zł84.11 tax excl.
WiFi HaLow IEEE 802.11ah module operating in the 902-928 MHz band, based on FGH100M-H, designed for Seeed Studio XIAO boards, with up to 1 km range and 3.0-3.6 V supply. Seeed Studio 109100041
WiFi HaLow module designed for integration with Seeed Studio XIAO boards, based on the FGH100M-H radio module. It supports the IEEE 802.11ah standard and operates in the 902-928 MHz frequency band, providing extended transmission range and improved signal penetration compared to conventional 2.4 GHz WiFi. The solution is intended for IoT systems requiring long-distance communication with low power consumption.
The maximum transmission range can reach up to 1 km under favorable conditions. The module operates in STA mode and supports OFDM, BPSK, QPSK, 16QAM and 64QAM modulation schemes. Integrated security mechanisms include AES, SHA-256, SHA-384, SHA-512 and WPA3. The compact 42 x 25 mm form factor allows direct connection to Seeed Studio XIAO boards in pre-soldered header versions.
Note!
The expansion board is not directly compatible with the XIAO nRF54L15 series due to the lack of Arduino support. The hardware interface remains fully compatible, and software adaptation can be performed on the user side. Official software support is currently under development.
Proper operation requires the use of a suitable WiFi HaLow antenna and an SMA to I-PEX antenna cable.
Data sheet
Manufacturer
Responsible person
Expansion module for Seeeduino XIAO. It is equipped with an OLED display, RTC, MiniSD slot, buzzer, buttons, servo connector and numerous interfaces. Seeed Studio 103030356
Expansion module for Seeeduino XIAO. It is equipped with Grove connectors and a lithium battery charging system. Seeed Studio 103020312
Acrylic housing designed for Seeeduino XIAO Expansion Board modules. Provides good protection against damage and has a dedicated space for the battery. Seeed Studio 110010024
Extension module with Li-Ion and LiPo charger dedicated to QT Py boards. It allows you to charge the batteries with a current of up to 200 mA. Adafruit 5397
RGB LED driver module designed for QT Py and Xiao boards. It uses a 3.3V/5V voltage level converter and allows to control 30 Neopixel LEDs. Adafruit 5645
No product available!
RGB 5x5 (25 LEDs) matrix LED display module designed for QT Py and Xiao boards. It uses SK6805 addressable LEDs and communicates via a single-wire interface. Adafruit 5646
Miniature module with button and RGB NeoPixel LED dedicated to QT Py and Xiao boards. Adafruit 5666
Miniature module with MicroSD card slot dedicated to QT Py and Xiao boards. Adafruit 5683
Module with a round, color LCD TFT display with a diagonal of 1.28" and a resolution of 240x240 pixels. Equipped with a touch panel. Communication is carried out via the SPI interface (display operation) and I2C (touch panel). Seeed Studio 104030087
Module with class D mono audio amplifier designed for QT Py and Xiao boards. It is based on the MAX98357 system and can work with a loudspeaker from 4 to 8 Ω with a power of up to 3 W. It communicates via the I2S interface. Adafruit 5770
Adapter with 18-pin FPC connector with 0.5 mm pitch designed for QT Py and Xiao boards. It has pin-outs on the edge connectors. Dedicated to Adafruit\'s EYESPI series displays. Adafruit 5772
Module designed for the XIAO development platform. It acts as an advanced human presence sensor, using FMCW technology to detect human targets in a specific space. The module offers a maximum detection distance of up to 5 meters and a wide detection angle of ±60°. Seeed Studio 101010001
RGB LED matrix dedicated to XIAO boards, which offers a total of 60 WS2812B LEDs in a 6 x 10 diode system. Thanks to its compact size, it is ideal for projects with limited space, such as wearable devices. Seeed Studio 104030107
A comprehensive beginner\'s kit that combines the XIAO board with a variety of Grove modules, allowing you to quickly create electronic projects. It is compatible with XIAO boards based on RP2040, SAMD21, nRF52840 or ESP32 and allows you to implement IoT projects, monitor weather conditions or detect motion, and also offers free educational courses. Seeed Studio 110010044
Development board based on the XMOS XU316 audio processor and the XIAO ESP32S3 module, featuring a dual digital microphone array for voice capture and processing. Enables integration with ESPHome and the Home Assistant platform and can be used to build custom voice assistant systems. Seeed Studio 110061601
No product available!
Compact snap-on mount, made using SLA 3D printing technology, designed for QT Py boards. It offers aesthetic, lightweight and durable protection without the need for screws or glue. Thanks to its universal design, it also fits the Xiao form factor and is suitable for both mobile and stationary projects. Adafruit 6183
WiFi HaLow IEEE 802.11ah module operating in the 902-928 MHz band, based on FGH100M-H, designed for Seeed Studio XIAO boards, with up to 1 km range and 3.0-3.6 V supply. Seeed Studio 109100041