KAmodHTS221 - humidity / temperature sensor module with HTS221 system
ID: 558410
5906623432547
zł34.90
Tax included
zł28.37 tax excl.
KAmodHTS221 is a module that allows the measurement of humidity and temperature, and thanks to the built-in stabilizer and translator levels, it can be successfully used in systems supplied with a voltage of 2.5 - 5.5 V
Description
The KAmodHTS221 module operates based on the HTS221 humidity / temperature sensor from STMicroelectronics, which is characterized by the ability to measure temperature in the range of 0 - 60 ° C, or air humidity in the range of 0 - 100%. Communication with the module can take place via the I2C or SPI bus, and thanks to the built-in stabilizer and translator of the voltage on the SDA and SCL lines, it is possible to operate the module with various bus voltage standards.
properties
- HTS221 humidity / temperature sensor from STMicroelectronics
- Measuring range: 0 - 100% RH (humidity) / 0 - 60 ° C (temperature)
- Humidity accuracy: ± 6% (0 - 100% RH) / ± 4.5% (20 - 80% RH)
- Temperature measurement accuracy: ± 1 ° C (0 - 60 ° C) / ± 0.5 ° C (15 - 40 ° C)
- Frequency of measurements (ODR): 1 - 12.5 [Hz]
- ADC converter resolution: 16 bits
- Communication interface: SPI / I2C
- Built-in stabilizer and voltage level translator (SDA, SCL lines)
- Data readout output (DRDY)
- Holes for soldering a pin connector
- Supply voltage: 2.5 - 5.5 V
- Power consumption: 9 mA
- Mounting holes with a diameter of 3 mm
- Module dimensions (without connector): 24 x 15 x 3 mm
Application example
Included
- Assembled module board
- Male straight pin connector (8 pin) for soldering
- Male goldpin connector angled (8 pin) for soldering
558410
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Capacitive digital sensor for relative humidity and temperature, HLGA-6L, STM, RoHS
zł247.60
Delivery date unknown
No product available!
Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019
zł62.32
24h
Available quantity: 5
Available
BME280 integrates onboard temperature sensor, humidity sensor and barometer. It provides both SPI and I2C interfaces; and can be widely used in environmental monitoring, story height measurement and Internet of Things (IoT) control and so on. SEN0236
zł80.53
24h
Available quantity: 3
Available
I2C BME680 Environmental Sensor is a gas, pressure, temperature and humidity sensor in one MEMS housing. The module is supplied with 3.3-5V, for communication the I2C or SPI interface is used. DFRobot SEN0248
zł112.72
24h
Available quantity: 2
Available
Other products in the same category (16)
Module with SHT35 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020592
zł63.76
24h
Available quantity: 1
Available
Module with a BME680 sensor that allows you to measure temperature, humidity, pressure and gas detection. The board is equipped with a Grove connector and communicates via I2C and SPI. Seeed Studio 101020513
zł110.07
4 weeks
No product available!
Module with SHT31 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020212
zł52.95
24h
Available quantity: 1
Available
Digital Temperature & Humidity Sensor - SHT10 temperature and humidity sensor with a stainless probe
Temperature and humidity sensor SHT10 with a stainless probe. Provides high temperature and pressure resistance. DFRobot SEN0148
zł163.41
24h
Available quantity: 1
Available
Module with BME680 sensor for measuring the concentration of volatile organic compounds (VOC), pressure, temperature and humidity. I2C or SPI communication. DFRobot SEN0375
zł79.85
24h
Available quantity: 3
Available
Integrated BME688 gas, pressure, temperature and humidity sensor in one MEMS housing. The system can be supplied with the voltage of 3.3 V and is equipped with an I2C communication interface. BME688 Breakout Board
zł159.90
24h
Available quantity: 2
Available
Set of sensors with cables. They can detect gestures, movement, touch, sound, and measure humidity, temperature, altitude and acceleration. SparkFun DEV-16156
zł815.50
3 weeks
No product available!
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM472
zł75.68
24h
Available quantity: 6
Available
Module with BME680 sensor to measure the concentration of volatile organic compounds, pressure, temperature and humidity. It communicates via the I2C interface. Pimoroni PIM357
zł115.82
24h
Available quantity: 4
Available
Module with a temperature and humidity sensor based on the SHT40 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4885
zł28.70
24h
Available quantity: 5
Available
Module with integrated BME688 gas, pressure, temperature and humidity sensor placed in one MEMS housing. It is equipped with an I2C interface. Adafruit 5046
zł101.93
24h
Available quantity: 3
Available
A module with a temperature and humidity sensor based on the AHT20 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4566
zł23.95
24h
Available quantity: 3
Available
Module with BME680 for measuring the concentration of VOC, pressure, temperature and humidity. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 3660
zł105.20
24h
Available quantity: 1
Available
Module with a temperature and humidity sensor based on the HTU31 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4832
zł39.52
24h
Available quantity: 3
Available
Temperature and humidity sensor module based on the HTS221 chip. Equipped with a STEMMA QT connector, it communicates via an I2C or SPI interface. Adafruit 4535
zł57.90
24h
Available quantity: 2
Available
Module with a pressure, temperature and humidity sensor based on the MS8607. Equipped with a STEMMA QT connector, it communicates via the I2C. Adafruit 4716
zł73.57
24h
Available quantity: 1
Available
KAmodHTS221 is a module that allows the measurement of humidity and temperature, and thanks to the built-in stabilizer and translator levels, it can be successfully used in systems supplied with a voltage of 2.5 - 5.5 V