installation and configuration of the camera is very intuitive. It is designed for industrial and consumer applications, such as: monitoring or automatic systems that require the highest video quality. Full documentation is available on the Product Wiki page.
Attention!
The camera can only support Raspberry Pi Compute Module series, cannot be used with Raspberry Pi boards such as Raspberry Pi Model 4B.Features
- Compatible with SOM Raspberry Pi Compute Module (Compute Module 3+ IO Board and Compute Module 4+ IO Board) and NVIDIA Jetson Nano (requires additional drivers)
- Sony IMX477 sensor
- Resolution 12.3 MPx, 4056 (H) × 3040 (V)
- Sensor diagonal 7.9 mm
- Pixel size 1.55 μm × 1.55 μm
- Aperture (F): 2.2
- Focal length (BFL): 5.52
- Viewing angle (FoV): 160 ° (D) 118 ° (H) 87 ° (V)
- Output: RAW12/10/8, COMP8
- Adjustable focus
- Lens standards: CS, C (via C-CS adapter)
- IR filter
- Power supply: 3.3 V
584014
Data sheet
- Resolution
- 12,3 MPx
- Interface
- MIPI CSI-2
- Sensor
- Sony IMX477
- IR filter
- Yes
- Lens assembly
- C/CS mount
You might also like
Compute Module IO Board Plus is a prototype board that allows you to connect Raspberry Pi CM3 module and CM3L module. It is equipped with numerous GPIO pins, HDMI port, USB ports, camera and display ports. Compute Module IO Board Plus
zł307.46
24h
Available quantity: 2
Available
Raspberry Pi Compute Module 3+ (CM3 +) is a SoM module containing key elements of the Raspberry Pi 3 A + / B + computer, including Broadcom BCM2837B0 processor, 1 GB RAM, 8 GB eMMC memory. The module is equipped with a 200-pin SODIMM connector.
zł159.00
Delivery date unknown
No product available!
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU chip and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has a DDR4 4GB RAM memory. NVIDIA Jetson Nano Development Kit rev. B01 945-13450-0000-100
zł1,098.18
24h
Available quantity: 11
Available
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
zł194.91
Delivery date unknown
No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 8 GB eMMC. Raspberry Pi CM4001008
zł202.85
Delivery date unknown
No product available!
Other products in the same category (16)
Camera with a USB interface with a resolution of 16 MPx in a metal housing. Equipped with a Sony CMOS IMX298 sensor and a wide-angle lens with a viewing angle of 105°. ArduCAM B026801
zł589.01
24h
Available quantity: 2
Available
Camera module with Sony IMX219 sensor designed for use with the NVIDIA Jetson Nano. The camera is equipped with an 8 MPx sensor and has a 160° viewing angle. Waveshare IMX219-160IR Camera
zł126.64
6 weeks
No product available!
Camera with OV4689 CMOS sensor with a resolution of 2688x1520 px. It communicates via a parallel interface. ArduCAM U6035
zł89.00
24h
Available quantity: 2
Available
8 Mpx camera module with IMX219 sensor. The camera is intended for use as a replacement on the RPI Camera Board V2. ArduCAM B0180
zł129.69
24h
Available quantity: 3
Available
Monochrome camera module 10 Mpx with sensor MT9J001 / MT9J003 designed for use with the ArduCam USB Shield module. Lens LS-18023M12. Support for video recording 1080p @ 30fps and VGA @ 60fps. Arducam 10MP: MT9J001 / MT9J003
zł279.58
24h
Available quantity: 3
Available
The camera module is based on a CMOS sensor - AR0134. It has a resolution of 1280 x 960 px (1.2 MPx). The module supports recording of video sequences: 1280 x 960 @ 54fps and 1280 x 720 @ 60Ffps. Intended for use only with the ArduCam USB Shield module. Arducam B0100
zł467.78
4 weeks
No product available!
Camera module based on the CMOS MT9V022 matrix with a resolution of 752x480 px (0.36 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0109
zł306.73
24h
Available quantity: 1
Available
Raspberry Pi Camera Module, Embedded IR-CUT, Supports Night Vision
zł115.29
24h
Available quantity: 2
Available
1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and M12 lens mount, it is characterized by good sensitivity. ArduCAM B0224
zł259.17
24h
Available quantity: 1
Available
8 Mpx camera module with IMX219 sensor with low distortion lens. The camera is intended for use as a replacement on the RPI Camera Board V2. ArduCAM B0184
zł84.32
24h
Available quantity: 3
Available
1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and an IR filter, it is characterized by good sensitivity. Waveshare OV9281-120 Camera
zł152.06
24h
Available quantity: 3
Available
A set with a monochrome camera with a resolution of 0.3 MPx with an OV7251 sensor, a USB adapter and a MIPI adapter. Without IR filter. ArduCAM EK028
zł898.99
24h
Available quantity: 1
Available
The camera module with the Sony IMX219 sensor works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0153
zł443.82
4 weeks
No product available!
Camera module with OV5647 sensor working with Raspberry Pi. Has no built-in IR filter and comes with a 130° Fisheye lens
zł48.18
Delivery date unknown
No product available!
Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 60° and an autofocus function. ArduCAM B0292
zł192.61
4 weeks
No product available!
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount. Acrylic housing included. ArduCAM B0221
zł565.01
24h
Available quantity: 1
Available
Camera for Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was equipped with a Sony IMX477 sensor with a resolution of 12.3 MPx and a built-in IR filter. Waveshare IMX477-160 12.3MP Camera