NPN to PNP Signal Converter - signal converter
ID: 1178447
zł49.18
Tax included
zł39.98 tax excl.
NPN to PNP signal converter. Equipped with overvoltage protection and overcurrent protection. DFRobot FIT0850
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
NPN to PNP signal converter with overvoltage protection and overcurrent protection. It allows you to easily eliminate problems when the controller and the type of sensor used have a mismatched signal. It is supplied with the voltage from 5 to 24 V. Full documentation with examples of use is available on the product page.
Features
- Operating voltage: 5 to 24 V DC
- Current protection: over-current protection, over-voltage absorption
- Load current: max. 100 mA
- Working temperature: -20 ℃ to 70 ℃
- Working humidity: 35 to 85% RH
- Response time: 1 us
- Model: BM-NP
- Conversion: NPN.NO-PNP.NO
Kit contains
- NPN to PNP Converter
- Wire Connector
1178447
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł113.90
24h
Available quantity: 66
Available
Available
Evaluation kit with Bluetooth 4.0 module. It has 8 digital pins, 4 analog pins and 4 PWM. Compatible with Arduino, it is perfect as a platform for building a small robot. DFRobot DFR0351
zł117.07
24h
Available quantity: 2
Available
Other products in the same category (16)
A set of lenses for Arducam cameras. Includes 5 lenses with different viewing angles, two lens holders and a set of screws. Lenses compatible and tested with image sensors such as OV2640 and OV5647. Arducam LK002
zł327.33
24h
Available quantity: 2
Available
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 2 to 8 Ω. Powered with DC voltage from 12 to 24 V. Fosi Audio BT20A
zł459.00
Delivery date unknown
No product available!
The Step-Down Converter allows you to adjust the output voltage (1.5-35V) and output current (up to 10A, 8A recommended), supporting a maximum of 150W (100W recommended) with an operating temperature of -20 to 75°C and a conversion efficiency of up to 95%. It has short-circuit protection but no reverse input protection.
zł64.89
24h
Available quantity: 3
Available
Audio amplifier module with three output channels. It can be powered from 12 to 24 V and has two 50 W outputs (left and right) and one 100 W output (bass). Equipped with Bluetooth 5.0 communication
zł119.00
24h
Available quantity: 4
Available
Available
Mini Maestro 18-Channel USB Servo Controller (Partial Kit)
zł192.54
6 weeks
No product available!
Pololu Carrier with Sharp GP2Y0D810Z0F Digital Distance Sensor 10cm
zł50.17
24h
Available quantity: 6
Available
UART-RS232 converter module. The board was equipped with a Grove and DB9 connector. Seeed Studio 103020192
zł43.95
6 weeks
No product available!
Available
Module with a capacitive fingerprint reader with UART and USB interface. Waveshare Capacitive Fingerprint Reader
zł261.71
4 weeks
No product available!
DC-DC Step-Up/Step-Down Converter Module. It has an input voltage of 1.4 to 16 V, an output voltage of 5 V and a maximum output current of 1 A to 1.5 A. Pololu 4965
zł32.82
24h
Available quantity: 1
Available
Module with a bistable button and green LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-G
zł21.00
24h
Available quantity: 2
Available
Tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. Operating voltage range from 0 V to 11 V, built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature. Pololu 2990
zł21.48
24h
Available quantity: 2
Available
Module with 32 IO pins and 14 analog inputs. It communicates via the RS485, USB or Ethernet interface and supports the Modbus RTU/TCP protocol. Numato Lab NLGM1002-A
zł1,572.59
6 weeks
No product available!
AP63357 DC-DC Step-Down Converter Module with 5V output, 6 to 32V input and 3.5A maximum output current. SparkFun COM-21255
zł37.90
24h
Available quantity: 1
Available
Small size driver module TB67S249FTG stepper motor powered with 10 ... 47V voltage and working current of 1.6A. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Polol 3096
zł65.41
24h
Available quantity: 1
Available
NPN to PNP signal converter. Equipped with overvoltage protection and overcurrent protection. DFRobot FIT0850