zł961.45 tax excl.
Industrial 4G LTE Cat 4 cellular router for IoT, automation and monitoring systems; download speeds up to 150 Mbps and upload speeds up to 50 Mbps; Dual SIM; WiFi 4; 1 WAN and 3 LAN 10/100 Mbps ports; IEEE 802.3af/at PoE+; PoE IN on LAN1; PoE OUT on LAN2, LAN3 and WAN; up to 30 W per port and 90 W total PoE power budget; digital input and output; Modbus TCP, DNP3, DLMS/COSEM, OPC UA, BACnet/IP and MQTT; VPN; RutOS; Teltonika RMS; operating temperature from -40°C to 75°C; version with power supply. Teltonika RUT951 PoE+
Industrial cellular router designed to provide LTE, Ethernet and WiFi connectivity in IoT systems, automation, monitoring and distributed network installations. Teltonika RUT951 PoE+ supports 4G LTE Cat 4 with download speeds up to 150 Mbps and upload speeds up to 50 Mbps, as well as 3G and 2G networks. Two Mini SIM slots enable automatic SIM switching in cases such as weak signal, network loss, roaming, data connection failure or exceeded data limits. The router provides WiFi 4 802.11b/g/n with support for up to 100 simultaneous connections, one WAN port and three 10/100 Mbps LAN ports, automatic WAN Failover and load balancing.
IEEE 802.3af/at compliant PoE and PoE+ support allows the router to be powered through the LAN1 port and to supply power to network devices through LAN2, LAN3 and WAN. PoE outputs provide up to 30 W per port and a total power budget of up to 90 W, allowing devices such as IP cameras, access points and other compatible network equipment to be powered without separate power cables. RutOS based on OpenWrt provides routing, firewall, VLAN, VPN and support for Modbus TCP, DNP3, DLMS/COSEM, OPC UA, BACnet/IP and MQTT, while Teltonika RMS enables remote device management and monitoring. The aluminium enclosure, operating temperature range from -40°C to 75°C and IP30 protection rating support use in industrial installations, surveillance systems, telemetry and IoT infrastructure. Supplied with a power supply.
Data sheet
Compact mounting kit designed for installing compatible Teltonika Networks devices on a standard 35 mm DIN rail. The holder is made of PP FH44 material, while its compact dimensions of 70 x 25 x 14.5 mm facilitate installation of routers, modems, gateways and switches in control cabinets and industrial systems. Teltonika PR5MEC11
Metal mounting kit designed for installing compatible Teltonika Networks devices on a standard 35 mm DIN rail. The holder is made of low-carbon steel, while its dimensions of 65.2 x 44.2 x 1.5 mm allow routers, modems, gateways and switches to be installed in control cabinets, distribution boards and industrial installations. Teltonika PR5MEC00
Cable designed for powering and using input/output lines in compatible Teltonika Networks devices. One end features a 4-pin connector with 3 mm pitch, while the other is equipped with a 4-way screw terminal for solderless connections. The cable length is 2 m. Teltonika PR2FK20M
Roof-mount LTE MIMO antenna designed for use with compatible Teltonika Networks routers and devices. It supports frequency ranges of 698-960 MHz and 1710-2690 MHz, while two 3 m RG174 cables are terminated with SMA Male connectors. The housing has an IP65 ingress protection rating, excluding the cable outlet, and is UV resistant. Teltonika PR1KCL25
WiFi rod antenna designed for routers, access points and networking devices operating in the 2.4GHz band. Supports frequencies of 2400-2483MHz, providing 5dBi antenna gain, vertical polarization and 50Ω impedance. Equipped with an RP-SMA male connector and a hinged design allowing 90° positioning. Overall length of 195mm and IP33 protection rating. Teltonika PR1URF51
r cellular routers and modems. Supports frequency ranges of 698-960MHz and 1710-2690MHz, providing 4dBi antenna gain, vertical polarization and 50Ω impedance. Equipped with an SMA male connector and a hinged design allowing adjustable positioning. The antenna measures 197mm in length and features an IP33 protection rating. Teltonika PR1US440
Adhesive LTE antenna designed for use with cellular routers and modems. Supports frequency ranges of 824-960MHz and 1710-2170MHz, providing 2dBi antenna gain and 50Ω impedance. Equipped with a 3m RG174 cable terminated with an SMA male connector. IP50 protection rating and adhesive mounting. Teltonika PR1AS420
Compact LTE rod antenna with a straight SMA male connector, designed for cellular routers and modems. Operates in the 700-2700MHz frequency range, providing 5dBi gain, vertical polarization and 50Ω impedance. The antenna measures 54mm in length. Teltonika PR1CS450
5-in-1 roof antenna combining two LTE MIMO antennas, two WiFi MIMO antennas and a GNSS antenna. Supports LTE frequency bands of 698–960MHz and 1710–2690MHz, WiFi 2.4GHz and 5GHz bands, and GNSS frequencies of 1575.42–1610MHz. Equipped with five 3m cables with SMA and RP-SMA connectors. IP65-rated housing with screw mounting. Teltonika PR1KCO28
Industrial edge router for IoT systems, automation, energy applications and infrastructure requiring high connection availability; 2 independent 4G LTE Cat 4 modems with up to 150 Mbps download and 50 Mbps upload each; 3G up to 21/5.76 Mbps; 2G; 2 x Mini SIM and 2 x eSIM; independent SIM/eSIM switching for each modem; Failover and Load Balancing; dual-band WiFi 6 with MU-MIMO up to 2402 Mbps at 5 GHz and 576 Mbps at 2.4 GHz; up to 500 WiFi clients; 1 WAN port and 4 Gigabit Ethernet LAN ports; Docker; dual-core MediaTek 1.3 GHz processor; 1 GB DDR4 RAM; 8 GB eMMC; USB 2.0; digital input and output; Modbus TCP, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; passive PoE 9-50 VDC; RutOS; Teltonika RMS; operating temperature from -40°C to 75°C. Teltonika RUTC42
Industrial 5G router for IoT systems, automation, edge computing and infrastructure requiring high-speed data transmission; 5G Sub-6 GHz SA/NSA up to 3.4 Gbps download and 900 Mbps upload; 4G LTE Cat 19/18 up to 1.6 Gbps / 200 Mbps; 3G; Dual SIM and eSIM; dual-band WiFi 6 with MU-MIMO up to 2402 Mbps at 5 GHz and 576 Mbps at 2.4 GHz; up to 512 WiFi clients; 1 WAN port and 4 Gigabit Ethernet LAN ports; Docker; dual-core 1.3 GHz ARM Cortex-A53 processor; 1 GB DDR4 RAM; 8 GB eMMC; GNSS; USB 2.0; digital input and output; TPM 2.0; Modbus TCP/USB, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; passive PoE 9-50 VDC; RutOS; Teltonika RMS; operating temperature from -40°C to 75°C. Teltonika RUTC50
Industrial global 5G edge router for IoT systems, automation and distributed industrial networks; Telit 5G Sub-6 GHz SA/NSA modem with up to 3.4 Gbps download and 900 Mbps upload; 4G LTE Cat 19/18 up to 1.6 Gbps / 211 Mbps; 3G; Dual SIM and eSIM; automatic Failover and Load Balancing; dual-band WiFi 6 with MU-MIMO up to 2402 Mbps at 5 GHz and 576 Mbps at 2.4 GHz; up to 512 WiFi clients; 1 WAN port and 4 Gigabit Ethernet LAN ports; Docker; dual-core 1.3 GHz ARM Cortex-A53 processor; 1 GB DDR4 RAM; 8 GB eMMC; GNSS; USB 2.0; digital input and output; TPM 2.0; Modbus TCP/USB, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; passive PoE 9-50 VDC; RutOS; Teltonika RMS; operating temperature from -40°C to 75°C. Teltonika RUTC54
Industrial cellular router for IoT, M2M, automation and mobile installations; 4G LTE Cat 6 up to 300 Mbps download and 50 Mbps upload; 3G up to 42/5.76 Mbps; Dual SIM with automatic switching; Carrier Aggregation; 1 WAN port and 3 Gigabit Ethernet LAN ports; support for up to 128 port- and tag-based VLANs; GNSS with GPS, GLONASS, BeiDou, Galileo and QZSS; USB 2.0; digital input and output; Modbus TCP/USB, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; VPN; passive PoE 9-50 VDC; RutOS; Teltonika RMS; operating temperature from -40°C to 75°C. Teltonika RUTM09
The industrial cellular router provides 4G LTE Cat 6 connectivity, four Gigabit Ethernet ports, and dual-band Wi-Fi 5. Dual SIM support, GNSS, Wi-Fi Mesh, Fast Roaming, and failover functions support deployment in industrial and IoT networks requiring redundant connectivity. Teltonika RUTM11
The industrial cellular router provides 4G LTE Cat 6 connectivity, five Gigabit Ethernet ports, and dual-band Wi-Fi 5. Integrated eSIM support, Wi-Fi Mesh, Fast Roaming, and extensive network interfaces support deployment in IoT, transport, robotics, roadside infrastructure, and other distributed industrial systems. Teltonika RUTM16
The industrial cellular router provides global 5G connectivity, Wi-Fi 5, and wired Ethernet communication. Dual SIM, integrated eSIM, automatic failover, and PoE support enable deployment in compact IoT and IIoT installations requiring redundant network access. Teltonika RUTM20
No product available!
The industrial cellular router provides 5G SA/NSA connectivity with backward compatibility for 4G LTE Cat 19 and 3G networks. Dual SIM, eSIM, two Gigabit Ethernet ports, dual-band Wi-Fi, and automatic failover support high-speed and redundant connectivity in IoT and M2M installations. Teltonika RUTM30
The industrial cellular router provides 5G SA/NSA connectivity with backward compatibility for 4G LTE Cat 19/18 networks. Dual SIM support, five Gigabit Ethernet ports, Wi-Fi, GPS, and automatic failover enable deployment in industrial networks requiring high-speed data transmission and connection redundancy. Teltonika RUTM50
No product available!
The industrial cellular router uses two 5G modems and supports both SA and NSA architectures. Dual SIM, eSIM, Multi-WAN, load balancing, five Gigabit Ethernet ports, and Wi-Fi 5 support networks requiring high-speed data transmission, redundancy, and multiple independent WAN connections. Teltonika RUTM52
The industrial cellular router provides 5G SA/NSA connectivity with LTE Cat 19 support. Dual SIM, five Gigabit Ethernet ports, dual-band Wi-Fi, GNSS, and USB support integration with industrial, IoT, and redundant network installations. Teltonika RUTM54
The industrial cellular router provides 5G, 4G LTE, Wi-Fi 5, and Gigabit Ethernet connectivity. RS232 and RS485 interfaces, Dual SIM, eSIM, and automatic failover support integration with industrial automation systems and equipment using serial communication. Teltonika RUTM55
The industrial cellular router integrates two independent cellular modems: one 5G modem and one 4G LTE Cat 4 modem. Dual SIM, eSIM, load balancing, Wi-Fi 5, and five Gigabit Ethernet ports support redundant network architectures in IoT and industrial automation systems. Teltonika RUTM56
No product available!
The industrial cellular router provides 5G connectivity in both SA and NSA architectures with LTE Cat 19 DL / Cat 18 UL support. Dual SIM, five Gigabit Ethernet ports, GNSS, USB, and industrial communication protocols support deployment in industrial, transport, and IoT systems requiring high-speed and redundant network access. Teltonika RUTM59
No product available!
The industrial wired router provides four Gigabit Ethernet ports together with routing, VLAN, VPN, and network management functions. A quad-core CPU, 256 MB RAM, support for up to 128 VLANs, and RutOS enable deployment in industrial Ethernet networks and IoT infrastructure. Teltonika RUTX08
The industrial cellular router provides 4G LTE Cat 6 connectivity, four Gigabit Ethernet ports, and Dual SIM support. Failover functions, GNSS, USB, and industrial communication protocols support deployment in IoT, automation, and network installations requiring redundant cellular connectivity. Teltonika RUTX09
Industrial 4G LTE Cat 4 cellular router for IoT, automation and monitoring systems; download speeds up to 150 Mbps and upload speeds up to 50 Mbps; Dual SIM; WiFi 4; 1 WAN and 3 LAN 10/100 Mbps ports; IEEE 802.3af/at PoE+; PoE IN on LAN1; PoE OUT on LAN2, LAN3 and WAN; up to 30 W per port and 90 W total PoE power budget; digital input and output; Modbus TCP, DNP3, DLMS/COSEM, OPC UA, BACnet/IP and MQTT; VPN; RutOS; Teltonika RMS; operating temperature from -40°C to 75°C; version with power supply. Teltonika RUT951 PoE+