MCC USB-1608FS-Plus (6069-410-015)
ID: 1178653
zł2,437.21
Tax included
zł1,981.47 tax excl.
DAQ device based on USB communication and equipped with 8 SE analog inputs, 8 digital inputs / outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 100 kS / s per channel. Digilent 6069-410-015
Description
The Measurement Computing USB-1808X is a USB-based DAQ device with eight simultaneous analog inputs (A/D per channel), 16-bit resolution, 100 kS/s/ch sample rate (400 kS/s aggregate), one 32-bit counter, and eight digital I/O. It offers software-selectable analog input ranges for ±10 V, ±5 V, ±2 V, and ±1 V. Each analog input channel has a dedicated 16-bit A/D converter for true simultaneous sampling of all 8 inputs. This device is USB-powered and requires no external power.
With hardware paced mode, the maximum throughput rate is 100 kS/s for any one channel, up to about 400 kS/s aggregate for multiple channels. Use burst scan mode to run any number of channels at the maximum rate of 100kS/s up to the full capacity of the 32K sample FIFO. The maximum sampling rate is 800 kS/s aggregate for all channels.
Each of the eight digital I/O channels is individually-configurable for input or output. When configured for input, the digital I/O terminals can detect the state of any TTL-level input. The digital I/O channels are high-drive (24 mA) connections.
A 32-bit event counter can accept a signal up to 1 MHz. The internal counter increments when the TTL levels transition from low to high.
The USB-1608FS-Plus has a bidirectional external clock terminal. When configured for input, A/D conversions can be paced by an external source. The USB-1608FS-Plus supports TTL-level input signals up to 100 kHz. When configured for output, this device can pace A/D conversions on a second device and acquire data from all input channels simultaneously.
The USB-1608FS-Plus provides an external digital trigger input and a trigger mode that is edge or level sensitive. Edge sensitive is software-selectable for rising or falling edge. Level sensitive is software-selectable for high or low level.
Software support includes DAQami, an optional out-of-the-box application for data logging, visualization, and signal generation. Data can be viewed in real-time or post-acquisition on user-configurable displays. Drivers are included for the most popular applications and programming languages including Visual C++®, Visual C#®, Visual Basic®.NET, DASYLab®, LabVIEW™, MATLAB®, and Python™.
Features
- 8 SE simultaneous analog inputs
- 16-bit resolution
- 100 kS/s/ch sample rate (400 kS/s aggregate)
- ±10 V, ±5 V, ±2 V, ±1 V input ranges
- Eight digital I/O
- One counter input
- No external power required. USB cable is included
Kit contains
- MCC USB-1608FS-Plus
- USB Cable
1178653
You might also like
HAT module with MCC 118 chip, designed for Raspberry Pi. Provides 8 analog inputs with a resolution of 12 bits, sampling rates up to 100 kS/s and range +/-10 V. Digilent 6069-410-000
zł478.37
24h
Available quantity: 2
Available
USB-based DAQ device with 16 single-ended or 8 differential analog inputs, 8 digital I/O, and two counter inputs and one output. It offers 16-bit resolution and a sampling rate of 500 kS/s. Digilent 6069-410-010
zł3,499.01
Delivery date unknown
No product available!
DAQ device based on USB communication and equipped with 8 analog SE / DIFF inputs, two analog outputs, 4 digital I/O, two counters and two inputs for encoder support. It offers 18-bit resolution and a sampling rate of 200 kS/s. Digilent 6069-410-014
zł5,253.66
Delivery date unknown
No product available!
Other products in the same category (16)
Non-contact tachometer for rotational speed measurement. Equipped with a 5-digit display and a USB interface. UNI-T UT372
zł295.20
2 weeks
No product available!
MCC USB-QUAD08 is a module for precise pulse counting and data reading from 8 quadrature encoders, with support for digital I/O and USB. Digilent 6069-410-045
zł3,355.93
3 weeks
No product available!
MCC USB-SSR24 is a control module for 24 SSR relays with optical isolation, USB communication, and support for popular programming languages. Digilent 6069-410-200
zł2,968.61
3 weeks
No product available!
MCC USB-3102 – USB module with 4 voltage/current outputs, 8 digital I/O lines, and a 32-bit counter input. Digilent 6069-410-030
zł2,235.16
3 weeks
No product available!
A portable combustible gas detector designed to detect methane, propane, and isobutane. The device features a 2.0" color TFT screen, three alarm modes (audible, visual, and vibrating), and a flexible 36 cm probe for easy access to hard-to-reach areas. A response time of less than 5 seconds and the ability to record up to 30 alarm events ensure fast and precise threat detection. Fnirsi GD-02
zł135.90
6 weeks
No product available!
The RF signal meter is a versatile tool for measuring and analysing frequencies from 50 MHz to 2.4 GHz. It has an LCD display, extendable antenna and is powered by a 9V battery. GOOIT GY560
zł72.63
24h
Available quantity: 9
Available
DAQ device based on USB communication and equipped with 8 analog outputs, 8 digital inputs/outputs and one 32-bit counter. Offers 16-bit resolution. Digilent 6069-410-054
zł2,955.01
3 weeks
No product available!
Tester dedicated to testing parameters in lead-acid batteries. It can check the working status of the battery by testing the starting process, charging process and electric load process, and then quickly and accurately analyze the battery\'s life status. Hantek HT2018B
zł125.00
24h
Available quantity: 1
Available
DAQ device based on USB communication and equipped with 8 analog SE/4 DIFF inputs, two analog outputs, 8 digital inputs/outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 50 kS/s. Digilent 6069-410-012
zł1,435.14
3 weeks
No product available!
MCC USB-2416-4AO – DAQ module with 32 analog inputs, 4 outputs, thermocouple support, and 24-bit resolution. Digilent 6069-410-023
zł7,299.80
3 weeks
No product available!
Li-Fe battery monitor that can measure voltage, current, power during charging and discharging, and watt-hours consumed and run time. The user can use a mobile application and a computer to control the measuring module. Juntek KG110F
zł339.11
24h
Available quantity: 2
Available
DC analyzer with a voltage measuring range from 4 to 60 V and current up to 100 A. It allows you to measure power, capacity and energy in the circuit
zł63.04
24h
Available quantity: 5
Available
The 0-25 mm digital micrometer is a reliable tool for professionals that provides precise measurements with easy reading of the results. It is ideal for accurately measuring a variety of objects in workshop or laboratory conditions. YT-72305
zł203.42
24h
Available quantity: 1
Available
A detector that can detect hidden objects behind walls, such as metals, live electrical cables and wood. Equipped with a display with indicators and an audible alarm. Fnirsi WD-01
zł141.88
24h
Available quantity: 3
Available
A universal calibrator that allows both simulation and measurement of various electrical and thermal parameters. It is able to emulate thermocouple signals and enables accurate measurement of direct voltage (DC), resistance and current, as well as testing and calibration of thermocouples and Pt100 and Cu50 thermoresistance sensors. LB02
zł598.48
24h
Available quantity: 2
Available
DAQ device based on USB communication and equipped with 8 analog SE/4 DIFF inputs, two analog outputs, 8 digital inputs/outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 100 kS/s. Digilent 6069-410-013
zł2,198.99
3 weeks
No product available!
DAQ device based on USB communication and equipped with 8 SE analog inputs, 8 digital inputs / outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 100 kS / s per channel. Digilent 6069-410-015