Pico-GPS-L76B - GNSS L76B module for Raspberry Pi Pico
ID: 586572
zł69.56
Tax included
zł56.55 tax excl.
L76B based GNSS module that can work with GPS, BDS and QZSS systems. Communication via the UART interface. Waveshare Pico-GPS-L76B
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
GNSS module based on L76B and designed to work with Raspberry Pi Pico. It can work with GPS, BDS and QZSS systems and provides high positioning accuracy with low power consumption. It communicates via the UART interface. On the board there is a socket for a battery supporting the voltage and 4 LEDs indicating the operation. The module is powered with the voltage of 5 V. Full documentation with examples is available on the product Wiki page.
Pinout
Features
- Frequency band: GPS L1 (1575.42Mhz), BD2 B1 (1561.098MHz)
- Channels: 33 channels trackers, 99 can. canvassing, 210 can. PRN
- C/A code
- SBAS support: WAAS, EGNOS, MSAS, GAGAN
- Positioning accuracy: <2.5m CEP
- Start time:
- Cold start: <15 sec
- Warm start: <5 sec
- Hot start: <1s
- Sensitivity:
- Acquisition: -148dBm
- Tracking: -163dBm
- Re-acquisition: -160dBm
- Altitude (max.): 18,000 m
- Speed (max): 515 m/s
- Acceleration (max): 4g
- UART communication interface
- Baud Rate 4800 to 115200bps (Default 9600bps)
- Update rate 1 Hz (default), 10 Hz (max.)
- NMEA 0183, PMTK protocols
- Supply voltage 5V
- Working current 13 mA
- Total current consumption <40mA @ 5V
- Working temperature -40 ℃ to 85 ℃
- Dimensions 52 x 21mm
Kit contains
- Pico-GPS-L76B
- Antenna GPS
586572
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł20.90
24h
Available quantity: 155
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander
zł39.82
24h
Available quantity: 7
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Waveshare Pico-Dual-Expander
zł30.00
24h
Available quantity: 1
Available
Other products in the same category (16)
WiFi module with ESP8266 designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-ESP8266
zł41.62
24h
Available quantity: 7
Available
The module with the UART-RS485 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3485 chip and enables data transmission between the UART interface and the RS485 device. Waveshare Pico-2CH-RS485
zł24.94
24h
Available quantity: 19
Available
Ethernet network module with W5100S chip dedicated to Raspberry Pi Pico. It communicates via the SPI interface and works with 3.3 V and 5 V systems. WIZnet-Ethernet-HAT
zł30.90
24h
Available quantity: 16
Available
Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. Waveshare Pico-SIM868-GSM/GPRS/GNSS
zł121.91
24h
Available quantity: 11
Available
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare Pico-LoRa-SX1262-433M
zł70.91
24h
Available quantity: 4
Available
Board with the NB-IoT SIM7020E module designed for the Raspberry Pi Pico. It communicates via the UART interface and AT commands. Waveshare Pico-SIM7020E-NB-IoT
zł84.88
4 weeks
No product available!
The expansion board with the LoRa E22-900T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and enables communication in the 868 MHz frequency band. SB Components 21628
zł264.19
24h
Available quantity: 2
Available
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M
zł72.82
24h
Available quantity: 2
Available
WiFi module with ESP8266 and 1.14" display, designed to work with Raspberry Pi Pico. It communicates via UART interface using AT commands. SB Components 21888
zł75.50
24h
Available quantity: 3
Available
The expansion board with the LoRa E22-400T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 21642
zł262.49
24h
Available quantity: 2
Available
The module with SIM7080G is designed for communication in the NB-IoT and Cat-M standard. It also enables the use of GNSS systems for positioning. Waveshare Pico-SIM7080G-Cat-M/NB-IoT (EN)
zł155.40
24h
Available quantity: 4
Available
Module with 4 relays and optoisolation. Equipped with RP2040 chip and ESP8266 WiFi module. Can communicate via RS485 bus. SB Components 24124
zł439.00
24h
Available quantity: 3
Available
Module with an RFID reader designed to work with the Raspberry Pi Pico. Equipped with an OLED display and a buzzer. SB Components 21192
zł144.29
24h
Available quantity: 2
Available
2-channel converter for Raspberry Pi Pico that provides easy communication between UART TTL serial interface and RJ45 Ethernet. Waveshare Pico-ETH-CH9121
zł53.90
24h
Available quantity: 12
Available
Bluetooth 5.1 module (BLE, SPP) designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-BLE
zł18.91
24h
Available quantity: 19
Available
The module with the UART-RS232 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3232EEN chip and enables data transmission between the UART interface and the RS232 device. Waveshare Pico-2CH-RS232
zł24.12
24h
Available quantity: 12
Available
L76B based GNSS module that can work with GPS, BDS and QZSS systems. Communication via the UART interface. Waveshare Pico-GPS-L76B