Modbus POE ETH Relay module with 8 relays and Ethernet communication - Waveshare 24964

AO3406 MOSFET transistor module with N channel and JST PH2.0 connector designed to control motor, solenoid or LEDs. Adafruit 5648

Module with 32 24 V relays with a load of up to 7 A. The board communicates via the Ethernet interface. Numato Lab 32ETHRL001-24

Module with a relay and WiFi communication. Compatible with ESP-01 or ESP-01S

The Pololu 5423 module provides reliable load control in RC systems with full galvanic isolation. The SPST solid-state relay supports up to 6 A at voltages up to 60 V and is suitable for applications requiring silent operation, durability, and precise control using RC signals. The version without soldered connectors offers flexibility for adaptation to individual projects.

The module with the relay is designed for the M5Stack sets. It allows you to control devices with a working voltage of up to 220 V AC and a current of up to 3 A or a voltage of 30 V DC and an intensity of 3 A. M5Stack U023

The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano

Module with two 240V/2A relays controlled by 5V with a fuse triggered by a high state. modSSR-2CH-H

This SPST solid-state relay module allows for safe switching of DC circuits up to 60 V and 7 A, offering galvanic isolation and low conduction resistance (approx. 30 mΩ) thanks to the use of back-to-back MOSFET transistors. It features fast switching time (up to 1 ms), low control current consumption (approx. 10 mA), and the ability to control a signal from 2.7 to 40 V. Its compact design, lack of mechanical components, and the ability to mount on 2.54 mm connectors or screw terminals make the module a durable and quiet solution for systems requiring reliable isolation and long service life. Pololu 5420

Module with 2 SSR relays with a load of up to 3 A. The board is equipped with the ULN2003 system and communicates via a digital interface. Numato Lab SSRC20001-DC

Industrial relay module controlled via RS485 interface with Modbus RTU protocol support, offering 8 outputs with maximum load of 10 A. Equipped with galvanic isolation, opto-isolation, TVS diodes and DIN mounting, it ensures safe and reliable operation in harsh industrial conditions. Thanks to functions such as flash-on/off, configurable RS485 address (1-255), signaling diodes and wide power supply range (7-36 V), the module is perfect for building automation and device control. Waveshare Modbus RTU Relay (B)

Module with 2 SSR relays with a load of up to 3 A. The board communicates via the USB interface. Numato Lab SSR20001-DC

Module with one 240V/2A relay controlled by 5V with a fuse triggered by a high state. modSSR-1CH-H

A versatile module that allows you to control higher voltage devices such as 12V LED strips while simultaneously powering a microcontroller from 3.3V. The module integrates an LMR14203 converter and an N-channel MOSFET (PSMN7R0-100BS), allowing you to power the board at up to 12V and drive loads up to 10A, with additional protection features and LED indicators, making it ideal for projects requiring efficient power control. SparkFun COM-23979

The module is equipped with eight 10A / 250VAC relays controlled independently via a serial bus (UART) or from a PC (through a microUSB connector). The NO / NC contacts of the relays have been led to the ARK screw terminals. The board recommended for use with Arduino enables the control of eight relays using only two microcontroller lines. ICSTATION ICSE014A

Module with 4 SSR relays with a load of up to 3 A. The board communicates via the Ethernet interface. Numato Lab 4ETHSSR001-DC

Switch module with a maximum voltage of 12 V and a current of 10 A based on a MOSFET transistor, controlled by a digital pin. It is equipped with a screw connection and a status LED. SparkFun SPX-19799