Gravity: Analog 50A Current Sensor - module with analog 50A AC/DC current sensor
ID: 581607
zł134.91
Tax included
zł109.68 tax excl.
Module with an analog current sensor. It enables the measurement of AC and DC current up to 50 A. DFRobot SEN0098
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with an analog current sensor ACS758. It enables the measurement of alternating and direct current up to 50 A. The module has an analog output compatible with the Gravity standard. The measurement is based on the use of the Hall effect. The sensor has a stable measurement and almost zero magnetic hysteresis. The ACS758 has a low internal resistance of 100 μΩ and therefore generates low power losses during operation. The module will be used in projects of controlling automation devices. On the Wiki page there is a user manual with a sample Arduino program.
Features
- Current measuring range: -50 to 50 A
- Maximum measurement voltage: 3000 V AC, 500 V DC
- Bandwidth: 120kHz
- 3 μs rise time in response to step input current
- Stable output voltage
- Nearly zero magnetic hysteresis
- Internal resistance 100 μΩ
- Sensitivity: 40 mV / A
- Interface: Gravity PH2.0-3P
- Power supply: from 3.3 V to 5 V
- Dimensions: 34 x 34 mm
Kit contains
- Module with AC/DC current sensor
- Gravity-3P cable
581607
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±50 A
- Sposób podłączenia
- Szeregowy
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł113.90
24h
Available quantity: 70
Available
Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł46.53
24h
Available quantity: 2
Available
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
zł44.51
Delivery date unknown
No product available!
Other products in the same category (16)
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 20 A. DFRobot SEN0211
zł104.32
24h
Available quantity: 1
Available
Available
Available
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 90 A. SparkFun SEN-16408
zł136.90
6 weeks
No product available!
INA169 current sensor module. The system can be supplied with the voltage from 2.7 V to 60 V and has an analog output. SparkFun SEN-12040
zł58.68
24h
Available quantity: 1
Available
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
zł83.06
24h
Available quantity: 1
Available
Power monitor module that detects voltages up to 60 VDC and current up to 30 A. It uses the Allegro MicroSystems ACS37800 IC, which simplifies adding monitoring to power systems. SparkFun SPX-17873
zł179.00
6 weeks
No product available!
ACS714 Current Sensor Carrier -30 to +30A
zł53.03
24h
Available quantity: 2
Available
Module with an analog current sensor. It enables the measurement of alternating and direct currents up to 50 A. Cytron BB-ACS756
zł82.51
24h
Available quantity: 4
Available
Module with INA219 system with bi-directional current meter
zł11.62
6 weeks
No product available!
The current measurement of 0 - 30A is carried out by the ACS712-30 system based on the Hall effect. The sensitivity of the system is 66mV / A (analog signal).
zł8.00
6 weeks
No product available!
Module with ACHS-7123 current sensor with a measuring range of direct and alternating current from -30 to 30 A. It communicates via an analog interface. Pololu 4032
zł34.06
24h
Available quantity: 4
Available
This board is a simple carrier of Broadcom’s bidirectional ±50A ACHS-7125 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4034
zł35.65
24h
Available quantity: 4
Available
No product available!
ACS723 current sensor module with a DC and AC measuring range of ± 5 A. It can read very low currents of 10 mA. It communicates via the analog interface. SparkFun SEN-14544
zł117.16
4 weeks
No product available!
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
zł58.22
24h
Available quantity: 1
Available
Module with an analog current sensor. It enables the measurement of AC and DC current up to 50 A. DFRobot SEN0098