.png)
Current Sensor Pololu ACS37030 ±65A 3.3V - Pololu 5699
ID: 1207057
zł75.57
Tax included
zł61.44 tax excl.
Current measurement module using the galvanically isolated Allegro ACS37030LMYATR-065B3 sensor. A combination of Hall-effect sensing and an inductive coil provides DC to 5 MHz measurement bandwidth, a ±65 A range, and a typical response time of 40 ns. The larger carrier board facilitates high-current connections. Pololu 5699
Description
Current sensor module Pololu 5699 uses the Allegro ACS37030LMYATR-065B3 electrically isolated current sensor. The device provides bidirectional current measurement from -65 A to +65 A and uses two signal paths: a Hall-effect sensor for DC and low-frequency current information and an inductive coil for high-frequency signals. This combination provides measurement bandwidth from DC to 5 MHz and a typical response time of approximately 40 ns.
Sensor operates from a 3.0–3.6 V supply, with 3.3 V nominal operation, and provides a sensitivity of 20.3 mV/A. The analog VOUT output is centered at 1.65 V at zero current and changes proportionally to the measured current. The VREF output provides a zero-current reference for noise-sensitive applications, while the non-ratiometric output characteristic reduces the influence of supply voltage variations on sensitivity and zero point.
Large Carrier version uses a 6-layer PCB with 2 oz copper, providing more space for thick wires, ring terminals, and other high-current connections. The sensor IC current path resistance is typically 0.9 mΩ, while the working isolation rating is 1000 VRMS. The minimum PCB creepage distance is approximately 11.9 mm, and the board measures approximately 35.6 × 30.5 mm.
Features
- Manufacturer: Pololu
- Pololu product number: 5699
- Sensor: Allegro ACS37030LMYATR-065B3
- Carrier version: Large Carrier
- Sensing technology: Hall effect + inductive coil
- Current measurement range: -65 A to +65 A, bidirectional
- Supply voltage range: 3.0–3.6 V, 3.3 V nominal
- Sensitivity: 20.3 mV/A
- Output voltage at 0 A: 1.65 V
- Outputs: analog VOUT and VREF reference output
- Measurement bandwidth: DC to 5 MHz
- Typical response time: 40 ns
- Current path resistance: typically 0.9 mΩ
- Supply current: typically 20 mA
- Isolation: galvanic, 1000 VRMS working isolation rating
- Minimum PCB creepage distance: 11.9 mm
- PCB: 6-layer, 2 oz copper
- Board dimensions: approximately 35.6 × 30.5 mm
- Weight: approximately 4 g
1207057
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±65 A
- Sposób podłączenia
- Szeregowy
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
ACS724LLCTR-20AU current sensor module with a current measurement range from 0 to 20 A. It communicates via an analog interface. Pololu 4044
zł39.90
24h
Available quantity: 6
Available
ACS724LLCTR-10AB current sensor module with a DC and AC measurement range from -10 to +10 A. It communicates via an analog interface. Pololu 4043
zł40.66
24h
Available quantity: 7
Available
ACS724LLCTR-2P5AB current sensor module with a DC and AC measurement range from -2.5 to +2.5 A. It communicates via an analog interface. Pololu 4040
zł39.10
24h
Available quantity: 2
Available
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
zł88.95
24h
Available quantity: 15
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5240
zł20.25
24h
Available quantity: 5
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5241
zł19.58
4 weeks
No product available!
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5243
zł21.23
24h
Available quantity: 2
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5244
zł23.16
24h
Available quantity: 5
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5245
zł21.89
24h
Available quantity: 17
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5246
zł21.23
24h
Available quantity: 3
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252
zł56.36
24h
Available quantity: 6
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5253
zł56.41
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5254
zł56.41
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5255
zł56.42
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5256
zł56.41
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5257
zł56.42
24h
Available quantity: 2
Available
Current measurement module using the galvanically isolated Allegro ACS37030LMYATR-065B3 sensor. A combination of Hall-effect sensing and an inductive coil provides DC to 5 MHz measurement bandwidth, a ±65 A range, and a typical response time of 40 ns. The larger carrier board facilitates high-current connections. Pololu 5699