Have you been fed up with Black/White LCD screen? Do you want to try a colorful one? DFRobot I2C 16x2 Arduino LCD with RGB Backlight Display module will bring you a new experience about screen. It comes with RGB full color backlight, which has 16 million kinds of color.
Usually, Arduino LCD display projects will run out of pin resources easily, especially with Arduino Uno. And it is also very complicated with the wire soldering and connection. This I2C 16x2 LCD Screen is using an I2C communication interface. It means it only needs 4 pins for the LCD display: VCC, GND, SDA, SCL. It will saves at least 4 digital / analog pins on Arduino. And Gravity interface make it easier to use with our Gravity: IO expansion shield.
Data sheet
Manufacturer
Responsible person
LCD character display 2x16, 1x16 pin header for evaluation boards
Alphanumeric LCD display 2x16 with a pin connector, gray signs, green-yellow background
Alphabetical display 2x16 characters with green backlight. The displayed text is black. The screen has a driver based on the popular HD44780 chip. SparkFun LCD-00255
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
12.3″ IPS touch display with 720 × 1920 resolution and DSI interface, designed for use with Raspberry Pi 5 / CM5 and selected platforms based on RK3576. The panel supports 10-point capacitive touch, features toughened glass with optical bonding technology, and includes a metal rear plate that improves structural rigidity and heat dissipation. The display offers 450 cd/m² brightness and 178° viewing angles. Waveshare 12.3-DSI-TOUCH-A
No product available!
Industrial 7″ IPS HMI touch display with 720 × 1280 resolution, designed for use with Raspberry Pi 4 and Raspberry Pi 5. The screen supports 10-point capacitive touch, features toughened glass with optical bonding, and an aluminum enclosure for passive cooling. The display connects via dual HDMI interfaces and supports video output up to 4K. The kit includes a power supply, 64 GB microSD card, and mounting accessories, while Raspberry Pi is not included. Waveshare RPI-HMI-7A-ACCE (EU)
No product available!
A 7-inch round capacitive touch display featuring an IPS panel with a 1080 × 1080 pixel resolution and support for up to 10 touch points. The display uses an HDMI interface for video and USB Type-C for touch control. It offers 800 cd/m² brightness, a 160° wide viewing angle, and toughened glass with Optical Bonding technology. Waveshare 7inch 1080x1080 LCD
No product available!
5" e-Paper display with 960 x 552 px resolution and SPI interface, designed for integration with external controller circuits. Low power consumption, no backlight. Waveshare 5inch e-Paper
No product available!
5" e-Paper display with 960 x 552 px resolution, HAT driver board, SPI interface and support for Raspberry Pi and other platforms. Low power consumption, no backlight. Waveshare 5inch e-Paper HAT
No product available!
1.83" IPS LCD display module with 240 x 284 px resolution, capacitive touch panel, SPI and I2C interfaces, designed for microcontrollers and SBC. Waveshare 1.83inch Touch LCD Module
27" Full HD touch monitor featuring an IPS panel and a 10-point capacitive touchscreen with Optical Bonding technology. HDMI and USB-C interfaces enable compatibility with computers and embedded platforms, including Raspberry Pi. The aluminum enclosure and 12 V EU power supply support use in HMI systems, kiosks, and industrial applications. Waveshare 27inch FHD Monitor (EU)
23.8" Full HD touch monitor featuring an IPS panel and a 10-point capacitive touchscreen with Optical Bonding technology. HDMI and USB-C interfaces enable compatibility with computers and embedded platforms, including Raspberry Pi. Aluminum enclosure and 12 V EU power supply support use in HMI systems, kiosks, and industrial applications. Waveshare 23.8inch FHD Monitor (EU)
This control board is designed to drive 10.3-inch monochrome ePaper displays with a resolution of 1404 × 1872 pixels and support for up to 16 grayscale levels. The module is based on the XIAO ESP32-S3 Plus chip, which provides high performance and Wi-Fi and Bluetooth wireless communication. The board is equipped with an SHT40 temperature sensor for display compensation, a 2.0 mm JST battery connector with charging circuitry, and a power switch. The pre-installed SenseCraft HMI software allows for drag-and-drop user interface creation without programming. Seeed Studio 100080566
A 10.3-inch ePaper display with a resolution of 1404 x 1872 pixels, designed for presenting text and graphics with high readability. The screen supports up to 16 levels of grayscale, allowing for the display of more detailed illustrations, icons, and graphs. The display uses a TTL interface and a 40-pin FPC connector, enabling integration with systems based on the XIAO, Arduino, and MicroPython platforms. Seeed Studio 100071485
11.6" IPS display with 1920 x 1080 px resolution, capacitive touch panel, HDMI and VGA interfaces and 12 V power supply for Raspberry Pi and computers. Elecrow DISSF116P
8" IPS display with 1280 x 800 px resolution, HDMI interface, built-in speakers and USB power supply for Raspberry Pi and computers. Elecrow SH080
8.8" IPS display with 1920 x 480 px resolution, HDMI interface and micro USB power supply for Raspberry Pi, computers and multimedia devices. Elecrow DIS88240P
8" IPS display with 1280 x 800 px resolution, capacitive touch panel, HDMI interface and USB-C/DC power supply for Raspberry Pi and computers. Elecrow SH080T
A portable dual-panel IPS Full HD monitor designed to expand the workspace of your laptop or computer. It offers two 15.6-inch displays with a 1920 x 1080 resolution, 300 nits of brightness, and 100% sRGB coverage, delivering high-quality images and wide viewing angles. A foldable design with 360° rotation and Mirror, Extend, Presentation, and Merge modes provide flexible adjustments to various work scenarios. The monitor supports plug-and-play connectivity via USB-C or HDMI and is compatible with Windows, macOS, Linux, Android, and game consoles. Elecrow CRV12615Y
Programmable mechanical key with a 0.85″ IPS LCD display, 128 × 128px resolution, and 65K colors. Features an ST7735 controller, SPI interface, LED backlight, and 2.5D tempered glass. The mechanical switch is rated for up to 50 million presses. Black version with a mechanical switch and PCB module, supplied with a 200mm 9-pin cable. Waveshare 0.85inch ScreenKey Module B
DFR0464