Ideal Diode Reverse Voltage Protector - reverse voltage and current protection module 4-60V, 25A
ID: 1196546
zł21.43
Tax included
zł17.42 tax excl.
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5389
Description
The Pololu Reverse Voltage Protector is a compact solution designed to protect connected loads from reverse voltage polarity of up to -60 V. By utilizing an ideal diode controller LM74700-Q1 and a MOSFET transistor, the device operates within a voltage range of 4 V (3.2 V after startup) to 60 V. When the voltage is correctly connected, the module allows free current flow. However, in the case of incorrect polarity, it blocks the voltage and protects the circuit from damage.
The device features an extremely low power path impedance of approximately 1.5 mΩ, enabling continuous current flow of up to 25 A and peak currents of up to 50 A for several seconds. The protection mechanism operates in a bidirectional manner, meaning the module not only blocks reverse input voltage but also prevents current backflow from the load to the power source.
The module includes large mounting holes that allow the connection of 14 AWG wires or the use of 5 mm pitch screw terminals. Additionally, smaller holes with a 2.54 mm pitch enable the soldering of standard pin headers. The bottom of the board also features pads for optional transient voltage suppression (TVS) protection, enhancing system resistance against sudden voltage spikes.
Features
- Input voltage: 4 V to 60 V (3.2 V after startup)
- Reverse polarity protection up to -60 V
- Current handling: up to 25 A continuous, up to 50 A peak
- Power path impedance: approximately 1.5 mΩ
- Prevents current backflow from the load to the power source
- Supports 14 AWG wires and 5 mm pitch screw terminals
- Soldering points for optional TVS protection
- Dimensions: 12.7 x 15.2 mm
1196546
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5388
zł15.69
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5383
zł12.05
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 00 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5382
zł9.23
Delivery date unknown
No product available!
Other products in the same category (16)
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36V and efficiently reduces it to 5V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.5A and features reverse voltage protection. Pololu 2858
zł80.87
24h
Available quantity: 2
Available
The module is ideal for applications requiring precise control and signal processing, with the ability to be easily controlled via Ethernet. Numato Lab NLETHGC016-HT
zł384.02
3 weeks
No product available!
A module with a 3-channel ADC ADC ADS1015, which allows you to read voltages from -24 V to +24 V with a sampling frequency of up to 3.3 kHz and a resolution of 12 bits. Pimoroni PIM422
zł80.58
24h
Available quantity: 3
Available
DEV-11767, Graphics Controller, RoHS, 4Dsystems
zł451.51
24h
Available quantity: 1
Available
This small breakout board couples an Electret microphone (100Hz–10kHz) with a 60x mic preamplifier to amplify the sounds of voice, claps, door knocks or any sounds loud enough to be picked up by a microcontroller’s analog-to-digital converter. Each breakout comes fully assembled and works from 2.7V up to 5.5V. BOB-12758
zł43.63
3 weeks
No product available!
Step-Down RT8272 converter with adjustable output voltage in the range from 5 V to 12 V, input voltage from 5 to 24 V and a maximum output current of 3 A
zł9.10
4 weeks
No product available!
Relay module for the WeMos D1 Mini WiFi set
zł5.41
24h
Available quantity: 18
Available
Driver dedicated to servomechanisms equipped with a UART serial interface. It allows you to control up to 253 servos from the ST/SC series, which makes it an ideal solution for walking robots or manipulators projects. Waveshare Bus Servo Adapter (A)
zł19.77
24h
Available quantity: 7
Available
4-channel switch module with a maximum voltage of 16 V and a current of 2 A based on a MOSFET transistor. It is controlled by digital inputs. It is equipped with a screw connection and status LEDs. Adafruit 5757
zł63.03
4 weeks
No product available!
DC-DC Step-Up converter U3V40F9 with an output voltage of 9 V, an input voltage of 1.3 to 9 V and a maximum output current of 4 A. Pololu 4015
zł44.74
4 weeks
No product available!
DC-DC Step-Down converter module. It has an input voltage from 9 to 45 V, an output voltage of 9 V and a maximum output current of up to 2.9 A. Pololu 4895
zł82.43
4 weeks
No product available!
4-channel stereo audio mixer in a metal housing. It has one output, on which the summed signal from 4 inputs is available. It is powered with the voltage from 5 to 12 V.
zł100.71
4 weeks
No product available!
Universal USB2.0 adapter for JTAG, UART and GPIO based on the FTDI FT2232H chip. The adapter card converts signals from USB2.0 to standard serial or parallel interfaces of embedded systems such as JTAG, SPI, I²C and UART. Compatible with Xilinx tools. Trenz TE0790-03
zł321.17
4 weeks
No product available!
Pololu Simple Motor Controller 18v7 (Fully Assembled)
zł783.23
24h
Available quantity: 1
Available
The module with 4 relays, designed to work with the micro:bit. It allows you to control devices with operating parameters up to 120VAC/2A or 24VDC/2A. SB Components 14118
zł84.48
24h
Available quantity: 1
Available
Step-Down DC-DC converter module based on the D36V6F6 chip. Input voltage 6.2..50V, output voltage 6V (max. 600mA). Pololu 3793
zł27.83
4 weeks
No product available!
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5389