zł269.01
5.79" 792x272 black-red-white e-Paper SPI module - Waveshare 26891
ID: 1190044
5906623486700
zł141.51
Tax included
zł115.05 tax excl.
The 5.79-inch E-Paper module (B) display is an energy-efficient solution ideal for applications where long-term content display is required without the need for power, such as price tags or industrial labels. With the ability to display in three colors and a wide viewing angle, this display performs exceptionally well in various lighting conditions, providing readability comparable to traditional paper. Waveshare 5.79inch e-Paper Module (B)
Description
The 5.79-inch E-Paper module (B) is an advanced e-ink module offering a resolution of 792x272 pixels and three display colors: red, black, and white. Utilizing passive reflective technology, the display delivers a paper-like effect with a wide viewing angle of over 170°. It is perfect for applications such as price tags, shelf labels, industrial instruments, and more. The display communicates via an SPI interface and consumes very low power, requiring power only for refreshing the content.
Features
- Size: 5.79 inches
- Resolution: 792x272 pixels
- Display Colors: Red, Black, White
- Viewing Angle: >170°
- Gray Scale: 2 levels
- Communication: SPI (3-wire, 4-wire)
- Display Type: Passively reflective (requires ambient light)
- Outline Dimensions: 150.92 × 56.94 × 1.00 mm
- Display Size: 139.00 × 47.74 mm
- Full Refresh Time: 24 seconds
- Operating Voltage: 3.3V/5V
- Refresh Power Consumption: <50 mW
- Standby Current: <0.01 uA (almost none)
- Technology: Microencapsulated electrophoretic technology
Advantages of EINK
The E-paper display uses electrophoretic technology, where charged particles in a clear fluid move under the influence of an electric field, reflecting light like traditional paper. The display does not require backlighting, offers a wide viewing angle close to 180°, and is ideal for e-readers due to its paper-like effect.
Onboard SPI Control Interface
- PWR: Power on/off control
- BUSY: Busy status output
- RST: External reset, active low
- DC: Data/Command selection (high for data, low for command)
- CS: SPI chip selection, active low
- CLK: SPI SCK pin
- DIN: SPI MOSI pin
- GND: Ground
- VCC: Power (3.3V / 5V input)
Built-in Voltage Translator - Compatible with 3.3V/5V microcontrollers.
Usage Example - Connecting to Raspberry Pi 5
Outline dimensions
Included
- 5.79inch e-Paper Module (B) x1
- GH1.25 9PIN cable 20cm x1
1190044
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- Resolution
- 792 x 272 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
ESP32-S3 3.97" 800×480 with e-Paper display, Wi-Fi 2.4 GHz, Bluetooth 5 and 3.7 V battery supply – development board with integrated RTC, IMU, temperature and humidity sensor, and AI voice interaction support. Waveshare ESP32-S3-ePaper-3.97
zł173.09
6 weeks
No product available!
A 13.3-inch color ePaper display powered by E Ink Spectra™ 6 technology, providing excellent readability and low power consumption. The device is equipped with an ESP32-S3 processor, Wi-Fi and Bluetooth connectivity, and a built-in 5000 mAh battery that provides up to 6 months of operation on a single charge. Thanks to the SenseCraft HMI platform, it allows for quick content creation and remote updating without programming. SeeedStudio 100064156
zł1,369.33
4 weeks
No product available!
An educational kit with a 2.7-inch e-Paper display with a resolution of 264 x 176 pixels and four grayscale levels, ideal for presenting schedules, QR codes, and IoT messages. The device is based on a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB of SRAM, 16 MB of QSPI Flash, and 8 MB of PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery, charged via USB-C, enables long, energy-efficient operation, and the RTC allows for the development of cyclic applications. Pimoroni WARE001
zł356.28
4 weeks
No product available!
An educational kit with a 2.7-inch e-Paper display with a resolution of 264 x 176 pixels and four grayscale levels, ideal for presenting schedules, QR codes, and IoT messages. The device is based on a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB of SRAM, 16 MB of QSPI Flash, and 8 MB of PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery, charged via USB-C, enables long, energy-efficient operation, and the RTC allows for the development of cyclic applications. Pimoroni WARE004
zł485.94
4 weeks
No product available!
Waveshare 31738 e-paper display with a 3.97″ diagonal and 800 × 480 pixel resolution, operating in black and white with 4 gray levels, designed for use with an external controller via SPI interface. Waveshare 3.97inch e-Paper
zł78.55
6 weeks
No product available!
Waveshare 31063 e-paper display with a 3.97″ diagonal and 800 × 480 pixel resolution, operating in black and white with 4 gray levels, equipped with a Raspberry Pi HAT+ compatible driver board and SPI interface. Waveshare 3.97inch e-Paper HAT+
zł115.85
6 weeks
No product available!
3.97" e-Paper (E-Ink) display module with a resolution of 800 × 480 px, supporting red / yellow / black / white colors. Designed for integration with SPI-based systems such as Raspberry Pi, Arduino, STM32 and ESP32. Features ultra-low power consumption and a paper-like display effect without backlight. Waveshare 3.97inch e-Paper (G)
zł78.55
6 weeks
No product available!
3.97" e-Paper (E-Ink) display module with 800 × 480 px resolution, supporting red / yellow / black / white colors. HAT+ version with integrated driver board, SPI interface and standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi, Jetson Nano, Arduino, STM32 and ESP32. Features ultra-low power consumption and paper-like display without backlight. Waveshare 3.97inch e-Paper HAT+ (G)
zł115.85
6 weeks
No product available!
3.5" E-Ink e-paper display with a resolution of 384x184 px supporting red, yellow, black and white colors. The panel is designed for use with an external driver board or controller supporting the SPI interface. Waveshare 3.5inch e-Paper (G)
zł50.33
6 weeks
No product available!
3.5" E-Ink e-paper display with a resolution of 384x184 px supporting red, yellow, black and white colors. The module includes a driver board with SPI interface and an onboard level translator allowing operation with 3.3 V and 5 V microcontrollers. Waveshare 3.5inch e-Paper Module (G)
zł81.48
6 weeks
No product available!
3.7" E-Ink e-paper display with a resolution of 416×240 px supporting red, yellow, black and white colors. The display communicates via the SPI interface and is designed to operate with an external driver board or microcontroller. Waveshare 3.7inch e-Paper (G)
zł52.32
6 weeks
No product available!
3.7" E-Ink display with a resolution of 416×240 px supporting red, yellow, black and white colors. The module with HAT+ driver board features an SPI interface and a Raspberry Pi 40-pin GPIO connector, compatible with Raspberry Pi, Jetson Nano, Arduino, STM32 and ESP32 platforms. Waveshare 3.7inch e-Paper HAT+ (G)
zł93.58
6 weeks
No product available!
5" e-Paper display with 960 x 552 px resolution and SPI interface, designed for integration with external controller circuits. Low power consumption, no backlight. Waveshare 5inch e-Paper
zł122.53
6 weeks
No product available!
5" e-Paper display with 960 x 552 px resolution, HAT driver board, SPI interface and support for Raspberry Pi and other platforms. Low power consumption, no backlight. Waveshare 5inch e-Paper HAT
zł153.39
6 weeks
No product available!
A 10.3-inch ePaper display with a resolution of 1404 x 1872 pixels, designed for presenting text and graphics with high readability. The screen supports up to 16 levels of grayscale, allowing for the display of more detailed illustrations, icons, and graphs. The display uses a TTL interface and a 40-pin FPC connector, enabling integration with systems based on the XIAO, Arduino, and MicroPython platforms. Seeed Studio 100071485
zł406.23
4 weeks
No product available!
A 10.3-inch ePaper touchscreen display with a resolution of 1404 x 1872 pixels offers a clear image with very low power consumption. Equipped with an ESP32-S3 microcontroller with 8 MB of PSRAM, Wi-Fi and Bluetooth connectivity enable easy integration with IoT systems and remote management. The device has a 3000 mAh battery for up to 6 months of operation and supports interfaces created in the SenseCraft HMI, Arduino, and PlatformIO environments. Seeed Studio 100090602
zł779.16
4 weeks
No product available!
The 5.79-inch E-Paper module (B) display is an energy-efficient solution ideal for applications where long-term content display is required without the need for power, such as price tags or industrial labels. With the ability to display in three colors and a wide viewing angle, this display performs exceptionally well in various lighting conditions, providing readability comparable to traditional paper. Waveshare 5.79inch e-Paper Module (B)