MCC 118 Voltage Measurement DAQ HAT - 8-channel module with analog inputs for Raspberry Pi

Description

HAT module MCC 118 system designed for Raspberry Pi minicomputers. It provides 8 single-ended (SE) analog inputs with a resolution of 12 bits, sampling rates up to 100 kS/s and a range of +/-10 V. The module uses a bi-directional clock pin that allows the use of an external or internal clock signal. The external digital trigger input is software configurable and can respond to a rising or falling edge, or high or low state. The MCC 118 system is supplied with the voltage of 3.3 V provided by the GPIO connector. Up to eight modules can be placed on one Raspberry Pi, which provides up to 64 analog channels.

The HAT configuration parameters are stored in the built-in EEPROM which allows the Raspberry Pi to automatically configure the GPIO pins when the HAT is connected. The open source MCC DAQ HAT library available in C/C++ and Python allows users to build Raspberry Pi applications using Linux.

Features

• 8 SE 12-bit voltage inputs
• 100 kS/s max sample rate (320 kS/s aggregate for stacked boards)
• +/-10 V input range
• Onboard sample buffers allow high-speed acquisition
• External scan clock I/O
• External digital trigger input
• Screw terminal connections

Kit contains

• MCC 118 DAQ HAT module
• 2x20 connector
• 3 x jumper
• 4 x distance
• 4 x screw
• 4 x nut
• Instruction