A set of 10 cables, 50 cm long, for digital sensors compatible with the Gravity standard. The cable is terminated on one side with a JST PH2.0-3P connector and on the other with a goldpin 2.54 mm connector. It allows to connect the Gravity modules to the control board, eg Ardunio.
Data sheet
Manufacturer
Responsible person
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
Set of 10 cables, 30 cm long, for analog sensors compatible with the Gravity standard. DFRobot FIT0031
Set of 10 cables, 30 cm long, for digital sensors compatible with the Gravity standard. DFRobot FIT0011
2-wire cable with JST plug, cable ends are tinned, length 15 cm, 2mm pitch. The cable has an additional 2-pole angled cable-to-board socket
No product available!
4-core cable, 20 cm long, terminated on both sides with a Grove plug. Compatible with the interface used in Seeed Studio and M5Stack modules. Seeed Studio 110990027
3-pin cable with a length of 30 cm and 28 AWG. A one-sided JST ZH 3-pin female connector that is compatible with the 3-pin connector of the Sharp GP2Y0A51 analog distance sensors. Polol 2411
6-pin female JST SH-type connector that works with Micro Metal Gearmotor Encoders. Pololu 4764
6-pin female JST SH-type connector that works with Micro Metal Gearmotor Encoders. Pololu 4762
6-pin female JST SH-type connector that works with Micro Metal Gearmotor Encoders. Pololu 4763
A 150mm 2-wire cable terminated with a plug and socket JST SM2P.
A 150mm 3-wire cable terminated with a plug and socket JST SM3P.
A 150mm 2-wire cable terminated on both sides with an XH2.54 plug. 22AWG cable diameter.
Qwiic to Grove adapter cable, 100 mm long. Enables interoperability between the SparkFun Qwiic Connect system and Seeed Studio I2C-based Grove boards. SparkFun PRT-15109
A set of 10 cables, 30 cm long, compliant with the Gravity standard. DFRobot FIT0513
Set of 10 cables, 30 cm long, for analog sensors compatible with the Gravity standard. DFRobot FIT0031
Set of 10 cables, 30 cm long, for digital sensors compatible with the Gravity standard. DFRobot FIT0011
4-core cable, 50 cm long, terminated on both sides with a Grove plug. Compatible with the interface used in the M5Stack modules. M5Stack A034-C
JST-PH three-wire connection cable, 20 cm long, 2 mm grid
The connection cable (20 cm length) is terminated with a JST PH 2.0 2-pin plug and a flat (female) connector with a width of 4.8 mm
Set of 10 cables, 50 cm long, for digital sensors compliant with the Gravity standard. DFRobot FIT0756