New products
New products
Available
Available
Available
Available
Available
Available
KAmodPCF8883T – module with capacitive touch sensor
ID: 576065
5906623432721
zł19.90
Tax included
zł16.18 tax excl.
KAmodPCF8883T is a module with capacitive touch sensor PCF8883 from NXP. The module has a probe placed on the PCB and a diode indicating the state of the chip. It enables work in one of three modes.
Description
KAmodPCF8883T is a module with capacitive touch sensor PCF8883 from NXP. The board is equipped with a Pmod GPIO standard connector with one digital output informing about the status of the sensor output depending on the selected mode of operation and a KAMAMI connector, allowing easy connection of the module to development kits. The module has a probe placed on the PCB and a diode indicating the state of the chip. Due to its small dimensions, the product can be used in many development projects.
The module is equipped with jumpers enabling configuration of the system's operating mode. One of three jumpers may be on. Allows you to select the system operation in the mode:
- PB (Push Button) - the output is high as long as the probe event occurs
- PUL (Pulse) - the event is active for 1 second after the event occurs on the probe
- TOG (Toggle) - the occurrence of an event on the probe causes a change in the state on the output pin
Features
- NXP PCF8883T system
- Dynamic proximity sensor
- Wide input capacity range
- Automatic calibration
- Configurable operating mode (push-button, toggle, pulse)
- Wide operating temperature range: -40oC to +85oC
- Probe placed on the PCB
- Diode signaling the status of the OUT output
- Connector compatible with the Pmod GPIO standard
- Connector in accordance with the KAMAMI standard
- Built-in jumpers for selecting the system operation mode
- Can be supplied with voltage from 3 to 9 V
- Mounting holes with a diameter of 2.5 mm
- Dimensions: 51.3 mm x 20.3 mm x 10 mm
576065
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A 30 cm long connecting cable (4 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF04S connector that KAmod modules are equipped with. cabhu04-30
zł6.90 Delivery date unknown No product available!
Capacitive proximity switch with auto-calibration, large voltage operating range and very low power consumption, SOIC8, NXP, RoHS
Delivery date unknown No product available!
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł6.10 Delivery date unknown No product available!
A set of 40 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-40-17)
zł5.69 24hAvailable quantity: 303 Available
Other products in the same category (16)
- Available
Module of a stereo 24-bit audio converter with I2S interface (TS4657).
zł59.00 24hAvailable quantity: 68 AvailableKAmodVL6180X is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8...5.5V power supply voltage.
zł39.00 24hAvailable quantity: 298 AvailableSimulation set for Siemens S7-1200 PLC devices. Using this set, it is possible to verify the operation of a program written for a PLC by applying the appropriate states to the digital inputs, to the analogue (ADC) inputs voltages from the built-in or external sensors. LED status monitoring is possible
zł249.90 24hAvailable quantity: 71 AvailableKAmodPCA9533 is a module with LED driver from NXP. The module allows you to control the brightness of 4 LEDs using programmable PWM signals (with a frequency from 0.591 Hz to 152 Hz). I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector
zł21.89 24hAvailable quantity: 235 Available- Available
KAmodMMA8451Q is a module with the MMA8451Q three-axis accelerometer from NXP. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMMA8451Q
zł24.90 24hAvailable quantity: 240 AvailableExpander (overlay) extending the functionality of the STM32 Nucleo development board. Shield has ST Morpho connectors and is equipped with in a four-segment 7-segment display, four RGB diodes, LIS35DE accelerometer, LPS25HB pressure sensor, and DS18B20 digital thermometer
zł81.52 24hAvailable quantity: 178 Available- Available
KAmodMPC17C724 is a module with a double MP bridge bridge type MPC17C724. The system allows you to control two DC brush motors or one bipolar stepping motor. The controller operates at a voltage range of 2.7 - 5.5 V and can work with motors with power consumption up to 0.4 A.
zł19.90 24hAvailable quantity: 338 AvailableKAmodMAG3110FC is a module with magnetic field sensor MAG3110FC from NXP. The sensor measures the magnetic field in the range of ±1000μT, with a resolution of 0.1μT. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMAG3110FC
zł24.90 24hAvailable quantity: 354 AvailableMultifunctional expander (shield) for NUCLEO and Arduino equipped with Bluetooth 2.0+EDR (HC-05) interface, MEMS 3DoF LIS35, LED-RGB, joystick and analog STLM20 temperature sensor developed and produced by KAMAMI.
zł99.00 24hAvailable quantity: 37 Available- Available
KAmodLSM6DS3 is a module that allows measurement of acceleration and angular velocity values. It has a built-in voltage stabilizer and level translators on SDA / SCL lines, thanks to which it can be used in 2.5-5.5V voltage systems
zł27.48 24hAvailable quantity: 164 AvailableKAmodHTS221 is a module that allows the measurement of humidity and temperature, and thanks to the built-in stabilizer and translator levels, it can be successfully used in systems supplied with a voltage of 2.5 - 5.5 V
zł34.90 24hAvailable quantity: 225 AvailableKAmodMIC_ELECTRET is a module with microphone KPCM6B type. Thanks to embedded amplifier with hundredfold amplification of signal, output voltage can be measurement in microcontroller with using e.g. ADC converter.
zł10.90 24hAvailable quantity: 167 Available
KAmodPCF8883T is a module with capacitive touch sensor PCF8883 from NXP. The module has a probe placed on the PCB and a diode indicating the state of the chip. It enables work in one of three modes.