- -zł10.92
zł62.29 tax excl.
The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243
This satellite module is a balanced array of 4 red, 3 blue, and 3 green LEDs, each of which supplies ~35,000 mcd over a 140 degree viewing angle. Combine with the ShiftBar current-control module to create a string of super-bright clusters (about as bright as 15 ShiftBrites.) Each channel of the Satellite Module requires 9 to 10 VDC at 100mA. There are no current control resistors; you can add your own or use this with a ShiftBar, which has current control. When using a ShiftBar, the potentiometer should be set around 75%. More information can be found on the macetech documentation page.
Eight Satellite Modules can also be independently controlled by a single OctoBrite DEFILIPPI, though they will not be at their maximum possible brightness because of the lower current limit of the OctoBrite. For RGB LED modules designed specifically for the OctoBrite, consider the 003 and 004 Satellite Modules.
An example setup using a Micro Maestro to control a ShiftBar and Satellite Module is shown below. Digital outputs 0, 1 and 2 are used to send the control signals to the clock, latch, and data lines of the ShiftBar, the enable line is connected directly to GND, and 12V power to the Maestro is delivered from the ShiftBar chain.
| Current rating: | 100 mA1 |
|---|---|
| Minimum operating voltage: | 9 V |
| Color: | RGB2 |
| Lens type: | clear |
| Size: | 1.6" x 1.6" |
|---|
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
3-channel constant current LED driver module, RoHS
Module with green LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030007
No product available!
Module with a purple LED diode. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020002
Module with flashing multi-color LED. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030014
No product available!
Module with white LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030009
Module with blue LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030010
No product available!
Module with 7 RGB LEDs WS2812 type controlled by serial signal. It can be powered by 5V, only one signal line is required for control
No product available!
RGB diode module. Each color is controlled by individual R, G and B inputs. SparkFun DEV-13735
Module with ATSAMD51J19 microcontroller and ESP32 WiFi system dedicated to matrix displays with HUB75 interface. Adafruit 4745
Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector
Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector
Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector
Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector
Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector
Module with RGB LED diode that allows you to control individual colors using PWM signals. It has an XH2.54 connector
A set of 10 mini modules with addressable RGBW Neopixel LEDs. The diodes are controlled using a popular single-wire interface, and their design allows the modules to be connected in series. Adafruit 4776
Module with two white diodes. Dedicated to Voron 3D printers as hotend and printing nozzle lighting
The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243