- Out-of-Stock
ArduCAM IMX219 Low Distortion IR Sensitive (NoIR) M12 Mount Camera - module with 8MP IMX219 camera for Raspberry Pi CM
ID: 586883
5906623403820
Module with 8 Mpx camera with IMX219 sensor and lens with 75° viewing angle. Designed for Nvidia Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0187
Description
Module with IMX219 sensor designed for use with Raspberry Pi Compute Module or Nvidia Jetson Nano. The sensor used has an 8 Mpx matrix and allows you to record video at resolutions 30fps @ 8MP, 60fps @ 1080p, 180fps @ 720p. The camera is equipped with a lens with a viewing angle of 75° with an M12 mount. It uses the MIPI CSI-2 interface specially designed to work with cameras. Can be used in drone, robot and 3D scanning applications.
Features
- Works with Raspberry Pi Compute Module or Nvidia Jetson Nano - not compatible with Raspberry Pi 3B, 3B+, 4B
- Matrix: IMX219
- Resolution: 8 Mpx
- Data format: 30fps @ 8MP, 60fps @ 1080p, 180fps @ 720p
- Optical size: 1/4 inch
- Viewing angle: 75 (H)
- EFL: 2.8 mm
- F.NO: 2.8
- Output interface: MIPI CSI-2 2-lane/4-lane
- Output formats: 8/10-bit RAW
- No IR filter
Kit contains
- Arducam IMX219 Camera Module with lens
- 15-pin FPC cable 15 cm
586883
Data sheet
- Resolution
- 8MPx
- Interface
- MIPI CSI-2
- Sensor
- Sony IMX219
- IR filter
- No
- Lens assembly
- M12
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Compute Module IO Board Plus is a prototype board that allows you to connect Raspberry Pi CM3 module and CM3L module. It is equipped with numerous GPIO pins, HDMI port, USB ports, camera and display ports. Compute Module IO Board Plus
zł287.28
24h
Available quantity: 1
Available
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
zł175.00
Delivery date unknown
No product available!
Base board prepared for Raspberry Pi CM4 modules. It integrates the PoE circuit, it is equipped with connectors for all available interfaces, additionally on the board there is a RTC system and a fan connector. Waveshare Compute Module 4 PoE Board (B)
zł184.41
24h
Available quantity: 2
Available
8 Mpx camera module with IMX219 sensor and wide-angle "fisheye" lens. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0286
zł81.12
24h
Available quantity: 1
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,055.36
24h
Available quantity: 1
Available
Other products in the same category (16)
PLATEBOARD - PROGRAMMED CONTROLLER FOR TOYS AND MODELS - CONTROLLER PRINTED BOARD
Retired
No product available!
Integrated, built-in SOM (System on Module) ARM system, equipped with TI AM3359 processor with ARM Cortex-A8 core, 512 MB DDR3 SDRAM, 512 MB Nand Flash and Gigabit Ethernet PHY and interfaces supporting PRU / ICSS protocols in real time. MYiR MYC-AM3359
Retired
No product available!
Graphic LCD 240x64, 18x6.5cm, LED backlight (WHITE) NEGATIVE FSTN, T6963C or SAP1024B controller, character generator
Retired
No product available!
No product available!
No product available!
PCB and pre-programmed system for LED controller controlled by any remote control. AVT3133 A +
Retired
No product available!
Andrew Vladimirov, Konstantin V. Gavrilenko, Andrei A. Mikhailovsky
Delivery date unknown
No product available!
No product available!
Permanent cylindrical neodymium magnet with a diameter of 12 mm and a height of 3 mm.
Retired
No product available!
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Frozen
Retired
No product available!
OLED Longlife alphanumeric display 2x20 characters, text color yellow on a black background. Winstar WEH002002ALPP5N00008
Retired
No product available!
No product available!
Bent Sorensen (Sørensen), Paul Breeze, Galen Suppes, N. El Bassam, Dr. Semida Silveira, Shang-Tian Yang, Aldo da Rosa, Harsh Gupta, Sukanta Roy, Mukesh Doble, Michel Broussely, P. Maegaard, Frano Barbir, Gianfranco Pistoia, Soteris Kalogirou, Truman Storvick
Delivery date unknown
No product available!
Expansion board with LCD TFT 2.2" display for STM32 Nucleo kits. It can work with the latest version of the TouchGFX 4.15.0 environment. STMicroelectronics X-NUCLEO-GFX01M1
Retired
No product available!
No product available!
Module with 8 Mpx camera with IMX219 sensor and lens with 75° viewing angle. Designed for Nvidia Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0187