Gravity: I2C 16x2 Arduino LCD with RGB Backlight Display
ID: 565774
5902186312968
zł61.12
Tax included
zł49.69 tax excl.
DFR0464
INTRODUCTION:
Have you been fed up with Black/White LCD screen? Do you want to try a colorful one? DFRobot I2C 16x2 Arduino LCD with RGB Backlight Display module will bring you a new experience about screen. It comes with RGB full color backlight, which has 16 million kinds of color.
Usually, Arduino LCD display projects will run out of pin resources easily, especially with Arduino Uno. And it is also very complicated with the wire soldering and connection. This I2C 16x2 LCD Screen is using an I2C communication interface. It means it only needs 4 pins for the LCD display: VCC, GND, SDA, SCL. It will saves at least 4 digital / analog pins on Arduino. And Gravity interface make it easier to use with our Gravity: IO expansion shield.
SPECIFICATION:
Operating Voltage: 3.3V ~ 5.0V Operating Current: <0.8mA Display: 16 * 2 Communication: IIC / I2C Backlight: RGB adjustable backlight (16 million) Operating Temperature: -20 to + 70 ? Storage Temperature: -30 to + 80 ? Dimension: 87.0 * 32.0 * 13.0mm/3.42 * 1.26 * 0.51 inchesSHIPPING LIST:
Gravity: I2C 16x2 Arduino LCD with RGB Backlight Display x1 Gravity 4Pin IIC/I2C/UART Sensor Cable x1
565774
Data sheet
- Screen type
- LCD alfanumeric
- Diagonal (inch)
- Nie dotyczy
- Resolution
- 2 x 16 characters
- Interface
- I2C
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
LCD character display 2x16, 1x16 pin header for evaluation boards
zł35.31
24h
Available quantity: 28
Available
Alphanumeric LCD display 2x16 with a pin connector, gray signs, green-yellow background
zł27.55
24h
Available quantity: 2
Available
Alphabetical display 2x16 characters with green backlight. The displayed text is black. The screen has a driver based on the popular HD44780 chip. SparkFun LCD-00255
zł109.42
24h
Available quantity: 1
Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł21.65
24h
Available quantity: 3
Available
Other products in the same category (16)
5" TFT LCD display with touch panel. It is equipped with a parallel interface to display the image. It has a resolution of 800x480 pixels. SeeedStudio 104990262
zł498.51
4 weeks
No product available!
The 5-inch IPS LCD display has a resolution of 800 x 480 pixels. It has a thin and lightweight design and communicates via the DSI interface. Waveshare 50H-800480-IPS
zł132.75
24h
Available quantity: 2
Available
Black and white e-Paper display with a diagonal of 7.8" and a resolution of 1872x1404 px. Parallel interface. Without PCB. Waveshare 7.8inch e-paper
zł538.81
24h
Available quantity: 1
Available
100x16 Graphic OLED Display, 80x36mm, Negative Black Surface, Yellow Dot, 5V, RoHS
zł72.56
24h
Available quantity: 2
Available
400x300, 4.2inch E-Ink raw display
zł104.22
24h
Available quantity: 4
Available
7-segment LED display, 1 digit 20.40mm, two dots, red (640nm), 6000ucd (10mA), common anode, Pb-free. LED1-AS-B-08012BS
zł1.70
24h
Available quantity: 20
Available
13.3" e-Paper display with HAT module is a comprehensive solution for presenting static or dynamic information in high sunlight environments. E Ink technology provides a paper-like effect and very low power consumption. The set is compatible with Raspberry Pi, Jetson Nano, Arduino, and STM32, ideal for projects requiring a large, passively refreshed display.
zł792.99
4 weeks
No product available!
The module with a 16x2 character LCD display with blue backlight. It is equipped with an AiP31068 controller that implements communication via the I2C interface. Waveshare LCD1602 I2C Module
zł32.18
24h
Available quantity: 6
Available
5.79-inch black and white e-Paper module with a resolution of 792x272 px. With a wide viewing angle, this display works well in a variety of lighting conditions, providing readability comparable to traditional paper. Waveshare 5.79inch e-Paper Module
zł131.65
24h
Available quantity: 2
Available
7" TFT LCD display with touch screen. The display is equipped with DSI interface for image display and I2C interface for touch screen. Resolution 800x480 pixels. Waveshare 7inch DSI LCD
zł277.27
24h
Available quantity: 2
Available
The 16x2 alphanumeric display with green LED backlight is compatible with the HD44780 controller and has compact dimensions of 85 x 44 mm. The built-in connector makes connection easy, making it ideal for many electronic applications.
zł9.91
24h
Available quantity: 12
Available
Waveshare 30411 is a large, energy-efficient 10.85-inch e-paper display that provides four-color display without the need for continuous power. Designed for shelf labeling, equipment tags, and information panels, it offers a wide viewing angle and low power consumption.
zł459.44
4 weeks
No product available!
Module with 8x8 RGB LED matrix, MY9221 LED drivers and STM32F031 microcontroller. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 105020073
zł70.79
24h
Available quantity: 3
Available
Alphanumeric display 16 characters in two rows, content yellow, black background.
zł23.90
24h
Available quantity: 2
Available
The expansion module (shield) is designed for Feather nRF52840 boards. It enables easy connection of 16x32, 32x32 and 64x32 matrix displays. Requires self-assembly. Adafruit 4702
zł41.46
24h
Available quantity: 2
Available
A graphic display module offering black characters on a white background with LED backlighting, ideal for applications requiring a clear and readable image. The T6963C controller and SPI interface guarantee easy integration and stable operation. AV-Display LCD-CG-240128D-FHW K/W-E6
zł210.16
24h
Available quantity: 2
Available
DFR0464