![Aluminum mounting profile for LED strips, V-shaped, silver with a milky cover Aluminum mounting profile for LED strips, V-shaped, silver with a milky cover](https://kamami.pl/48825-large_default/aluminum-mounting-profile-for-led-strips-v-shaped-silver-with-a-milky-cover.jpg)
![Aluminum mounting profile for LED strips, V-shaped, silver with a milky cover Aluminum mounting profile for LED strips, V-shaped, silver with a milky cover](https://kamami.pl/48825-large_default/aluminum-mounting-profile-for-led-strips-v-shaped-silver-with-a-milky-cover.jpg)
zł13.54 tax excl.
Aluminum mounting profile for LED strips. It is V-shaped, silver in color with a milky mask
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Aluminum mounting profile dedicated to LED strips up to 10 mm wide. It is easy to install, incl. with glue or thanks to the handles included in the set.
Provides protection against dirt. The LEDs are covered with a special cover made of polycarbonate, which ensures good light diffusion. The profile can be mounted both on the surface and built into prepared recesses.
The profile is not waterproof, therefore it can be used for lighting installations inside buildings and in places not exposed to direct weather conditions.
Blue LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21
Green LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21
Red LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21
Corner connector for V-shaped mounting profiles. In white
Corner connector for V-shaped mounting profiles. In black
No product available!
LED diode 10LED red - bargraph, replacement for: DC-10EWA
No product available!
Module with white LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030009
LED 5 mm OVAL ultra white, angle 130 degrees / 70 degrees; light 3000 mcd (20mA) (3.2V)
LED strip with addressable RGB WS2813 diodes on a white PCB. It is powered by 5 V DC, has a length of 1 m and 30 LEDs/m. Protection degree IP67
Red LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21
Colorful RGB LED in SMD5050 housing enclosed in a housing with a controller communicating via the SPI interface. The diodes can be connected in series, so that entire chains of such diodes can be controlled using four wires. APA102
Easy-to-install indicator signaling the operation of devices or systems, with an attached resistor and adapted to work with 12V supply voltage
3mm yellow LED. 1000 pieces in the package
8x8 pixel LED matrix display with red LEDs. The module is equipped with the 74HC595 controller and communicates via the I2C interface
RGB LED strip consisting of 120 colorful WS2812 LEDs. The diodes are controlled by one signal line. The strip can be arbitrarily bent or cut. Equipped with adhesive tape for easy assembly. DFRobot FIT0612
LED RGB WS2812B, Black Strip, 5m, 30LEDs / m, no waterproof
This is the second version of the Flora NeoPixels, which runs at at \'high speed\' 800KHz communication. Adafruit 1260
Aluminum mounting profile for LED strips. It is U-shaped, silver in color with a milky mask
Aluminum mounting profile for LED strips. It is V-shaped, silver in color with a milky mask