L76X GPS HAT Module for Raspberry Pi - Waveshare 16193
ID: 577919
5906623439430
zł109.68
Tax included
zł89.17 tax excl.
GPS module with GNSS L76X receiver. It can receive data from GPS, BDS and QZSS systems. It uses the UART interface and offers an accuracy of up to 2.5 m. Waveshare L76X GPS HAT
Description
GPS module with GNSS L76X receiver designed to work with the Raspberry Pi and Jetson Nano minicomputer. The system can receive data from the main positioning systems: GPS, BDS and QZSS. It is characterized by fast positioning, high accuracy and low energy consumption. The module has a 40-pin connector, compatible with the Raspberry Pi. The board also has a socket with an ML1220 battery that maintains voltage, which significantly accelerates the start of the device after a momentary power failure. The user can also connect an external antenna through the u.FL connector located on the board.
| 1. L76B | 7. LED |
| 2. USB-UART CP2102 | 8. 40-pin connector |
| 3. EEPROM CAT24C32 | 9. USB port |
| 4. Power manager RT9193-33 | 10. u.FL connector |
| 5. Wake-Up | 11. Battery holder |
| 6. Standby | 12. Jumpers |
The module is configured via a USB connector and a dedicated u-center application. Full documentation is available on the product Wiki page.
Features
- Integrated u.FL connector
- Receives bands L1 (1575.42Mhz), BD2 B1 (1561.098MHz)
- Accuracy 2.5 m
- Maximum update rate: 1 Hz (by default), 10 Hz (max)
- Start-up time: 15s (cold start), 1s (hot start)
- Maximum altitude: 18,000 m
- Max G: ≤4
- Maximum speed: 515 m / s
- Protocol: NMEA 0183, PMTK
- Interface: UART 4800 to 115200bps (9600 by default)
- 40-pin connector
- ML1220 battery socket
- Voltage: 3.3 / 5V
- Current consumption: 13 mA
- Dimensions: 65 x 30.5 mm
Kit contains
- L76X GPS HAT
- GPS antenna
- USB-A to Micro-B cable
- A set of screws
- 2x20-pin female connector
577919
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł393.90
24h
Available quantity: 48
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,055.36
24h
Available quantity: 1
Available
Other products in the same category (16)
LC76G GNSS receiver module. It can receive data from GPS, GLONASS, Galileo, BDS and QZSS systems. It uses a UART or I2C interface and offers an accuracy of up to 1.5m. Waveshare LC76G GNSS Module
zł64.66
24h
Available quantity: 3
Available
GPS module with GNSS receiver ZED-F9T. It supports L1 / L2 / E5b bands and provides clocking accuracy of up to five nanoseconds. Qwiic connector. SparkFun GPS-18774
zł1,838.15
3 weeks
No product available!
Available
Air530Z GPS module with external antenna. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020022
zł47.90
24h
Available quantity: 1
Available
Industrial 4G module with Qualcomm SIM7600E-H chip. It allows you to connect devices with USB or UART communication with 4G networks. Waveshare SIM7600E-H 4G DONGLE
zł234.66
24h
Available quantity: 3
Available
Kit with GNSS RTK Surveyor receiver, L1/L2 antenna and accessories. It allows you to get centimeter-level global positioning measurements using GNSS RTK. SparkFun GPS-17370
zł3,566.32
3 weeks
No product available!
Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. Waveshare Pico-SIM868-GSM/GPRS/GNSS
zł113.38
24h
Available quantity: 4
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
zł107.45
24h
Available quantity: 2
Available
The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (with case) (EU)
zł1,861.14
4 weeks
No product available!
Advanced precision positioning tool based on Septentrio\'s mosaic-X5 multi-constellation GNSS receiver, achieving 6 mm RTK accuracy. Supports GNSS signals from various systems, such as GPS, GLONASS, Galileo, Beidou, NavIC and L-band corrections, offering a position update rate of up to 100 Hz, making it ideal for robotic applications. The kit includes an internal web server for configuration, a National Geodetic Survey-certified GNSS antenna and a rugged aluminum housing for easy installation and reliability in harsh environments. SparkFun GPS-23748
zł6,667.62
3 weeks
No product available!
GPS module with LC29H GNSS receiver designed to work with the Raspberry Pi minicomputer. It allows you to receive data from major positioning systems, including GPS, QZSS, GLONASS, Galileo and BeiDou, and supports positioning assistance systems (WAAS, EGNOS, MSAS and GAGAN) and EASY technology. Waveshare LC29H(AA) GPS HAT
zł200.24
24h
Available quantity: 3
Available
Available
GPS module with 72-channel GNSS ZOE-M8Q receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART and I2C interfaces. SparkFun GPS-15193
zł235.43
24h
Available quantity: 1
Available
Ublox GYGPSV1 NEO-8M is a GPS module with a ceramic antenna, EEPROM memory, and a backup battery, providing stable signal reception and the ability to save configuration. It is suitable for robotic projects, drones, and navigation systems, offering easy integration with microcontrollers and testing software.
zł47.97
4 weeks
No product available!
Module with GPS PA1616D receiver based on the MTK3333 system. It is equipped with a USB type C connector and a USB-UART converter. Adafruit 4279
zł154.25
24h
Available quantity: 1
Available
A GNSS module that combines the precise u-blox ZED-F9P receiver with the NEO-D9S L-band GNSS correction data receiver. Provides high-accuracy positioning without the need for separate RTK or NTRIP corrections. SparkFun GPS-22560
zł2,099.00
3 weeks
No product available!
GPS module with GNSS L76X receiver. It can receive data from GPS, BDS and QZSS systems. It uses the UART interface and offers an accuracy of up to 2.5 m. Waveshare L76X GPS HAT