Universal E-Paper HAT for Pico - universal module for e-Paper displays for Raspberry Pi Pico
ID: 1186362
zł47.88
Tax included
zł38.93 tax excl.
Universal module dedicated to e-Paper displays. It is equipped with connectors compatible with the Raspberry Pi Pico. It allows you to connect a display through one of the two FPC sockets. SB Components 26241
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Universal module dedicated to e-Paper displays. It is equipped with connectors compatible with the Raspberry Pi Pico. It allows you to connect a display through one of the two FPC sockets. Supports displays with resolutions of 800x480 pixels (7.5"), 648x480 pixels (5.83"), 400x300 pixels (4.2") and 296x128 pixels (2.9"). There are four buttons on the board at the user's disposal. The board can also be connected to a battery with a voltage of up to 7 V. The module is a universal adapter for e-Paper displays, which are characterized by high contrast of the displayed image and consume electricity only when the displayed content changes. Full documentation and usage examples are available on the product page.
Features
- Compatible with Raspberry Pi Pico, including Raspberry Pi Pico W
- Support for displays with resolutions of 800x480 pixels (7.5"), 648x480 pixels (5.83"), 400x300 pixels (4.2") and 296x128 pixels (2.9")
- Two FPC connector (top and bottom)
- 4 user buttons
- Battery connector
- LiPo charging circuit
- Supply voltage: 5 V (USB connector)
- IO logic voltage: 3.3V
1186362
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł20.90
24h
Available quantity: 137
Available
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
zł29.90
24h
Available quantity: 29
Available
Other products in the same category (16)
Module with OLED display, 2.23" diagonal and 128x32 px resolution. Communication via SPI or I2C interface. Waveshare Pico-OLED-2.23
zł65.67
24h
Available quantity: 3
Available
WiFi module with ESP8266 and 1.14" display, designed to work with Raspberry Pi Pico. It communicates via UART interface using AT commands. SB Components 21888
zł75.50
24h
Available quantity: 3
Available
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Pimoroni PIM556
zł49.32
24h
Available quantity: 4
Available
Module with black and white e-Paper display, 3.7" diagonal and 480x280 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-3.7
zł130.66
24h
Available quantity: 2
Available
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499
zł15.29
24h
Available quantity: 3
Available
Module with e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.13
zł69.90
24h
Available quantity: 4
Available
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22656
zł107.85
24h
Available quantity: 2
Available
Monochrome VGA camera module with HM0360 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0319
zł112.57
24h
Available quantity: 2
Available
Module with 4-digit 8-segment LED display. Communication via the SPI interface. Waveshare Pico-8SEG-LED
zł14.65
24h
Available quantity: 14
Available
Module with an RFID reader designed to work with the Raspberry Pi Pico. Equipped with an OLED display and a buzzer. SB Components 21192
zł144.29
24h
Available quantity: 2
Available
Module with a differential pressure sensor based on the MPXV5010DP system. It uses a 22-bit ADC and allows the measurement of the pressure difference between two inlets in the range of up to 10 kPa. Comes with a soldered Raspberry Pi Pico W board. SB Components 26173
zł527.35
24h
Available quantity: 2
Available
Extension module designed for Raspberry Pi Pico boards. It allows you to add communication based on the CAN bus to the project, commonly used in projects related to robotics and the automotive industry. Adafruit 5728
zł71.76
24h
Available quantity: 2
Available
L76B based GNSS module that can work with GPS, BDS and QZSS systems. Communication via the UART interface. Waveshare Pico-GPS-L76B
zł69.56
24h
Available quantity: 10
Available
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (one male and one female) of 2x20 pin strips. SB Components 20812
zł45.57
24h
Available quantity: 2
Available
Base board designed for Raspberry Pi Pico. Equipped with numerous connectors, buzzer, buttons and LEDs. Cytron MAKER-PI-PICO-MINI-NB
zł50.95
24h
Available quantity: 7
Available
Module with a black and white e-Paper display with a diagonal of 2.66" and a resolution of 296x152 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.66
zł76.09
24h
Available quantity: 1
Available
Universal module dedicated to e-Paper displays. It is equipped with connectors compatible with the Raspberry Pi Pico. It allows you to connect a display through one of the two FPC sockets. SB Components 26241