- New
TinyPICO Nano ESP32 - development board with ESP32 PICO-D4 module
ID: 1201008
5902186337084
zł101.30
Tax included
zł82.36 tax excl.
This compact ESP32-based board offers full functionality in a package measuring just 13 x 27 mm. Equipped with a 3.3 V regulator (700 mA), 4 MB of PSRAM, a battery charger, and 27 GPIO pins, it delivers high performance with minimal power consumption. Separate 5 V and 3.3 V power paths and automatic disconnection of unused components increase energy efficiency. The TinyPICO NANO works with the Arduino IDE, MicroPython, and ESP-IDF.
Description
TinyPICO NANO is a miniature yet fully functional ESP32-based board, designed for direct integration into your own PCB. Despite its compact size (13 × 27 mm), TinyPICO NANO makes no compromises in terms of performance or functionality. Equipped with a 700 mA 3.3 V regulator, a built-in battery management circuit, 4 MB of additional PSRAM, and 27 GPIO pins, the module offers the full capabilities of a classic ESP32 in an ultra-compact form.
TinyPICO NANO has been optimized for low-power operation – in deep sleep mode it consumes less than 20 µA (typically 18 µA). This makes it perfect for battery-powered applications and IoT devices where energy efficiency is critical. The power system is divided into two independent rails: 5 V and 3.3 V. Components unnecessary in battery mode are automatically disconnected when 5 V power is not present, further reducing energy consumption. Even the power LED is disabled in this mode.
All available pins are exposed, including 6 ADC1 input pins, as well as EN (to disable the 3.3 V LDO) and STAT (battery charging status indicator) pins. TinyPICO NANO is compatible with popular development environments such as Arduino IDE, MicroPython, and ESP-IDF, enabling fast prototyping and project development. The module is supplied without a USB connector – users can add their own on a carrier board by wiring VBUS (5V), GND, D+, and D- to the corresponding module pins. TinyPICO NANO is designed for reflow or hot-air soldering using SAC305 solder paste. Combining low power consumption, rich functionality, and minimal size, TinyPICO NANO is the perfect solution for designers creating intelligent, compact, and efficient electronic systems.
Features
- ESP32 PICO-D4 module
- Supply voltage: 5 V / 3.3 V
- Regulator: 3.3 V, 700 mA
- PSRAM: 4 MB
- GPIO count: 27
- Deep sleep current: 18 µA (typically below 20 µA)
- Separate 5 V and 3.3 V power rails
- Built-in battery charging circuit
- Special pins: EN (Enable), STAT (charging status)
- Software compatibility: Arduino IDE, MicroPython, ESP-IDF
- Dimensions: 13 × 27 mm
1201008
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The ESP32-PICO-D4 development board combines the high performance of a dual-core 240MHz processor with Wi-Fi and Bluetooth BLE 4.2 connectivity. Equipped with the CH9102F USB-UART chip, a 3.3V (700mA) regulator, 4MB of PSRAM, and an on-board LiPo battery management system, it delivers powerful functionality with minimal power consumption. Compatible with the Arduino IDE, MicroPython, CircuitPython, and ESP-IDF. TinyPICO V3 USB-C
zł106.63
24h
Available quantity: 1
Available
The ESP32-PICO-D4 development board combines the high performance of a dual-core 240MHz processor with Wi-Fi and Bluetooth BLE 4.2 connectivity. Equipped with the CH9102F USB-UART chip, a 3.3V (700mA) regulator, 4MB of PSRAM, and an on-board LiPo battery management system, it delivers powerful functionality with minimal power consumption. Compatible with the Arduino IDE, MicroPython, CircuitPython, and ESP-IDF. TinyPICO V3 USB-C
zł111.07
24h
Available quantity: 2
Available
Other products in the same category (16)
ESP32-S3 development board with a 4.2″ reflective RLCD display with a resolution of 300 x 400 px, supporting Wi-Fi and Bluetooth 5 LE, AI Voice Interaction features, and a temperature and humidity sensor, supplied without a 18650 battery. Waveshare ESP32-S3-RLCD-4.2-EN
zł118.40
6 weeks
No product available!
Integrated all-in-one HMI platform with a 10.1-inch 800 x 1280 touch display, based on the ESP32-P4, equipped with Wi-Fi 6, Bluetooth 5 LE, two microphones, and a speaker, intended for advanced smart home, industrial, and edge computing applications. ESP32-P4-WIFI6-Touch-LCD-10.1
zł422.82
6 weeks
No product available!
All-in-one HMI platform with an 8-inch 800 x 1280 touch display based on the ESP32-P4, equipped with Wi-Fi 6, Bluetooth 5 LE, two microphones, and a speaker, intended for advanced smart home, industrial, and edge computing applications. ESP32-P4-WIFI6-Touch-LCD-8
zł409.29
6 weeks
No product available!
Development board featuring the ESP32-C6 (32-bit RISC-V up to 160 MHz), equipped with a 1.14″ IPS color LCD (240 × 135 px), 2.4 GHz Wi-Fi 6, and Bluetooth 5 (LE). Includes 16 MB Flash, TF card slot, USB-A port, and GPIO, UART, and I2C headers. Designed for IoT projects, wireless applications, and programming education. Waveshare ESP32-C6-GEEK
zł52.39
6 weeks
No product available!
Development board with ESP32-C6FH4 microcontroller, 1.3" IPS LCD 240x240px 262K colors, SPI interface, WiFi6, BLE5 and IEEE 802.15.4 support, version with pre-soldered pin headers. Waveshare ESP32-C6-LCD-1.3-M
zł51.35
6 weeks
No product available!
Development board with ESP32-C6FH4 microcontroller, 1.3" IPS LCD 240x240px 262K colors, SPI interface, WiFi6, BLE5 and IEEE 802.15.4 support, version without pre-soldered pin headers. Waveshare ESP32-C6-LCD-1.3
zł47.42
6 weeks
No product available!
Portable development board based on the ESP32-S3, featuring a round 1.75" AMOLED capacitive touch display with a 466 × 466 px resolution, enclosed in a CNC-machined aluminum alloy case. Standard version – battery not included. Designed for HMI interfaces, IoT devices, multimedia and voice-enabled projects. Waveshare ESP32-S3-Touch-AMOLED-1.75C-EN
zł193.61
6 weeks
No product available!
Portable development board based on the ESP32-S3 microcontroller, featuring a 1.75-inch round capacitive AMOLED touch display with a 466 × 466 px resolution, enclosed in a CNC-machined aluminum alloy case. The board is equipped with a dual-microphone array, onboard speaker, and is supplied with a 3.7 V lithium battery, enabling fully standalone and mobile operation. Designed for HMI interfaces, portable smart devices, IoT projects, multimedia applications, and voice-enabled systems. Waveshare ESP32-S3-Touch-AMOLED-1.75C
zł196.05
6 weeks
No product available!
AI vision development board based on the ESP32-S3 microcontroller, equipped with a 2 MP camera, capacitive TFT touchscreen, audio interfaces, and WiFi and Bluetooth connectivity, designed for local image, audio, and touch-based AI recognition. Elecrow SAD00006D
zł109.10
24h
Available quantity: 2
Available
Compact development board based on ESP32-C5 with dual-band WiFi6 2.4GHz and 5GHz, Bluetooth 5 LE, and IEEE 802.15.4, designed for advanced low-power IoT applications. XIAO ESP32-C5
zł29.90
4 weeks
No product available!
Compact development board based on ESP32-C5 with dual-band WiFi6 2.4GHz and 5GHz, Bluetooth 5 LE, and IEEE 802.15.4, equipped with factory-soldered pin headers, designed for advanced low-power IoT projects. XIAO ESP32-C5 (Pre-Soldered)
zł39.11
24h
Available quantity: 37
Available
Development board with ESP32-S3, featuring a 4.3-inch IPS display 800 x 480 with 5-point capacitive touch, audio codec with dual microphones, and support for 2.4 GHz Wi-Fi and BLE 5. Designed for HMI systems, IoT projects, and voice interface applications. Version with plastic case. Waveshare ESP32-S3-Touch-LCD-4.3C-BOX
zł210.32
6 weeks
No product available!
Development board with ESP32-S3, featuring a 4.3-inch IPS display 800 x 480 with 5-point capacitive touch, audio codec with dual microphones, and support for 2.4 GHz Wi-Fi and BLE 5. Designed for HMI systems, IoT projects, and voice interface applications. Standard version without case. Waveshare ESP32-S3-Touch-LCD-4.3C
zł183.57
6 weeks
No product available!
Miniature development board based on ESP32-S3FH4R2 / ESP32-S3-PICO-1-N8R8 with 8 MB Flash and 8 MB PSRAM. Supports 2.4 GHz Wi-Fi and Bluetooth 5 LE. Version with USB Type-C adapter board and FPC cable included. Waveshare ESP32-S3-Tiny-N8R8-Kit
zł35.20
6 weeks
No product available!
Miniature development board based on ESP32-S3FH4R2 / ESP32-S3-PICO-1-N8R8 with 8 MB Flash and 8 MB PSRAM. Supports 2.4 GHz Wi-Fi and Bluetooth 5 LE. Standard version - without USB Type-C adapter board and FPC cable. Waveshare ESP32-S3-Tiny-N8R8
zł32.25
6 weeks
No product available!
Miniature development board with ESP32-S3 module featuring 8 MB Flash and 8 MB PSRAM. Supports 2.4 GHz Wi-Fi and Bluetooth 5 LE. Version with pre-soldered pin headers (WITH HEADER), ready for breadboard use. Waveshare ESP32-S3-Zero-N8R8-M
zł35.20
6 weeks
No product available!
This compact ESP32-based board offers full functionality in a package measuring just 13 x 27 mm. Equipped with a 3.3 V regulator (700 mA), 4 MB of PSRAM, a battery charger, and 27 GPIO pins, it delivers high performance with minimal power consumption. Separate 5 V and 3.3 V power paths and automatic disconnection of unused components increase energy efficiency. The TinyPICO NANO works with the Arduino IDE, MicroPython, and ESP-IDF.