zł149.41 tax excl.
Camera module with a Sony Starvis IMX462 sensor compatible with Raspberry Pi minicomputers. It has a 2 MP matrix and a lens with a 141° viewing angle and supports the HDR function. ArduCAM B0444
Camera module with a Sony Starvis IMX462 sensor compatible with Raspberry Pi minicomputers. The sensor used has a 2 MP matrix and allows you to record video in a resolution of 1920x1080/46fps. It supports HDR (High Dynamic Range), which provides a wider range of brightness and richer colors. It is equipped with manual focus adjustment allowing it to be used in low light conditions, etc. It has support in the form of a native driver for Raspberry Pi and is fully supported by the libcamera and Picamera2 libraries. It communicates via the MIPI CSI-2 interface. The module is equipped with a lens with a 141° viewing angle and an M12 mount. It is perfect for applications such as macro photography and astrophotography.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
RGB LED strip consisting of 120 colorful WS2812 LEDs. The diodes are controlled by one signal line. The strip can be arbitrarily bent or cut. Equipped with adhesive tape for easy assembly. DFRobot FIT0612
Doppler radar module with 24GHz BGT24LTR11 transceiver. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020021
No product available!
Module with 1.9" black and white e-Paper display. Built from 91 segments, communicates via the I2C interface. Waveshare 1.9inch Segment e-Paper Module
Pololu 12V Step-Up Voltage Regulator U3V50F12
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
Female terminal block, angled, 2-pin. Pitch 5.0mm. Height 15mm. 2EDGK-5.0-2P. Set of 5 pieces
Test socket dedicated to chips in QFN8, MLP8 and MLF8 chassis. Allows you to plug in the chip multiple times without damaging the leads. Waveshare QFN-8(24)B-0.5-02
No product available!
DC-AC converter, also referred to as an inverter. Converts a constant voltage (DC) of 12 V to an alternating voltage (AC) of 220 V
No product available!
An integrated module combining WiFi, Bluetooth 4.0 and FM radio. It has derived SDIO, UART and PCM interfaces. Ampak AP6335
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
Advanced ESP32-based communication module with Wi-Fi and Bluetooth 4.2 support, equipped with LoRa SX1276 chip for long-range transmission in the 868 MHz band. Integrated NEO-6M GPS module and 0.96" OLED display enable real-time location and data viewing, and built-in 18650 cell cage provides mobility and energy independence. T-Beam V1.2 is ideal for projects based on mesh networks, providing reliable connectivity in field and IoT applications. LILYGO TTGO Meshtastic T-Beam V1.2
No product available!
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 5 V and a maximum input of up to 2 A. Pololu 4941
Single-channel audio amplifier up to 100 W.
Camera module with a Sony Starvis IMX462 sensor compatible with Raspberry Pi minicomputers. It has a 2 MP matrix and a lens with a 141° viewing angle and supports the HDR function. ArduCAM B0444