e-Paper E-Ink 4-color display 4.37" 512x368 (G) - Waveshare 22753
ID: 1181852
5906623423194
zł145.46
Tax included
zł118.26 tax excl.
4-color e-Paper display with a diagonal of 4.37 "and a resolution of 512x368 px. Communicates via the SPI interface. Waveshare 4.37inch e-Paper (G)
Description
4-color (red, yellow, black and white) e-Paper display with a diagonal of 4.37" and a resolution of 512x368 pixels. It has the ability to display content with two-level grayscale, and the built-in controller communicates via the SPI interface. Offers a wide viewing angle The e-Paper displays are characterized by high contrast of the displayed image and only consume power when the displayed content is changed. It is compatible with 3.3V systems. On the product page, support is available in the form of examples of use with Raspberry Pi, Jetson Nano, Arduino and STM32.
Features
- Diagonal: 4.37"
- Resolution: 512x368 px
- Display color: red, yellow, black, white
- Gray levels: 2
- Interface: 3-wire SPI, 4-wire SPI
- Pixel size: 0.176 x 0.176 mm
- Full refresh time: 14 seconds
- Power consumption: 61.7 mW
- Viewing angle:> 170 °
- No backlight, displays the last content after power off
- Low energy consumption
- Working voltage: 3.3V
- Display size: 90.11 x 64.77 mm
- Outline dimension: 99.5 x 79.5 x 0.85 mm
1181852
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 4,37
- Resolution
- 512 x 368 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 101
Available
STM32 Nucleo-64 development board with STM32L476RGT6 MCU, supports Arduino and ST morpho connectivity
zł93.90
24h
Available quantity: 27
Available
NUCLEO series starter kit equipped with STM32G474RE microcontroller (512 kB Flash, Cortex-M4), with built-in programmer-debugger ST-Link-V3E, equipped with connectors compatible with Arduino.
zł99.77
24h
Available quantity: 24
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,226.30
24h
Available quantity: 10
Available
Other products in the same category (16)
ESP32-S3 3.97" 800×480 with e-Paper display, Wi-Fi 2.4 GHz, Bluetooth 5 and Basic Kit set (3.7 V lithium battery + 16 GB TF card + card reader) – development board with built-in RTC, IMU, temperature and humidity sensor, and AI voice interaction support. Waveshare ESP32-S3-ePaper-3.97-Kit
zł203.27
6 weeks
No product available!
ESP32-S3 3.97" 800×480 with e-Paper display, Wi-Fi 2.4 GHz, Bluetooth 5 – development board with built-in RTC, IMU, temperature and humidity sensor, and AI voice interaction support (without battery). Waveshare ESP32-S3-ePaper-3.97-EN
zł167.03
6 weeks
No product available!
ESP32-S3 3.97" 800×480 with e-Paper display, Wi-Fi 2.4 GHz, Bluetooth 5 and 3.7 V battery supply – development board with integrated RTC, IMU, temperature and humidity sensor, and AI voice interaction support. Waveshare ESP32-S3-ePaper-3.97
zł173.09
6 weeks
No product available!
A 13.3-inch color ePaper display powered by E Ink Spectra™ 6 technology, providing excellent readability and low power consumption. The device is equipped with an ESP32-S3 processor, Wi-Fi and Bluetooth connectivity, and a built-in 5000 mAh battery that provides up to 6 months of operation on a single charge. Thanks to the SenseCraft HMI platform, it allows for quick content creation and remote updating without programming. SeeedStudio 100064156
zł1,381.83
4 weeks
No product available!
An educational kit with a 2.7-inch e-Paper display with a resolution of 264 x 176 pixels and four grayscale levels, ideal for presenting schedules, QR codes, and IoT messages. The device is based on a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB of SRAM, 16 MB of QSPI Flash, and 8 MB of PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery, charged via USB-C, enables long, energy-efficient operation, and the RTC allows for the development of cyclic applications. Pimoroni WARE001
zł356.28
4 weeks
No product available!
An educational kit with a 2.7-inch e-Paper display with a resolution of 264 x 176 pixels and four grayscale levels, ideal for presenting schedules, QR codes, and IoT messages. The device is based on a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB of SRAM, 16 MB of QSPI Flash, and 8 MB of PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery, charged via USB-C, enables long, energy-efficient operation, and the RTC allows for the development of cyclic applications. Pimoroni WARE004
zł485.94
4 weeks
No product available!
Waveshare 31738 e-paper display with a 3.97″ diagonal and 800 × 480 pixel resolution, operating in black and white with 4 gray levels, designed for use with an external controller via SPI interface. Waveshare 3.97inch e-Paper
zł78.55
6 weeks
No product available!
Waveshare 31063 e-paper display with a 3.97″ diagonal and 800 × 480 pixel resolution, operating in black and white with 4 gray levels, equipped with a Raspberry Pi HAT+ compatible driver board and SPI interface. Waveshare 3.97inch e-Paper HAT+
zł115.85
6 weeks
No product available!
3.97" e-Paper (E-Ink) display module with a resolution of 800 × 480 px, supporting red / yellow / black / white colors. Designed for integration with SPI-based systems such as Raspberry Pi, Arduino, STM32 and ESP32. Features ultra-low power consumption and a paper-like display effect without backlight. Waveshare 3.97inch e-Paper (G)
zł78.55
6 weeks
No product available!
3.97" e-Paper (E-Ink) display module with 800 × 480 px resolution, supporting red / yellow / black / white colors. HAT+ version with integrated driver board, SPI interface and standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi, Jetson Nano, Arduino, STM32 and ESP32. Features ultra-low power consumption and paper-like display without backlight. Waveshare 3.97inch e-Paper HAT+ (G)
zł115.85
6 weeks
No product available!
3.5" E-Ink e-paper display with a resolution of 384x184 px supporting red, yellow, black and white colors. The panel is designed for use with an external driver board or controller supporting the SPI interface. Waveshare 3.5inch e-Paper (G)
zł50.33
6 weeks
No product available!
3.5" E-Ink e-paper display with a resolution of 384x184 px supporting red, yellow, black and white colors. The module includes a driver board with SPI interface and an onboard level translator allowing operation with 3.3 V and 5 V microcontrollers. Waveshare 3.5inch e-Paper Module (G)
zł81.48
6 weeks
No product available!
3.7" E-Ink e-paper display with a resolution of 416×240 px supporting red, yellow, black and white colors. The display communicates via the SPI interface and is designed to operate with an external driver board or microcontroller. Waveshare 3.7inch e-Paper (G)
zł52.32
6 weeks
No product available!
3.7" E-Ink display with a resolution of 416×240 px supporting red, yellow, black and white colors. The module with HAT+ driver board features an SPI interface and a Raspberry Pi 40-pin GPIO connector, compatible with Raspberry Pi, Jetson Nano, Arduino, STM32 and ESP32 platforms. Waveshare 3.7inch e-Paper HAT+ (G)
zł93.58
6 weeks
No product available!
A 10.3-inch ePaper display with a resolution of 1404 x 1872 pixels, designed for presenting text and graphics with high readability. The screen supports up to 16 levels of grayscale, allowing for the display of more detailed illustrations, icons, and graphs. The display uses a TTL interface and a 40-pin FPC connector, enabling integration with systems based on the XIAO, Arduino, and MicroPython platforms. Seeed Studio 100071485
zł406.23
24h
Available quantity: 2
Available
A 10.3-inch ePaper touchscreen display with a resolution of 1404 x 1872 pixels offers a clear image with very low power consumption. Equipped with an ESP32-S3 microcontroller with 8 MB of PSRAM, Wi-Fi and Bluetooth connectivity enable easy integration with IoT systems and remote management. The device has a 3000 mAh battery for up to 6 months of operation and supports interfaces created in the SenseCraft HMI, Arduino, and PlatformIO environments. Seeed Studio 100090602
zł779.16
4 weeks
No product available!
4-color e-Paper display with a diagonal of 4.37 "and a resolution of 512x368 px. Communicates via the SPI interface. Waveshare 4.37inch e-Paper (G)