![Para magnetycznych enkoderów dla silników z metalową przekładnią Pololu 12 CPR, 2,7-18V Para magnetycznych enkoderów dla silników z metalową przekładnią Pololu 12 CPR, 2,7-18V](https://kamami.pl/25780-large_default/magnetic-encoder-pair-kit-for-micro-metal-gearmotors-12-cpr-27-18v-hpcb-compatible.jpg)
![Para magnetycznych enkoderów dla silników z metalową przekładnią Pololu 12 CPR, 2,7-18V Para magnetycznych enkoderów dla silników z metalową przekładnią Pololu 12 CPR, 2,7-18V](https://kamami.pl/25780-large_default/magnetic-encoder-pair-kit-for-micro-metal-gearmotors-12-cpr-27-18v-hpcb-compatible.jpg)
zł33.20 tax excl.
The kit uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. Compatible with all of the dual-shaft micro metal gearmotors we carry, including the HPCB versions. Pololu 3081
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
This kit includes two dual-channel Hall Effect sensor boards and two 6-pole magnetic discs that can be used to add quadrature encoding to two micro metal gearmotors with extended back shafts (motors are not included with this kit). The encoder board senses the rotation of the magnetic disc and provides a resolution of 12 counts per revolution of the motor shaft when counting both edges of both channels. To compute the counts per revolution of the gearbox output shaft, multiply the gear ratio by 12.
This compact encoder solution fits within the 12 mm × 10 mm cross section of the motors on three of the four sides, and it only extends 0.6 mm past the edge of the fourth side (note: if you need it to be flush with that last side, you can carefully grind the board down a little and solder to the remaining half-holes). The assembly does not extend past the end of the extended motor shaft, which protrudes 5 mm beyond the plastic end cap on the back of the motor.
motors are NOT included with this kit
10:1 Micro Metal Gearmotor HP with Extended Motor Shaft
No product available!
30:1 Micro Metal Gearmotor HP with Extended Motor Shaft
30:1 Micro Metal Gearmotor with Extended Motor Shaft
No product available!
100:1 Micro Metal Gearmotor HP with Extended Motor Shaft
100:1 Micro Metal Gearmotor with Extended Motor Shaft
298:1 Micro Metal Gearmotor HP with Extended Motor Shaft
No product available!
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Pololu - 3498
AB two-phase pulse wave, measured by two infrared reflective sensor. These two sensor pulse waveform is close to a phase difference of 90 degrees, through the AB two-phase lead and lag of the waveform judged wheel forward rotation or the reverse. SEN0116
The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. This module is compatible with all of the Pololu dual-shaft mini plastic gearmotors. Pololu 1523
No product available!
This encoders are designed for DFRobot 3PA and AWD Rovers. It can give you the rotation degree of the wheels. Encoder uses non-contact method to convert the angular displacement signals. Best fit with Micro DC Geared Motor. SEN0038
Set of two magnetic encoders for use with micro motors. Regular mounting, set of 2. Pimoroni PIM604
A set of two magnetic encoders for use with Pololu DC Micro motors. The maximum resolution is 12 pulses per one revolution of the motor shaft. Powered from 2.7V to 18V. Pololu 4761
Add quadrature encoders to your 20D mm metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and Hall effect sensors to provide 20 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit.
Magnetic disk for use with magnetic encoders designed for Pololu 20D series motors. It allows you to generate 12 pulses per revolution. Pololu 3449
A set of two magnetic encoders for use with Pololu DC Micro motors. The maximum resolution is 12 pulses per one revolution of the motor shaft. Powered from 2.7V to 18V. Pololu 4760
Set of two magnetic encoders for use with micro motors. Side mounting, set of 2. Pimoroni PIM605
A set of magnetic encoders for the Romi Chassis chassis. With their help, we can measure the distance traveled by our mobile robot or control the engine speed. Pololu 3542
No product available!
This is the Wheel Encoder Kit from DAGU, a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. ROB-12629
No product available!
A set of two optical quadrature encoders for Polol micromotors with a two-sided extended shaft, compatible with the LP, MP, and HP series, 5V power supply. Polol 2590
No product available!
Pololu - 1524
The kit uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. Compatible with all of the dual-shaft micro metal gearmotors we carry, including the HPCB versions. Pololu 3081