ACS724 Current Sensor Carrier ±50A
ID: 575895
zł58.22
Tax included
zł47.33 tax excl.
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
ACS724 Current Sensor Carrier is a module with bidirectional Hall current sensor based on the ACS724 system. Allows you to measure current in the range of -50 A to +50 A. It works with a voltage of 4.5 V to 5.5 V and is designed for use in 5 V systems. Offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. The output is a proportional analog voltage (40 mV/A) centered at 2.5 V with an error of ± 0.8%.
Specification
- Differential Hall Detection
- 1.2 mΩ internal conductive path resistance
- Electrical isolation up to 2.4 kV RMS
- High 120 kHz throughput for faster response times
- The pin filter allows the user to filter the output to improve the resolution
- The integrated digital temperature compensation circuit allows for accuracy close to the closed loop relative to the temperature in the open loop sensor
- Operating voltage 4.5 to 5.5 V
- Current measuring range from -50 A to +50 A
- Output resolution 0.040 V/A
- Operating temperature range from -40 °C to 150 °C
- Dimensions: 17.8 x 20.3 mm
- Weight: 1.1 g
Included
- ACS724 Current Sensor Carrier module
- Straight 3-pin male connector
575895
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±50 A
- Sposób podłączenia
- Szeregowy
You might also like
The current measurement of 0 - 30A is carried out by the ACS712-30 system based on the Hall effect. The sensitivity of the system is 66mV / A (analog signal).
zł8.00
Delivery date unknown
No product available!
Module with INA219 system with bi-directional current meter
zł11.62
Delivery date unknown
No product available!
Module with bi-directional current sensor based on the INA226 system. It allows you to measure current and power, works with a voltage of 0-36 V. It has an I2C interface.
zł29.90
24h
Available quantity: 28
Available
Other products in the same category (16)
The module with the ACS725 current sensor with a direct current measuring range up to 10 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020616
zł52.62
24h
Available quantity: 5
Available
ACS724LLCTR-2P5AB current sensor module with a DC and AC measurement range from -2.5 to +2.5 A. It communicates via an analog interface. Pololu 4040
zł66.90
24h
Available quantity: 1
Available
The current measurement of 0 - 30A is carried out by the ACS712-30 system based on the Hall effect. The sensitivity of the system is 66mV / A (analog signal).
zł8.00
6 weeks
No product available!
The module with the ACS70331 current sensor with a direct and alternating current measuring range ±5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020615
zł64.99
24h
Available quantity: 2
Available
Module with an analog current sensor. It enables the measurement of AC and DC current up to 50 A. DFRobot SEN0098
zł134.91
4 weeks
No product available!
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
zł45.46
24h
Available quantity: 1
Available
Available
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 90 A. SparkFun SEN-16408
zł136.90
6 weeks
No product available!
ACS724LLCTR-30AB current sensor module with a DC and AC measurement range from -30 to +30 A. It communicates via an analog interface. Pololu 4047
zł52.36
24h
Available quantity: 5
Available
Module with ACHS-7123 current sensor with a measuring range of direct and alternating current from -30 to 30 A. It communicates via an analog interface. Pololu 4032
zł34.06
24h
Available quantity: 4
Available
Available
INA169 current sensor module. The system can be supplied with the voltage from 2.7 V to 60 V and has an analog output. SparkFun SEN-12040
zł58.68
24h
Available quantity: 1
Available
Power monitor module that detects voltages up to 60 VDC and current up to 30 A. It uses the Allegro MicroSystems ACS37800 IC, which simplifies adding monitoring to power systems. SparkFun SPX-17873
zł179.00
6 weeks
No product available!
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 45 A. SparkFun SEN-16407
zł136.90
6 weeks
No product available!
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 10 A. DFRobot SEN0288
zł108.03
24h
Available quantity: 12
Available
ACS723 current sensor module with a DC and AC measuring range of ± 5 A. It can read very low currents of 10 mA. It communicates via the analog interface. SparkFun SEN-14544
zł117.16
4 weeks
No product available!
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049