Arducam Pico4ML TinyML Dev Kit - development kit with RP2040 microcontroller
ID: 584738
zł150.43
Tax included
zł122.30 tax excl.
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Development kit with RP2040 microcontroller designed for projects using TensorFlow Lite libraries and machine learning. The microcontroller is equipped with two ARM Cortex-M0 + cores, which operate at a frequency of 133 MHz and 264 kB RAM. The board also has a QVGA camera with a resolution of 320 x 240 at 60 fps, an LCD display, an IMU system and a microphone.
The board's equipment makes the set a perfect test platform for projects using artificial neural networks to process sounds, images or motion. The platform supports the popular MicroPython and C/C++ programming languages. Programs can be uploaded to memory via the USB interface in mass storage mode.
Features
- RP2040 microcontroller:
- Two ARM Cortex-M0 + cores clocked up to 133 MHz
- External flash memory: 2 MB
- SRAM memory: 264 kB
- USB 1.1 running in Host and Device modes
- Support low power mode and idle mode
- Drag & Drop programming possible in USB mass storage mode
- 26 x GPIO pins
- Extensive communication interfaces:
- 2 x SPI
- 2 x I2C
- 2 x UART
- 3 x 12-bit ADC
- 16 PWM channels
- Built-in real time clock (RTC)
- Accelerator for floating point numbers
- Temperature sensor
- Supply voltage: 1.8 - 5.5 V
- Working temperature: -20°C to 85°C (recommended maximum temperature 70°C)
- IMU: ICM-20948
- Camera module: HiMax HM01B0, up to QVGA (320 x 240 at 60 fps)
- Screen: 0.96 inch SPI LCD (160 x 80, ST7735)
- Working voltage: 3.3V
- Input voltage: VBUS: 5V +/- 10%, VSYS Max: 5.5V
- Dimensions: 51 x 21 mm
Kit contains
- Arducam Pico4ML Dev Board
- MicroUSB Cable
584738
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.09
24h
Available quantity: 7323
Available
Cables for evaluation boards, set of 10 pcs., blue colour
zł6.32
24h
Available quantity: 320
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł6.32
24h
Available quantity: 218
Available
A set of 10 pieces of female-female connecting cables with a length of 21 cm. CAB_F-F (BK-10-25)
zł7.01
24h
Available quantity: 131
Available
A set of 40 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-40-17)
zł5.90
Delivery date unknown
No product available!
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł20.90
24h
Available quantity: 212
Available
Kit containing Raspberry Pi Pico and Raspberry Pi 4B 4 GB. The kit also includes the necessary connectors, cables, power supply and housing - heat sink
Delivery date unknown
No product available!
Kit containing Raspberry Pi Pico and Raspberry Pi 4B 4 GB. The kit also includes the necessary connectors, cables, power supply and housing - heat sink
Delivery date unknown
No product available!
Other products in the same category (16)
A kit containing an LED strip driver module and WS2812/Neopixel tape. Designed to easily and quickly create animations using popular RGB LED strips. Pimoroni PIM657
zł187.89
24h
Available quantity: 2
Available
Board with RP2040 microcontroller and W6100 network chip. The module is equipped with an Ethernet interface. WIZnet W6100-EVB-Pico
zł58.90
24h
Available quantity: 20
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores. The board also has 4 MB of QSPI flash memory. 1.14" LCD module. TTGO T-Display RP2040
zł84.85
24h
Available quantity: 5
Available
Module with a 2.9" ePaper display and a Raspberry Pi Pico W board equipped with WiFi communication. It has a built-in Qwiic/Stemma QT connector with an I2C interface, buttons and a battery connector. Perfect as a display for a weather station. Pimoroni PIM669
zł282.91
24h
Available quantity: 1
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM578
zł66.22
24h
Available quantity: 9
Available
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00053
zł159.00
24h
Available quantity: 21
Available
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM610
zł154.89
24h
Available quantity: 10
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus
zł28.40
24h
Available quantity: 15
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4888
zł56.40
24h
Available quantity: 2
Available
USB RTC module based on Raspberry Pi RP2040 microcontroller. It combines MicroSD card slot, LCD display and CR1220 battery holder. SB Components SKU25138
zł296.82
24h
Available quantity: 3
Available
NeoPixel 8-channel RGB LED driver. It features an RP2040 microcontroller with two ARM Cortex-M0+ cores, 264 kB of RAM and 8 MB of external Flash memory. Adafruit 5650
zł82.37
24h
Available quantity: 9
Available
A 1.28" circular IPS LCD display module with touch panel. It has a resolution of 240x240 px and is controlled by an RP2040 microcontroller. It is equipped with an accelerometer and a gyroscope. Waveshare RP2040-Touch-LCD-1.28
zł106.04
24h
Available quantity: 2
Available
Board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores and a 5x5 RGB LED matrix. There is also 2 MB of QSPI flash memory on the board. The circuit can be programmed in C/C++ or MicroPython. Waveshare RP2040-Matrix
zł33.90
6 weeks
No product available!
Module with a 7-color ACeP e-Paper display with a diagonal of 7.3" and a resolution of 800 x 480 pixels, equipped with Raspberry Pi Pico W. It offers WiFi communication and has built-in buttons with LED indicators, which allows you to build a simple user interface. Pimoroni PIM655
zł652.22
Delivery date unknown
No product available!
Matrix display module with a Raspberry Pi Pico W control board. It has built-in 1024 RGB LEDs in a 32x32 arrangement, an amplifier with a speaker and buttons. Perfect for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM670
zł579.00
Delivery date unknown
No product available!
Matrix display module with Raspberry Pi Pico W control board. It has built-in 583 RGB LEDs in a 53 x 11 layout, an amplifier with speaker and buttons. Ideal for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM631
zł386.60
24h
Available quantity: 1
Available
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302