1-channel module with relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. On the board there are LED indicating the switching status of the relay. The module will be used in applications in the field of home automation, industry and security systems. Full documentation with examples is available on the product wiki page.

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. SB Components 21314
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. SB Components 21352
Shield with two relays for Raspberry Pi Pico, provides control of devices up to 250 VAC/3 A or 30 VDC/3 A, equipped with LEDs indicating the status of the relays and opto-isolation, ideal for home automation and other DIY projects
Kit for controlling soil moisture of cultivated plants. Equipped with a Raspberry Pi Pico W-based controller and soil moisture sensors with wires. Pimoroni PIM637
No product available!
A set for building a digital LED clock designed to work with the Raspberry Pi Pico. It has a built-in precision RTC DS3231 chip, light sensor, buzzer and configuration buttons. Waveshare Pico-Clock-Green-EN
Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468
A module with a barcode and QR scanner designed to work with the Raspberry Pi Pico. It allows you to read one-dimensional and two-dimensional codes using the intelligent image recognition algorithm. SB Components 22441
No product available!
4-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21178
No product available!
Module with 4-digit 8-segment LED display. Communication via the SPI interface. Waveshare Pico-8SEG-LED
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Pimoroni PIM630
Prototype board designed to work with the Raspberry Pi Pico. It is equipped with 120 holes with a 2.54 mm pitch and allows you to build your own circuits and connections, while maintaining compact dimensions. Pimoroni PIM554
No product available!
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21284
A power supply module with a LiPo and Li-Ion battery charger dedicated to the Raspberry Pi Pico boards. It has a built-in button and over-discharge and overload protection. Pimoroni PIM557
No product available!
Universal board equipped with a metalized hole grid with a pitch of 2.54 mm, enabling mounting using goldpin strips or directly on the surface, with markings facilitating the identification of signals
Mini HDMI module for Raspberry Pi Pico. It allows you to send a video signal, e.g. to a monitor or TV. It is equipped with a STEMMA QT connector. Adafruit 5745
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes and two areas of 8x20 holes with a pitch of 2.54 mm with marked pin labels. SB Components 21505
No product available!
Programmable buzzer controller with six buttons, designed to work with Raspberry Pi Pico W and offering pinouts for many pins. It is ideal as a remote control for the Kitronik Autonomous Robotics (Buggy) platform, and thanks to its compact size and lack of a display, it is a cost-effective solution for controlling robots and vehicles in DIY projects. Kitronik 5353
Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Pimoroni PIM629
A set for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM640
No product available!
1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277