![Main view Main view](https://kamami.pl/75677-large_default/usb-to-lora-data-transfer-module-based-on-sx1262-suitable-for-data-acquisition-in-industry-and-agr.jpg)
![Main view Main view](https://kamami.pl/75677-large_default/usb-to-lora-data-transfer-module-based-on-sx1262-suitable-for-data-acquisition-in-industry-and-agr.jpg)
zł65.73 tax excl.
A LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 868 MHz frequency band and is equipped with a USB interface. Waveshare USB-TO-LoRa-HF-B
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
USB-TO-LoRa-HF is a LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 868 MHz frequency band and is equipped with a USB interface. It has the form of a small USB Dongle. It is based on the SX1262 module and uses LoRa Modulate and Demodulate technology.
Compared to traditional communications, the implemented LoRa Chirp Spread Spectrum (CSS) and Frequency Hopping Spread Spectrum (FHSS) technologies significantly improve the performance of long-range and anti-jam communications, widely used in military and industrial communication domains. The module provides multiple software-configurable communication methods. It can operate in streaming or packet, point-to-point or point-to-multipoint mode and can realise a multi-level relay network, suitable for very long-range or complex communications environments.
The module can be operated using AT commands, which allow the user to send a request for the current status or set operating parameters. The stability and security of the communication is ensured by AES encryption. The module actively monitors ambient noise before sending. If it exceeds a threshold, sending will be delayed. This feature can improve communication performance in harsh environments. In addition, it supports RSSI, the signal strength output of the data packet, which can be used to assess signal quality and measure distance.
The module will find application for long-distance data transmission in industry and agriculture. Full documentation and configuration examples are available on the product page.
LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 868 MHz frequency band and is equipped with RS232, RS485 and RS422 industrial interfaces. Waveshare SX1262-LoRa-DTU-HF
A LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 868 MHz frequency band and is equipped with a USB interface. Waveshare USB-TO-LoRa-HF
A LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 433 MHz frequency band and is equipped with a USB interface. Waveshare USB-TO-LoRa-LF-B
LoRa module operating at 433 MHz based on the SX1262 chip. It allows to realize long-range wireless data transmission. Waveshare Core1262-LF
No product available!
LoRaWAN SX1303 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1303 868M LoRaWAN Gateway (B)
No product available!
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2
LoRa module with RP2040 microcontroller. It uses the SX1262 chip, ensuring reliable long-distance communication in the frequency range from 850 to 930 MHz. Waveshare RP2040-LoRa-HF
Cap for use with shallow Feather series, with radio module RFM95W 900MHz. It offers a range of up to 2 kilometers (the range can be increased by using an external antenna). It has a SPI interface. Adafruit 3231
Shield with RFM95W 915 MHz system for LoRa/LoRaWAN communication, designed for Arduino boards. SHIELD-LORA-RFM Citron
IoT development kit with STM32WLE5JC chip that connects microcontroller with ARM Cortex-M4 core and LoRa SX126X module. It has all the pins of the LoRa-E5 module, I2C, SPI, UART, RS485 interfaces and an external antenna. Seeed Studio 113990934
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
LoRa radio module with 433 MHz operating frequency. Communication takes place via the SPI serial interface. It is supplied with the voltage of 3.3 V
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1268 433M LoRa HAT
No product available!
LoRa radio module with 433 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0116
Module with LoRa transmitter based on RFM95 (SX1276 LoRa®). It works with a frequency of 433 MHz, maximum power up to 100 mW and a power gain of up to + 20dBm. The module has a built-in antenna, but it is possible to connect an external antenna (MHF connector). The module has a connector in accordance with the Grove standard. Seeed studio 113060007
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. Designed for surface mounting. Seeed Studio 317990687
Converter with RS232 and RS485 industrial interface and LoRa wireless communication. It allows direct data transmission without the need to support an additional protocol. USR-LG206-H-P
No product available!
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M
The expansion board with the LoRa E22-900T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and enables communication in the 868 MHz frequency band. SB Components 21628
A LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 868 MHz frequency band and is equipped with a USB interface. Waveshare USB-TO-LoRa-HF-B