New products
New products
Available
Available
Available
Available
Available
Available
Round Display - module with a round 1.28" 240x240 TFT LCD display and a touch panel for XIAO
ID: 1184891
5906623437962
zł124.29
Tax included
zł101.05 tax excl.
Module with a round, color LCD TFT display with a diagonal of 1.28" and a resolution of 240x240 pixels. Equipped with a touch panel. Communication is carried out via the SPI interface (display operation) and I2C (touch panel). Seeed Studio 104030087
Description
Module with a round, color TFT LCD display and a touch panel designed for Seeeduino XIAO. It has a diagonal of 1.28" and a resolution of 240x240 pixels. It is equipped with a GC9A01 controller to operate the display (communication is carried out via the SPI interface) and a touch panel controller that communicates via the I2C bus. It is compatible with 3.3 V and 5 V systems It has a built-in RTC clock, battery charger and micro SD card slot.The small size of the board makes it ideal for wearable projects with numerous functions from displaying sensor data to creating interactive interfaces.Full documentation is available on the product page.
Features
- Diagonal: 1.28"
- Display type: LCD TFT
- Display controller: GC9A01
- Touchpad
- Resolution: 240x240 pixels
- Communication interface: SPI (display), I2C (touch panel)
- Color: 65K RGB
- Operating voltage: 3.3 or 5 V
- Dimensions (diameter): 43 mm
1184891
Data sheet
- Screen type
- TFT
- Diagonal (inch)
- 1,28
- Resolution
- 240 x 240 px
- Interface
- SPI/I2C
- Touch
- Yes
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A small development kit with a SAMD21 ARM Cortex M0 + microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010328
zł28.34 24hAvailable quantity: 108 AvailableDevelopment kit with ATSAMD21G18A microcontroller. It has 14 GPIO connectors, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010388
zł37.99 24hAvailable quantity: 11 AvailableThe board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428
Regular pricezł22.89zł21.43 24hAvailable quantity: 11 AvailableDevelopment kit with nRF52840 microcontroller with ARM Cortex M4F core and Bluetooth (BLE) 5.0 communication. Seeed Studio 102010448
zł57.92 24hAvailable quantity: 19 AvailableEspressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991054
zł25.60 Delivery date unknown No product available!
Other products in the same category (14)
Miniature module with button and RGB NeoPixel LED dedicated to QT Py and Xiao boards. Adafruit 5666
zł19.83 24hAvailable quantity: 2 AvailableExpansion module for Seeeduino XIAO. It is equipped with an OLED display, RTC, MiniSD slot, buzzer, buttons, servo connector and numerous interfaces. Seeed Studio 103030356
zł74.98 24hAvailable quantity: 4 AvailableRGB 5x5 (25 LEDs) matrix LED display module designed for QT Py and Xiao boards. It uses SK6805 addressable LEDs and communicates via a single-wire interface. Adafruit 5646
zł58.66 24hAvailable quantity: 1 AvailableMiniature module with MicroSD card slot dedicated to QT Py and Xiao boards. Adafruit 5683
zł15.57 24hAvailable quantity: 5 AvailableExtension module with Li-Ion and LiPo charger dedicated to QT Py boards. It allows you to charge the batteries with a current of up to 200 mA. Adafruit 5397
zł27.72 24hAvailable quantity: 3 AvailableA set with a Doppler radar module and an XIAO ESP32C3 board designed for precise detection of human presence. It allows you to connect additional Grove sensors (analog or with an I2C interface) and expand the functionality. Seeed Studio 110061541
zł179.65 24hAvailable quantity: 2 AvailableAn expansion board equipped with a 24-pin FPC connector, designed for the SeeedStudio XIAO series boards. Enables smooth control of the ePaper display. Seeed Studio 105990172
zł24.53 24hAvailable quantity: 6 AvailableExpansion module for Seeeduino XIAO. It is equipped with Grove connectors and a lithium battery charging system. Seeed Studio 103020312
zł22.24 24hAvailable quantity: 8 AvailableRGB LED driver module designed for QT Py and Xiao boards. It uses a 3.3V/5V voltage level converter and allows to control 30 Neopixel LEDs. Adafruit 5645
zł24.51 24hAvailable quantity: 8 AvailableAcrylic housing designed for Seeeduino XIAO Expansion Board modules. Provides good protection against damage and has a dedicated space for the battery. Seeed Studio 110010024
zł16.10 24hAvailable quantity: 3 AvailableRGB LED matrix dedicated to XIAO boards, which offers a total of 60 WS2812B LEDs in a 6 x 10 diode system. Thanks to its compact size, it is ideal for projects with limited space, such as wearable devices. Seeed Studio 104030107
zł32.32 24hAvailable quantity: 7 AvailableAdapter with 18-pin FPC connector with 0.5 mm pitch designed for QT Py and Xiao boards. It has pin-outs on the edge connectors. Dedicated to Adafruit\'s EYESPI series displays. Adafruit 5772
zł23.16 24hAvailable quantity: 3 AvailableModule with class D mono audio amplifier designed for QT Py and Xiao boards. It is based on the MAX98357 system and can work with a loudspeaker from 4 to 8 Ω with a power of up to 3 W. It communicates via the I2S interface. Adafruit 5770
zł27.04 24hAvailable quantity: 2 AvailableModule designed for the XIAO development platform. It acts as an advanced human presence sensor, using FMCW technology to detect human targets in a specific space. The module offers a maximum detection distance of up to 5 meters and a wide detection angle of ±60°. Seeed Studio 101010001
zł29.41 24hAvailable quantity: 5 Available
Module with a round, color LCD TFT display with a diagonal of 1.28" and a resolution of 240x240 pixels. Equipped with a touch panel. Communication is carried out via the SPI interface (display operation) and I2C (touch panel). Seeed Studio 104030087