Tamiya Plug with 10cm Leads, Male
This style of high-current connector is commonly used with the 7.2V battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This male Tamiya connector has 10cm 14-AWG leads with stripped and tinned terminations.
![]() |
This style of high-current connector is commonly used with the 7.2V battery packs that power many RC cars. The connector, sometimes called Tamiya or Kyosho, is keyed so that power cannot be reversed. A latch secures the connection so that it will not become disconnected.
This is the male version of the connector (we also offer a matching female version). Two 10cm 14-AWG wires are crimped inside the connector housing and extend 9cm past the plastic housing. The leads have silicone insulation and stripped, tinned terminations. As an alternative, we sell a Tamiya connector pack that includes housings and crimp pins you can use to attach these male connectors to your own wires.
Note: these Tamiya connectors are sometimes referred to as “female” in the RC hobby industry, so please look at the connector picture below carefully to make sure it is what you want.
|
|
![]() |
| Male Tamiya plug dimensions (in mm). |
|---|
Note: This connector is also available in the smaller mini Tamiya version.
![]() |
Tamiya Plug with 10cm Leads, Female |
![]() |
0.100" (2.54 mm) Breakaway Male Header: 1x40-Pin, Straight |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin 25-Pack |
Manufacturer
Responsible person
RS-232 D-Sub (m) / D-Sub (m) cable 2 m long, uncrossed. Akyga AK-CO-03
No product available!
2m RS-232 D-Sub (f) / D-Sub (f) cable, uncrossed. Akyga AK-CO-04
SATA III to USB 3.0 adapter. It allows you to connect a 2.5" HDD, 3.5" HDD or SSD to a computer via USB. The angle joint facilitates assembly
SATA III to USB 3.0 adapter. It allows you to connect a 2.5" HDD, 3.5" HDD or SSD to a computer via USB. Comes with a 12 V power supply
10 cm long cable with plug and XT60 socket. It allows you to connect a battery with an XT60 socket, e.g. to a charger
15 cm long cable with plug and XT60 socket. It allows you to connect a battery with an XT60 socket, e.g. to a charger
Flexible adapter for microSD to SD card with a length of 50 cm. Supports all capacities and card types, including: 16 GB, 32 GB, 64 GB, 128 GB Micro SD/SDHC
NPN to PNP signal converter. Equipped with overvoltage protection and overcurrent protection. DFRobot FIT0850
Cable dedicated to MyoWare 2.0 muscle tension sensors. It allows you to connect the electrode with the plate in the event that it must be located at a distance from the sensor. SparkFun CAB-19244
B6 charger cable with all the most popular connectors used in batteries
Cables dedicated to MyoWare 2.0 muscle tension sensors. It allows you to connect the electrode with the plate in the event that it must be located at a distance from the sensor. SparkFun KIT-19627
No product available!
Two test leads with crocodile-type connectors and banana plugs. Can be used with e.g. multimeter or power supply
Cable with ESLOV connector, 50 mm long. Allows you to connect two ESLOV boards together or use the ESLOV to Qwiic adapter. SparkFun CAB-24012
High-quality cable equipped with a standard RS232 connector with a DB9 socket and an RJ45 connector. Provides the ability to connect devices with an RJ45 connector to a computer for debugging and communication via the serial port. Waveshare RS232-TO-RJ45-Console-Cable
OBD-II cable serving as a splitter and extension cable, approximately 1 meter long. Connects all 16 pins between each connector, which eliminates diagnostic problems. SparkFun CAB-25070
No product available!
AUX cable of 2metres length featuring a durable and reliable M8 straight male connector on both ends, allowing you to easily connect to our Series 2 PoE devices.
Tamiya Plug with 10cm Leads, Male