Pololu Dual G2 High-Power Motor Driver 24v18 - dual DC motor driver for Arduino
ID: 569231
zł420.17
Tax included
zł341.60 tax excl.
Pololu Dual G2 High-Power Motor Driver 24v18 is an extension that allows you to control two DC motors designed for Arduino tiles. The motor can be supplied with 6.5 ... 40V voltage and can draw a maximum current of 18A. Pololu 2518
Description
Pololu Dual G2 High-Power Motor Driver 24v18 is an extension that allows you to control two DC motors designed for Arduino tiles. The motor can be supplied with a voltage of 6.5 ... 40 V (recommended maximum voltage is 34 V) and draw a maximum current of 18 A. The motor is controlled by PWM signal with a frequency up to 100 kHz. The board has a built-in inverter (5 V, 1 A) that allows the Arduino to be supplied from the same power source as the motors. The board has no soldered connectors (screw for connecting motors and power supply, goldpin connectors), they should be soldered on their own.
properties
- Intended for use with Arduino tiles
- Inputs compatible with logic voltage; 1.8 / 3.3 / 5 V
- Supply voltage: 6.5 ... 40 V (recommended maximum voltage is 34 V)
- Continuous output current: 18 A
- PWM signal frequency up to 100 kHz
- Built-in 7.5V @ 1A inverter allows you to power Arduino from the same power source as motors (set by default to 5 V)
- Protection against back voltage
- Short-circuit protection
- Dimensions: 65 x 51.3 x 9.7 mm
- Weight: 19 g (board without connectors and assembly parts)
Included
- Pololu Dual G2 High-Power Motor Driver 24v18
- Screw connectors
- Goldpin female connector (1x10, 1x8, 1x6)
- Goldpin male connectors (1x40)
569231
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 57
Available
zł374.87
24h
Available quantity: 1
Available
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink.
zł288.26
24h
Available quantity: 1
Available
Pololu Dual G2 High-Power Motor Driver 18v22 is an extension that allows you to control two DC motors designed for Arduino tiles. The motor can be supplied with 6.5 ... 30V voltage and can draw up a maximum current of 22A. Polol 2517
zł598.99
Delivery date unknown
No product available!
Other products in the same category (16)
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. Pololu 2507
zł294.77
4 weeks
No product available!
Pololu 2512Module with 2-channel DC motor driver for Arduino boards. It allows you to control drives with a supply voltage from 6 to 32 V and a current consumption of up to 0.65 A. Pololu 2512
zł66.92
24h
Available quantity: 3
Available
Pololu Dual MC33926 Motor Driver Shield for Arduino
zł197.80
24h
Available quantity: 2
Available
Shield with DC motor driver for Arduino. It has an operating voltage of 7 to 30 V and a maximum continuous current of 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-MD10
zł67.35
24h
Available quantity: 3
Available
Two-channel DC motor driver designed to work with Arduino boards. The module is based on the H L298 bridge system. It can control two DC motors up to 2 A per channel. SparkFun DEV-14129
zł145.74
3 weeks
No product available!
Pololu - 2511
zł41.29
24h
Available quantity: 2
Available
Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 1.2 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-3AMOTOR
zł111.29
24h
Available quantity: 2
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5041
zł302.08
4 weeks
No product available!
Expansion board for three stepper motor drivers compatible with Arduino Nano. The stepper driver connectors fit A4988 modules
zł15.01
4 weeks
No product available!
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5039
zł352.15
4 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for self-assembly. Pololu 5037
zł327.65
4 weeks
No product available!
Pololu Dual G2 High-Power Motor Driver 18v22 is an extension that allows you to control two DC motors designed for Arduino tiles. The motor can be supplied with 6.5 ... 30V voltage and can draw up a maximum current of 22A. Polol 2517
zł598.99
4 weeks
No product available!
DC motor driver that allows you to control the movement of three drives using the I2C interface. Board with soldered connectors. Pololu 5030
zł223.10
4 weeks
No product available!
DC motor controller that allows the movement of three drives to be controlled via an I2C interface. A board without connectors is included. Pololu 5070
zł106.27
24h
Available quantity: 2
Available
Gravity: IO Expansion & Motor Driver Shield is an Arduino compatible expansion board that provides digital I / O ports, analog I2C, SPI and UART interfaces, as well as a DC motor driver. DFRobot DFR0502
zł65.65
24h
Available quantity: 3
Available
Pololu Dual G2 High-Power Motor Driver 24v18 is an extension that allows you to control two DC motors designed for Arduino tiles. The motor can be supplied with 6.5 ... 40V voltage and can draw a maximum current of 18A. Pololu 2518