New products
New products New products
Available
zł73.14
24h
Available
zł1,049.01
24h
Available
Pololu 2681 - Pololu Mini Plastic Gearmotor Bracket Pair - Tall
ID: 561583
5906623477982
zł26.60
Tax included
zł21.63 tax excl.
These tall brackets offer an easy and convenient mounting solution for mini plastic gearmotors.
Overview:
These plastic mounting brackets are specifically designed to work with our mini plastic gearmotors (with or without encoders). Both the offset and 90-degreeconfigurations of the mini plastic gearmotors are compatible with these brackets. The brackets are sold in pairs, and four M3×12mm screws and M3 nuts are included (two for each bracket). In some orientations, the mini plastic gearmotors have a lip that causes the bracket to be raised off of the mounting surface; for those cases, two 1.25mm-thick spacer plates (one for each bracket) are also included. You can see the spacer being used in the two pictures below.
Note: When using this tall version of the bracket with one of the 90° Output mini plastic gearmotors (i.e. the setup in the left picture above), only our 60mm-diameter wheels (or smaller) will fit in the space between the output shaft and the mounting tab. The mounting tab will rub or interfere with larger-diameter wheels.
Dimensions:
Dimensions:
| Weight: | 1.4 g1 |
|---|
General specifications:
| Color: | white |
|---|
Notes:
- 1 For a single bracket only (no screws, nuts, or spacers). With a single spacer, it weighs an additional 0.4 g.
561583
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511
zł24.53
24h
Available quantity: 1
Available
High-power brushed DC motor, 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is offset from but parallel to the motor shaft, built-in safety clutch. Pololu 1512
zł24.53
24h
Available quantity: 1
Available
This compact, inexpensive plastic gearmotor (brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.
zł41.56
24h
Available quantity: 1
Available
This compact, inexpensive plastic gearmotor (high-power brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.
zł39.13
24h
Available quantity: 1
Available
These wide brackets offer an easy and convenient mounting solution for mini plastic gearmotors. The white plastic bracket clasps securely around the gearmotor, and the mounting tabs capture the nuts for easy installation. These brackets are sold in pairs, and each bracket comes with two M3 screws, two nuts, and a spacer.
zł26.60
24h
Available quantity: 4
Available
Other products in the same category (9)
These aluminum gearmotor brackets let you securely mount our larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1 90-degree, and 120:1 90-degree) to your project. These brackets are sold in pairs, and each bracket comes with two 1″ long and two 0.75″ long #2-56 screws for securing different size motors.
zł31.11
24h
Available quantity: 3
Available
These extended aluminum gearmotor brackets let you securely mount our larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1 90-degree, and 120:1 90-degree) to your project. The extended “neck” on these brackets allows for a large variety of mounting options. These brackets are sold in pairs, and each bracket comes with two 1″ long #2-56 screws for securing motors to the bracket.
zł31.02
4 weeks
No product available!
L-bracket for NEMA23 stepper motor (Bracket L). Allows for safe assembly of the motor in the device
zł8.17
24h
Available quantity: 19
Available
Extremely versatile gear motor enclosures provide protection for the gears and offer numerous mounting options to fit a variety of custom applications. Suitable for Pololu micro motors series. ROB-12105
zł8.00
24h
Available quantity: 5
Available
These aluminum gearmotor brackets let you securely mount Pololu’s 25D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes two M3 screws for securing the motor to the bracket. Each bracket also features seven mounting holes and twelve mounting slots for M3 or #4-size screws (not included), giving you a variety of mounting options.
zł52.32
24h
Available quantity: 2
Available
This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slots and holes for a wide variety of mounting solutions, and four M3×6mm screws are included for securing the motor to the bracket. Pololu 2266
zł32.93
24h
Available quantity: 3
Available
These wide brackets offer an easy and convenient mounting solution for mini plastic gearmotors. The white plastic bracket clasps securely around the gearmotor, and the mounting tabs capture the nuts for easy installation. These brackets are sold in pairs, and each bracket comes with two M3 screws, two nuts, and a spacer.
zł26.60
24h
Available quantity: 4
Available
A set of two black plastic brackets for mounting micro motors. The set includes mounting screws and nuts. Pimoroni COM0817
zł22.26
24h
Available quantity: 2
Available
L-bracket for NEMA17 stepper motor (Bracket L). Allows for safe assembly of the motor in the device
zł4.31
24h
Available quantity: 22
Available
These tall brackets offer an easy and convenient mounting solution for mini plastic gearmotors.