.png)
e-Paper E-Ink 4-color display module 2.36" 296x168 (G) - Waveshare 23151
ID: 1181851
5906623423187
zł71.09
Tax included
zł57.80 tax excl.
Module with a 4-color e-Paper display with a diagonal of 2.36" and a resolution of 296x168 px. It communicates via the SPI interface. Waveshare 2.36inch e-Paper Module (G)
Description
Module with 4-color (red, yellow, black and white) e-Paper display with a diagonal of 2.36" and a resolution of 296x168 pixels. viewing angle The e-Paper displays have a high contrast of the displayed image and only consume power when the displayed content is changed. It is compatible with 3.3V and 5V systems. On the product page, support is available in the form of examples of use with Raspberry Pi, Jetson Nano, Arduino i STM32.
Features
- Diagonal: 2.36"
- Resolution: 296x168 px
- Display color: red, yellow, black, white
- Gray levels: 2
- Interface: 3-wire SPI, 4-wire SPI
- Pixel size: 0.176 x 0.176 mm
- Full refresh time: 12 seconds
- Power consumption: 57 mW
- Viewing angle:> 170°
- No backlight, displays the last content after power off
- Low energy consumption
- Working voltage: 3.3V, 5V
- Display size: 52.096 x 29.568 mm
- Outline dimensions: 69.5 x 39.5 mm
Kit contains
- 2.36inch e-Paper Module (G) Display
- Cable MX1.25 20 cm 8-pin
1181851
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 2,36
- Resolution
- 296 x 168 px
- Interface
- SPI
- Touch
- No
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
NUCLEO series starter kit equipped with STM32G474RE microcontroller (512 kB Flash, Cortex-M4), with built-in programmer-debugger ST-Link-V3E, equipped with connectors compatible with Arduino.
zł106.00
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł177.00
Delivery date unknown
No product available!
4-color e-Paper display with a diagonal of 2.36" and a resolution of 296x168 px. Communicates via the SPI interface. Waveshare 2.36inch e-Paper (G)
Regular pricezł48.33zł38.54
24h
Available quantity: 2
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł2,328.35
24h
Available quantity: 6
Available
Other products in the same category (16)
3.97" e-Paper (E-Ink) display module with a resolution of 800 × 480 px, supporting red / yellow / black / white colors. Designed for integration with SPI-based systems such as Raspberry Pi, Arduino, STM32 and ESP32. Features ultra-low power consumption and a paper-like display effect without backlight. Waveshare 3.97inch e-Paper (G)
zł80.25
6 weeks
No product available!
3.97" e-Paper (E-Ink) display module with 800 × 480 px resolution, supporting red / yellow / black / white colors. HAT+ version with integrated driver board, SPI interface and standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi, Jetson Nano, Arduino, STM32 and ESP32. Features ultra-low power consumption and paper-like display without backlight. Waveshare 3.97inch e-Paper HAT+ (G)
zł118.39
6 weeks
No product available!
3.5" E-Ink e-paper display with a resolution of 384x184 px supporting red, yellow, black and white colors. The panel is designed for use with an external driver board or controller supporting the SPI interface. Waveshare 3.5inch e-Paper (G)
zł50.92
24h
Available quantity: 5
Available
3.5" E-Ink e-paper display with a resolution of 384x184 px supporting red, yellow, black and white colors. The module includes a driver board with SPI interface and an onboard level translator allowing operation with 3.3 V and 5 V microcontrollers. Waveshare 3.5inch e-Paper Module (G)
zł81.27
6 weeks
No product available!
3.7" E-Ink e-paper display with a resolution of 416×240 px supporting red, yellow, black and white colors. The display communicates via the SPI interface and is designed to operate with an external driver board or microcontroller. Waveshare 3.7inch e-Paper (G)
zł52.95
24h
Available quantity: 2
Available
3.7" E-Ink display with a resolution of 416×240 px supporting red, yellow, black and white colors. The module with HAT+ driver board features an SPI interface and a Raspberry Pi 40-pin GPIO connector, compatible with Raspberry Pi, Jetson Nano, Arduino, STM32 and ESP32 platforms. Waveshare 3.7inch e-Paper HAT+ (G)
zł93.32
6 weeks
No product available!
5" e-Paper display with 960 x 552 px resolution and SPI interface, designed for integration with external controller circuits. Low power consumption, no backlight. Waveshare 5inch e-Paper
zł125.32
6 weeks
No product available!
5" e-Paper display with 960 x 552 px resolution, HAT driver board, SPI interface and support for Raspberry Pi and other platforms. Low power consumption, no backlight. Waveshare 5inch e-Paper HAT
zł156.90
6 weeks
No product available!
A 10.3-inch ePaper display with a resolution of 1404 x 1872 pixels, designed for presenting text and graphics with high readability. The screen supports up to 16 levels of grayscale, allowing for the display of more detailed illustrations, icons, and graphs. The display uses a TTL interface and a 40-pin FPC connector, enabling integration with systems based on the XIAO, Arduino, and MicroPython platforms. Seeed Studio 100071485
zł413.78
24h
Available quantity: 1
Available
A 10.3-inch ePaper touchscreen display with a resolution of 1404 x 1872 pixels offers a clear image with very low power consumption. Equipped with an ESP32-S3 microcontroller with 8 MB of PSRAM, Wi-Fi and Bluetooth connectivity enable easy integration with IoT systems and remote management. The device has a 3000 mAh battery for up to 6 months of operation and supports interfaces created in the SenseCraft HMI, Arduino, and PlatformIO environments. Seeed Studio 100090602
zł768.57
4 weeks
No product available!
Development kit featuring a 13.3" full-color E-Paper display with 1600 × 1200 px resolution and an ESP32-S3-based driver board. Utilizes E Ink Spectra 6 (E6) technology, supports 2.4 GHz WiFi and Bluetooth LE, and includes a TF card slot, audio codecs, and a Li-Ion battery charging circuit. Waveshare ESP32-S3-ePaper-13.3E6
zł1,344.11
6 weeks
No product available!
Programmable module with a 6-inch 800 × 600px e-paper display supporting black-and-white mode, 8 grayscale levels and partial refresh. Based on ESP32-WROVER with WiFi and Bluetooth, it also provides microSD, RTC, Qwiic/easyC and USB-C connectivity. Version with enclosure and 1200mAh Li-Ion battery. Soldered 333229
zł580.49
24h
Available quantity: 1
Available
Programmable 5.65" color e-paper module with a 600 × 448px AC057TC1 display supporting 7 colors. Based on ESP32-WROVER with WiFi and Bluetooth, it includes microSD, RTC, USB-C, easyC / Qwiic and a 3.7V 1200mAh Li-Ion battery with a 3D-printed enclosure. Soldered 333231
zł704.91
24h
Available quantity: 1
Available
Programmable module with a large 9.7-inch 1200 × 825px e-paper display, based on ESP32 with WiFi and Bluetooth. It supports grayscale and partial refresh, and provides microSD, RTC, Qwiic, USB-C, Arduino and MicroPython support. Version with enclosure and 3000mAh Li-Ion battery. Soldered 333247
zł912.32
24h
Available quantity: 1
Available
Programmable 6" 1024 × 758px touchscreen e-paper module based on ESP32 with WiFi and Bluetooth. Features two-point capacitive touch, 64-step frontlight control, microSD, RTC, Qwiic/easyC and support for Arduino, MicroPython and ESP-IDF. Version with enclosure and Li-Ion battery. Soldered 333320
zł933.05
24h
Available quantity: 1
Available
Programmable 6-inch e-paper display with a resolution of 1024 x 758 px, supporting 16 grayscale levels and fast partial refresh in 91 ms, corresponding to up to 11 FPS. The board uses an STM32H743ZIT6 microcontroller and ESP32-C3 coprocessor, providing WiFi, Bluetooth, integrated sensors, a microSD slot, USB-C, and more than 30 GPIO lines. Soldered 333321
zł799.00
24h
Available quantity: 1
Available
Module with a 4-color e-Paper display with a diagonal of 2.36" and a resolution of 296x168 px. It communicates via the SPI interface. Waveshare 2.36inch e-Paper Module (G)