KAmodWS2812-1 - module with RGB WS2812 diodes
ID: 558151
5906623432530
zł7.40
Tax included
zł6.02 tax excl.
KAmodWS2812-1 is a module with WS2812 multicolor LED. Thanks to the embedded controller, LED can be series connected to makes an amazing light effects. KAmodWS2812-1
Description
KAmodWS2812-1 module allows to create lighting effects of any color, and thanks to the controller built into the WS2812 diode, it is possible to combine modules into rows, creating any shapes. Regardless of the number of connected LEDs, the control is transmitt with using one signal cable.
Features
- Tri-color LED (RGB) WS2812 type, with embedded controller
- Possibility of series connection of additional modules without extra signal lines
- Each of basic colors can controlled with up to 256 brightness levels
- Possibility of displaying more than 16.7 mln light tone
- Power supply voltage: 5...7V
- Wire that connects two modules can be up to 5m length without additional amplifier
- Holes for soldering of pin connector
- Two mounting holes 3mm
- Module size (without connectors): 18mm x 11.5mm x 3.5mm
Example application KAmodWS2812-1 and KAmduino UNO
Kit content
- KAmodWS2812-1 module
- Two 3-pin connectors (male straight) for soldering
558151
Data sheet
- Voltage
- 5 - 7 V
- Colour
- RGB
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
WS2812S is a three-color, closed in a housing with a controller, RGB diode in an SMD5050 housing with PLCC-6 terminals. The diodes can be connected in series, thanks to which you can control whole chains of such diodes with three wires.
zł1.16
24h
Available quantity: 2187
Available
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
zł25.26
24h
Available quantity: 2
Available
Other products in the same category (16)
No product available!
Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector
zł7.61
24h
Available quantity: 14
Available
Gravity module with a colored RGB WS2812 LED. Thanks to the controller built into the diode, you can connect the modules in series and control all with one microcontroller port. DFRobot DFR0605
zł8.29
24h
Available quantity: 3
Available
Kitronik 2766 is a yellow LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.
zł23.16
24h
Available quantity: 5
Available
RGB Panel Shield is an extension in the form of shield overlays designed for Arduino. With its help it is possible to control the RGB 32x32 LED display (refresh 1: 8). Communication with the display takes place via a 2x8 connector. SparkFun SPX-14721
zł40.47
24h
Available quantity: 1
Available
The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243
Regular pricezł87.54zł76.62
24h
Available quantity: 1
Available
Module with green LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030007
zł12.71
24h
Available quantity: 2
Available
Module with flashing multi-color LED. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030014
zł12.74
4 weeks
No product available!
Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector
zł7.61
24h
Available quantity: 14
Available
A module for building a rear bicycle light using 1000 mCd red LEDs. Power supplied by AA batteries, which are not included in the kit. Kitronik 2106
zł9.90
24h
Available quantity: 5
Available
Flashlight module using a bright 5000 mCd white LED. Power is supplied by a 12 V N-type battery, which is included in the set. The flashlight is equipped with a slide switch for convenient switching on and off. Kitronik 2114
zł14.50
24h
Available quantity: 4
Available
HK Blue 16 LED Circular Light Board with Lead (28512)
zł13.47
24h
Available quantity: 1
Available
Module with white LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030009
zł13.16
24h
Available quantity: 2
Available
Module with green LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-G
zł10.49
24h
Available quantity: 1
Available
Kitronik 2712 is a red LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.
zł22.73
24h
Available quantity: 10
Available
Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector
zł7.61
24h
Available quantity: 13
Available
KAmodWS2812-1 is a module with WS2812 multicolor LED. Thanks to the embedded controller, LED can be series connected to makes an amazing light effects. KAmodWS2812-1