Ideal Diode Reverse Voltage Protector - reverse voltage and current protection module 4-60V, 10A

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and USB typ A output. Allows you to power devices with 5 V, 9 V, 12 V, 15 V and 20 V and test chargers by replacing the PD device

Pololu Simple High-Power Motor Controller 24v12 (Fully Assembled)

The Step-Up converter module converts the voltage in the range of 8.5-48V to 10-50V with a conversion efficiency of over 96%. It operates in a wide temperature range from -40°C to 85°C, offering a current of up to 10A.

LED and audio controller designed for lighting effects in LEGO® compatible models, dioramas and decorations. It offers six mono channels, one RGB channel, audio amplifier, sensor inputs and a Qw/ST connector – all without the need for soldering. It enables the creation of advanced animations, lighting effects and synchronized audio in a compact form factor. Pimoroni PIM718

DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5054

Two-channel driver for DC motors with an operating voltage from 7 to 45 V and a continuous current of up to 60 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDDS60

Step-Down converter with an output voltage of 5 V, input voltage from 9 to 36 V and a maximum current of 5 A. The board is equipped with a DC input connector and an output USB connector

The Step-Down converter module converts the input voltage of 5.3 - 26 V to a constant 3.3 V, with a maximum output current of 3 A, recommended up to 1.8 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm

The KAmod SPI Flash module with W25Q128 memory provides a functional storage expansion for projects requiring larger data retention, such as measurement logging, system configurations, or event logs. Its compact form factor and standard pin layout make it easy to use in both prototyping and production applications that utilize the SPI bus.

Module with a 16-channel PWM PCA9685 driver. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 108020102

High-quality digital-to-analog converter that allows for pure stereo audio playback without the need for I2C configuration or the MCLK pin. It supports I2S signals (BCLK, WSEL, DIN) and audio formats up to 32 bits and 384 kHz, providing an excellent signal-to-noise ratio (112 dB). Audio output is available via a 3.5 mm jack or on-board pads, and the module works best as a line output to amplifiers and audio systems. Adafruit 6250

Module with a stepper motor driver based on the DRV8825 system. allows the bipolar motor to be supplied with current up to 1.5 A per phase, without the use of a heat sink. The system can be supplied with voltage up to 45 V. Pololu 2987

The protection circuit for one Li-Ion cell with a voltage of 3.7 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 8 A

Easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH; works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers; uses the CH340G IC to quickly and easily convert serial signals to USB. DEV-14050

Advanced ESP32-based LED driver board, designed for full compatibility with WLED and xLights. With a wide range of power supply options, ready-made connectors and built-in protection, it is ideal for creating both simple and complex lighting installations, offering convenience and reliability for both amateurs and professionals. Adafruit 6100

Step-Up converter with an output voltage of 2 to 28 V, an input voltage of 2 to 24 V and a maximum current of 2 A