Electronic controller module for building an arcade game. It is compatible with the standard Windows game controller drivers for PC and Raspberry Pi. Connectors located on the board allow you to connect 12 momentary buttons, SANWA joystick, ZIPPY/HIPP joystick and function buttons. The controller supports TURBO and AUTO mode (LEDs flashing at a frequency of 12 Hz) and supports center point positioning and the dead zone function. It will be perfect for building your own arcade game and other devices that require many control elements.
Manufacturer
Responsible person
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Momentary button, concave with a diameter of 33 mm and a height of 66 mm. White color
Momentary button, concave with a diameter of 33 mm and a height of 66 mm. Purple color
Momentary button, concave with a diameter of 33 mm and a height of 66 mm. Orange color
No product available!
Momentary button with a diameter of 16 mm and a height of 25 mm. Black colour
Momentary button with a diameter of 16 mm and a height of 25 mm. Blue colour
Momentary button with a diameter of 12 mm and a height of 21 mm. Green colour
Momentary button with a diameter of 12 mm and a height of 21 mm. Red colour
Classic joystick (control stick) with built-in 4 microswitches, which can detect 8 directions of movement in the XY plane. It is equipped with an ergonomic handle in the form of a red ball, it will be perfect as a control element in typical arcade games
The connection cable (20 cm length) is terminated with a JST PH 2.0 2-pin plug and a flat (female) connector with a width of 4.8 mm
The connection cable (20 cm length) is terminated with a JST PH 2.0 2-pin plug and a flat (female) connector with a width of 2.8 mm
A magnetic stirrer that uses a rotating magnetic field to very quickly spin an element immersed in a liquid, which leads to its mixing. It will be used in laboratories. DFRobot FIT0537
Virtual keyboard module in the form of a small flash drive. It allows you to simulate the keyboard after uploading the appropriate software and pressing a combination of buttons on the computer.
Module with a cryptographic coprocessor based on the ATECC508A system. It allows you to add strong authentication security to an IoT node or embedded system. I2C communication. SparkFun DEV-15573
Electronic controller module for building an arcade game. Connectors placed on the board allow you to connect 12 momentary buttons, SANWA joystick, ZIPPY/HIPP joystick and function buttons
No product available!
Wireless controller with built-in Bluetooth module and USB type C output. SparkFun WIG-17265
No product available!
Wireless controller with built-in Bluetooth module and USB type C output. SparkFun WIG-17266
No product available!
Portable game console based on Raspberry Pi CM3+ Lite, equipped with LCD IPS 2.8" display, battery and speaker. Waveshare GPM2803P0
No product available!
A set for building a simple electronic watch worn on a wrist. It consists of an electronic board, a housing and a strap. SparkFun KIT-11734
A small self-assembly module that is used to learn numbers in binary code. It allows you to get acquainted with the bit representation of numbers by having fun. SparkFun KIT-12037
Programmable watch with ESP32. Equipped with a touch screen display, power management, RTC clock, vibration motor, loudspeaker and Lithium battery. LiliGo T-WATCH-2020
Adapter dedicated to the Nintendo Wii Nunchuck. It allows you to connect the controller to the development board via the I2C interface. Adafruit 4836
Kit to build an analog wooden watch with hands that move in the opposite direction to standard watches. Seeed Studio 110060052
A ruler with marked solder pads for the most commonly used housings of electronic components. Equipped with a template for the width of paths and holes in accordance with the AWG conductor cross-sections. It facilitates the design of electronics. DFRobot DWG0014-M
Sticker with described leads of ATMEGA328 microcontroller. SparkFun SWG-19631
2.4 GHz radio remote control enables precise and convenient lighting control with the ability to adjust the PWM frequency and connect to multiple dimmers
LILYGO TTGO T-Watch-2020 is a programmable smart watch with a 1.54 inch TFT touchscreen display, equipped with Wi-Fi, Bluetooth and an accelerometer, perfect for IoT and DIY projects. With open software and GPIO connectors, it offers full control over the functionality, and a 350 mAh battery ensures long work.
No product available!
Electronic controller module for building an arcade game. Connectors placed on the board allow you to connect 12 momentary buttons, SANWA joystick, ZIPPY/HIPP joystick and function buttons