Pico Zero Board - prototype board for Raspberry Pi Pico
ID: 1178266
5906623413447
zł19.46
Tax included
zł15.82 tax excl.
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499
Description
Pico Zero Board is a board with prototype holes dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins, which greatly simplifies and streamlines the prototyping process. The board has no soldered connectors, so users can choose whether to solder the Raspberry Pi Pico directly to the Pico Zero or attach it with female 20-pin connectors.
The compact size makes the Pico Zero Board work well in various types of prototype devices - both small IoT devices and robots, as well as larger structures of mobile vehicles.
Features
- The area with the prototype holes 6x20 fields
- Hole pitch: 2.54 mm
- Labels with the names of the Raspberry Pi Pico pins
- Dimensions: 51 x 34 mm
Kit contains
- Pico Zero Board
- 2 x 20-pin female connector
1178266
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 354
Available
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
Regular pricezł29.90zł25.90
Delivery date unknown
No product available!
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander
zł36.56
24h
Available quantity: 4
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Waveshare Pico-Dual-Expander
zł29.04
24h
Available quantity: 5
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
zł23.90
24h
Available quantity: 274
Available
Other products in the same category (16)
Module of a 4-channel driver of DC motors with RP2040 microcontroller. It allows the connection of encoders and is equipped with a QW/ST connector. Pimoroni PIM636
zł146.07
24h
Available quantity: 4
Available
1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277
zł42.50
24h
Available quantity: 1
Available
Extension module designed for Raspberry Pi Pico boards. It allows you to add communication based on the CAN bus to the project, commonly used in projects related to robotics and the automotive industry. Adafruit 5728
zł69.15
24h
Available quantity: 5
Available
Monochrome VGA camera module with HM0360 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0319
zł101.30
24h
Available quantity: 2
Available
A set for building a digital LED clock designed to work with the Raspberry Pi Pico. It has a built-in precision RTC DS3231 chip, light sensor, buzzer and configuration buttons. Waveshare Pico-Clock-Green-EN
zł106.38
24h
Available quantity: 2
Available
The PMSA003 air quality sensor module to work with the Raspberry Pi Pico. It allows for a analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 21819
zł237.29
24h
Available quantity: 1
Available
Module with a differential pressure sensor based on the MPXV5010DP system. It uses a 22-bit ADC and allows the measurement of the pressure difference between two inlets in the range of up to 10 kPa. Comes with a soldered Raspberry Pi Pico W board. SB Components 26173
zł525.86
24h
Available quantity: 2
Available
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM638
zł233.07
24h
Available quantity: 2
Available
The servo control module is designed for the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. Waveshare Pico-Servo-Driver
zł41.35
24h
Available quantity: 5
Available
The module with screw connectors is dedicated to the Raspberry Pi Pico boards. It allows you to easily create prototypes, ensuring a stable connection of wires with the board. DFRobot DFR0924
zł95.19
24h
Available quantity: 2
Available
Board with prototype holes dedicated to Raspberry Pi Pico. It offers an 8x20 hole area with a pitch of 2.54 mm with marked pin labels and a reset button and STEMMA QT connector. Adafruit 5200
zł10.90
24h
Available quantity: 1
Available
A set for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM640
zł763.67
4 weeks
No product available!
Audio module with DAC and headphone amplifier designed to work with the Raspberry Pi Pico. It is based on the PCM5100A system and communicates via the I2S interface. Pimoroni PIM544
zł118.82
4 weeks
No product available!
4-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21178
zł75.77
24h
Available quantity: 2
Available
Prototype board designed to work with the Raspberry Pi Pico. It is equipped with 120 holes with a 2.54 mm pitch and allows you to build your own circuits and connections, while maintaining compact dimensions. Pimoroni PIM554
zł16.70
24h
Available quantity: 5
Available
Shield with two relays for Raspberry Pi Pico, provides control of devices up to 250 VAC/3 A or 30 VDC/3 A, equipped with LEDs indicating the status of the relays and opto-isolation, ideal for home automation and other DIY projects
zł29.90
24h
Available quantity: 137
Available
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499