![Gravity: Analog 20A Current Sensor - module with analog 20A AC/DC current sensor Gravity: Analog 20A Current Sensor - module with analog 20A AC/DC current sensor](https://kamami.pl/29232-large_default/gravity-analog-20a-current-sensor-module-with-analog-20a-acdc-current-sensor-sen0214.jpg)
![Gravity: Analog 20A Current Sensor - module with analog 20A AC/DC current sensor Gravity: Analog 20A Current Sensor - module with analog 20A AC/DC current sensor](https://kamami.pl/29232-large_default/gravity-analog-20a-current-sensor-module-with-analog-20a-acdc-current-sensor-sen0214.jpg)
zł36.96 tax excl.
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Module with an analog current sensor. It enables the measurement of alternating and direct currents up to 20 A. The module has an analog output compatible with the Gravity standard. The measurement is based on the use of the Hall effect. At the bottom of the plate there is an acrylic insulation protecting against accidental short circuits. The module will be used in projects of controlling automation devices. On the Wiki page there is a user manual with a sample Arduino program.
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
No product available!
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 20 A. DFRobot SEN0211
Board with ATmega1280 microcontroller from the AVR family, the user has 54 I/O lines, 14 PWM channels, 16 analog inputs. DFRobot DFR0003
No product available!
Module with bi-directional current sensor based on the INA226 system. It allows you to measure current and power, works with a voltage of 0-36 V. It has an I2C interface.
This board is a simple carrier of Broadcom’s bidirectional ±50A ACHS-7125 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4034
ACS724LLCTR-05AU current sensor module with a current measurement range from 0 to 5 A. It communicates via an analog interface. Pololu 4048
Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049
Module with ACHS-7122 current sensor with a measuring range of direct and alternating current from -20 to 20 A. It communicates via an analog interface. Pololu 4031
ACS724LLCTR-2P5AB current sensor module with a DC and AC measurement range from -2.5 to +2.5 A. It communicates via an analog interface. Pololu 4040
ACS711EX Current Sensor Carrier -15.5A to +15.5A
This board is a simple carrier of Broadcom’s bidirectional ±40A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4033
Module with INA219 system with bi-directional current meter
No product available!
The current measurement with the value 0-20A is carried out by the ACS712-05 system based on the Hall effect. The sensitivity of the system is 100mV / A (analogue signal) .modACS712-20
Module with ACS724LLCTR-05AB current sensor with a measuring range of direct and alternating current from -5 to 5 A. It communicates via an analog interface. Pololu 4041
The module with the ACS725 current sensor with a direct current measuring range up to 10 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020616
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214