ArduCAM IMX219 Camera - module with IMX219 camera and "Fisheye" lens for Raspberry Pi CM
ID: 586861
5906623403684
zł177.59
Tax included
zł144.38 tax excl.
Module with 8 Mpx camera with IMX219 sensor and wide-angle "fisheye" lens. Designed for Nvidia Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0287
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with IMX219 sensor designed for use with Raspberry Pi Compute Module or Nvidia Jetson Nano. The sensor used has an 8 Mpx matrix and allows you to record video at resolutions 30fps @ 8MP, 60fps @ 1080p, 180fps @ 720p. The camera is equipped with a wide-angle "fisheye" lens with a viewing angle of 220 ° with an M12 mount. It uses the MIPI CSI-2 interface specially designed to work with cameras. Can be used in drone, robot and 3D scanning applications. The set with the camera includes a 15-pin tape for connecting the camera to the Raspberry Pi model B and A, and a 22-pin tape for the Raspberry Pi Zero 2W and the Compute module.
Features
- Works with Raspberry Pi Compute Module or Nvidia Jetson Nano - not compatible with Raspberry Pi 3B, 3B+, 4B
- Matrix: IMX219
- Resolution: 8 Mpx
- Data format: 30fps @ 8MP, 60fps @ 1080p, 180fps @ 720p
- Optical size: 1/4 inch
- M32076M20 lens
- Viewing angle: 220 (H)
- EFL: 0.76mm
- F.NO: 2.1
- Output interface: MIPI CSI-2 2-lane/4-lane
- Output formats: 8/10-bit RAW
- Integrated IR filter
Kit contains
- Arducam IMX219 Camera Module with Fisheye lens
- 15-pin FPC cable 15 cm
- Adapter 15-pin to 22-pin 30 cm
586861
Data sheet
- Resolution
- 8MPx
- Interface
- MIPI CSI-2
- Sensor
- Sony IMX219
- IR filter
- Yes
- Lens assembly
- M12
You might also like
Compute Module IO Board Plus is a prototype board that allows you to connect Raspberry Pi CM3 module and CM3L module. It is equipped with numerous GPIO pins, HDMI port, USB ports, camera and display ports. Compute Module IO Board Plus
zł307.46
24h
Available quantity: 1
Available
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
zł175.00
24h
Available quantity: 18
Available
Base board prepared for Raspberry Pi CM4 modules. It integrates the PoE circuit, it is equipped with connectors for all available interfaces, additionally on the board there is a RTC system and a fan connector. Waveshare Compute Module 4 PoE Board (B)
zł198.88
24h
Available quantity: 1
Available
8 Mpx camera module with IMX219 sensor and wide-angle "fisheye" lens. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0286
zł89.90
Delivery date unknown
No product available!
Other products in the same category (16)
The module with the IMX219 camera with a resolution of 8 MP. It has a viewing angle of 62° and a built-in IR filter. ArduCAM B0390
zł43.79
4 weeks
No product available!
1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and M12 lens mount, it is characterized by good sensitivity. ArduCAM B0224
zł259.17
24h
Available quantity: 1
Available
Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and RPi Compute Module. The camera is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 162°. Waveshare IMX219-160 IR-CUT Camera
zł125.76
24h
Available quantity: 2
Available
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 127° angle of view. Waveshare IMX462-127 2MP Starlight Camera
zł346.26
24h
Available quantity: 2
Available
Camera module with Sony IMX291 image sensor with 2 MP resolution. Compatible with Raspberry Pi. Supports H.264, MJPG and YUY2 data format. Has a built-in IR filter. ArduCam B0200
zł251.62
24h
Available quantity: 2
Available
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero V1.3 and Zero W. Equipped with a lens with a viewing angle of 70°. Waveshare RPi Zero V1.3 Camera
zł55.58
24h
Available quantity: 10
Available
A set with a 64 MP camera and an Ethernet adapter designed for minicomputers Raspberry Pi and Jetson Nano. It allows you to extend the connection range between the minicomputer and the camera up to 15 m. ArduCAM B0399U6248
zł501.91
24h
Available quantity: 1
Available
A set with four cameras equipped with IMX219 sensors with a resolution of 8 MPx and an adapter for Raspberry Pi minicomputers. ArduCAM B0178
zł1,317.90
24h
Available quantity: 1
Available
Module with OV5647 sensor working with Raspberry Pi. It uses a built-in motorized IR-CUT filter that is turned on and off automatically depending on the lighting conditions. ArduCAM B003504
zł159.33
24h
Available quantity: 1
Available
Camera module with OV5647 5MP sensor dedicated to Raspberry Pi. Designed for 3D printing monitoring systems. ArduCAM B0033R
zł35.90
24h
Available quantity: 17
Available
Set with a camera with a resolution of 108 MP, USB 3.0 adapter and a cable. ArduCAM EK030
zł2,799.00
Delivery date unknown
No product available!
A set with two IMX477 cameras with a resolution of 12 MP and an expansion module for Raspberry Pi, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0265R
zł1,520.59
4 weeks
No product available!
The camera set with the IMX219 8 MPx sensor allows you to rotate the camera, control the angle of inclination and zoom. Works with Raspberry Pi. Swivel base included. ArduCAM B0167B8
zł1,109.99
24h
Available quantity: 2
Available
Camera module for Raspberry Pi minicomputers with IR-CUT filter. Equipped with an OV5647 (5 MPx) sensor, it supports image acquisition both during the day and at night. Waveshare 15203
zł114.67
24h
Available quantity: 2
Available
5MP camera for Raspberry Pi minicomputers (1080p resolution). Equipped with OmniVision OV5647 sensor.
zł20.69
24h
Available quantity: 13
Available
A miniature camera module with a 5MP OV5647 sensor dedicated to the Raspberry Pi. Designed for projects where image size and quality are important. Waveshare RPi FPC Camera (B)
zł82.39
24h
Available quantity: 2
Available
Module with 8 Mpx camera with IMX219 sensor and wide-angle "fisheye" lens. Designed for Nvidia Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0287