Arducam Pico4ML TinyML Dev Kit - development kit with RP2040 microcontroller
ID: 584738
5906623403585
zł138.13
Tax included
zł112.30 tax excl.
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302
Description
Development kit with RP2040 microcontroller designed for projects using TensorFlow Lite libraries and machine learning. The microcontroller is equipped with two ARM Cortex-M0 + cores, which operate at a frequency of 133 MHz and 264 kB RAM. The board also has a QVGA camera with a resolution of 320 x 240 at 60 fps, an LCD display, an IMU system and a microphone.
The board's equipment makes the set a perfect test platform for projects using artificial neural networks to process sounds, images or motion. The platform supports the popular MicroPython and C/C++ programming languages. Programs can be uploaded to memory via the USB interface in mass storage mode.
Features
- RP2040 microcontroller:
- Two ARM Cortex-M0 + cores clocked up to 133 MHz
- External flash memory: 2 MB
- SRAM memory: 264 kB
- USB 1.1 running in Host and Device modes
- Support low power mode and idle mode
- Drag & Drop programming possible in USB mass storage mode
- 26 x GPIO pins
- Extensive communication interfaces:
- 2 x SPI
- 2 x I2C
- 2 x UART
- 3 x 12-bit ADC
- 16 PWM channels
- Built-in real time clock (RTC)
- Accelerator for floating point numbers
- Temperature sensor
- Supply voltage: 1.8 - 5.5 V
- Working temperature: -20°C to 85°C (recommended maximum temperature 70°C)
- IMU: ICM-20948
- Camera module: HiMax HM01B0, up to QVGA (320 x 240 at 60 fps)
- Screen: 0.96 inch SPI LCD (160 x 80, ST7735)
- Working voltage: 3.3V
- Input voltage: VBUS: 5V +/- 10%, VSYS Max: 5.5V
- Dimensions: 51 x 21 mm
Kit contains
- Arducam Pico4ML Dev Board
- MicroUSB Cable
584738
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 2 MB
- Number of I/O
- 26
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 51mm
- Width
- 21 mm
- USB connector type
- microUSB type B
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 2427
Available
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 138
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
24h
Available quantity: 100
Available
A set of 10 pieces of female-female connecting cables with a length of 21 cm. CAB_F-F (BK-10-25)
zł5.84
24h
Available quantity: 60
Available
A set of 40 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-40-17)
zł5.69
24h
Available quantity: 129
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 354
Available
Other products in the same category (16)
Development board with RP2040 microcontroller. Equipped with a microBUS connector, it can work with Qwiic expansion boards. SprakFun DEV-18721
zł68.83
24h
Available quantity: 3
Available
Development board equipped with the Raspberry Pi Pico W module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the RP2040 microcontroller. Can be programmed with Arduino, MicroPython and CircuitPython. SB Components 26630
zł94.85
24h
Available quantity: 3
Available
Module with a round 1.28" IPS LCD display with a resolution of 240x240 px and RP2040 microcontroller. Equipped with an accelerometer and a gyroscope. Waveshare RP2040-LCD-1.28
zł77.05
24h
Available quantity: 11
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-Tiny
zł20.04
24h
Available quantity: 14
Available
Camera adapter based on Raspberry RP2040, dedicated to TinyML development. is equipped with a 2.4-inch LCD screen, microphone, camera connectors and an IMU module. It allows you to take photos, use WiFi, SD card and USB mass storage. ArduCam B0432
zł149.00
24h
Available quantity: 2
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores. The board also has 4 MB of QSPI flash memory. 1.14" LCD module. TTGO T-Display RP2040
zł84.85
24h
Available quantity: 4
Available
A module based on the RP2040 microcontroller that lets you build your own two-player arcade controller, supporting up to 30 buttons and two joysticks. When connected via USB-C, it is automatically detected as a standard game controller on PC, Mac and Linux. With DuPont, Qw/ST connectors and support for backlit Plasma buttons, assembly and expansion are quick and solderless. Pimoroni PIM741
zł143.79
24h
Available quantity: 1
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero
zł14.97
24h
Available quantity: 16
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus
zł23.27
24h
Available quantity: 10
Available
RP2040-Touch-LCD-1.69 is a high-performance, integrated MCU board designed for interactive device developers. With a touch display, 6-axis sensor, RTC, and power management, it is suitable for HMI systems, mobile devices, data loggers, and IoT solutions. Support for MicroPython and Arduino facilitates rapid prototyping and deployment.
zł96.83
24h
Available quantity: 3
Available
NeoPixel 8-channel RGB LED driver. It features an RP2040 microcontroller with two ARM Cortex-M0+ cores, 264 kB of RAM and 8 MB of external Flash memory. Adafruit 5650
zł82.37
24h
Available quantity: 4
Available
Evaluation board with a Raspberry Pi RP2040 microcontroller and a TCP/IP W5500 controller. WIZnet W5500-EVB-PICO
zł55.74
24h
Available quantity: 38
Available
A board with an RP2040 microcontroller equipped with two ARM Cortex-M0+ cores that operate at a frequency of 133 MHz and 264 kB RAM. There is also 16 MB of QSPI Flash memory on the board. The system can be programmed in C/C++ or MicroPython. It offers a DVI connector, a micorSD card slot and a 40-pin GPIO connector. The module has a shape and connector arrangement similar to the popular Raspberry Pi Zero minicomputers. Waveshare RP2040-PiZero
zł42.18
24h
Available quantity: 2
Available
RP2350-LCD-1.28 is an advanced, compact development module with a color LCD display and a rich set of interfaces, designed for embedded projects that require efficient graphics handling and communication. Thanks to its dual processor architectures and programmable peripheral resources, the module is suitable for use in smart devices, HMI systems, and next-generation IoT solutions.
zł59.15
24h
Available quantity: 2
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. In addition, the board is equipped with the Infineon CYW43439 system, extending the board with wireless connectivity. Raspberry Pi SC0918
zł28.91
24h
Available quantity: 1709
Available
Mechanical keyboard module with LED backlight, encoder and display. Based on the RP2040 microcontroller. Adafruit 5100
zł191.27
24h
Available quantity: 1
Available
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302