BGM220 Explorer Kit - development board with Bluetooth BGM220P module
ID: 582640
5906623419531
zł132.48
Tax included
zł107.71 tax excl.
Development board with Bluetooth 5.2 BGM220P module from Silicon Labs. It is equipped with a mikroBUS socket and a Qwiic connector and a 20-pin connector with peripherals such as I2C, SPI, UART and GPIO. SparkFun DEV-17588
Description
Development board with Bluetooth 5.2 BGM220P module from Silicon Labs. It is equipped with a mikroBUS socket and a Qwiic connector allowing users to add modules to the set. There is also a 20-pin connector with peripheral devices such as I2C, SPI, UART and GPIO. BGM220 Explorer is programmed via the microUSB connector using the built-in J-Link debugger, while the virtual USB COM port provides a serial connection with the target application, and the packet tracking interface (PTI) offers numerous information about sent and received packets as part of wireless communication. The kit is programmed in the Simplicity Studio environment, and the Board Support Package (BSP) library package provides an easy start for novice users. Full documentation with the guide is available on the product page.
Features
- BGM220PC22HNA module:
- Bluetooth 5.2
- 76.8 MHz, ARM Cortex-M33 with 512 KB of flash and 32 KB of RAM
- Bluetooth 5.2 with direction finding support and 38.4MHz HFXO PHY crystal with LE encoding
- Crystal 32.768 kHz LFXO
- 2.4 GHz band and chip antenna
- J-Link debugger with SWD interface:
- Tracking packets via UART protocol
- Virtual COM with hardware flow control
- MicroUSB connector for power and programming
- User button and LED
- Debug connector with access to: AEM, PTI, VCOM, SWD
- MicroBus connector
- Qwiic connector
582640
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
zł3.21
24h
Available quantity: 22
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.00
24h
Available quantity: 24
Available
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł12.19
Delivery date unknown
No product available!
Other products in the same category (16)
Evaluation platform with a DLP projector for a wide range of industrial applications such as 3D scanning, 3D printing and Automated Optical Inspection (AOI). Green light illumination. EKB DPM-E4750LCG-OX
zł13,762.05
6 weeks
No product available!
Evaluation platform with a DLP projector for a wide range of industrial applications such as 3D scanning, 3D printing and Automated Optical Inspection (AOI). EKB DPM-E4750RGBLC
zł9,527.15
6 weeks
No product available!
The Beetle shield is designed to attach a Beetle controller for easy connecting servos and sensors. DFR0285
zł12.73
24h
Available quantity: 2
Available
Module for learning the basics of electronic engineering; illustrates the relationship between voltage, current, and allows the generation and observation of signals. It has the ability to sample the signal up to 200kSPS in a 16-bit converter. Powered from the USB port. ADALM1000
zł559.00
1 weeks
No product available!
Love to Code Chibi Scope Display Accessory
zł270.55
24h
Available quantity: 2
Available
Arducam Nano RPI Module is a minicomputer equipped with Broadcom BCM2835 processor and VideoCore IV GPU. The module has two CSI connectors for connecting cameras, video output (PAL), SPI, I2C, UART, and GPIO. ArduCam B0101
zł658.46
4 weeks
No product available!
Evaluation kit with LittleBee GW1NR9 FPGA. It offers 8640 LUTs, 6480 Flip-Flops (FF), and has a built-in 8MB (64Mb) SDRAM. The board has 8 MB Flash, FTDI for UART, 8 LEDs and a button. TEC0117-01
zł311.95
4 weeks
No product available!
The EBB SB2209 CAN V1.0 (RP2040) is a compact extruder board featuring an RP2040 microcontroller and TMC2209 stepper driver, ensuring quiet and reliable motor operation via the CAN bus. Equipped with MAX31865 and ADXL345 sensors, support for BLTouch/Voron Tap, PH2.0 connectors, and fan ports with selectable voltage, it is an ideal solution for modern 3D printer toolheads.
zł136.52
24h
Available quantity: 10
Available
Starter kit for IoT projects with micro:bit modules. It contains a micro: bit plate and 7 modules with sensors, executive elements useful in projects related to the Internet of Things. DFRobot KIT0138
zł367.36
24h
Available quantity: 1
Available
Available
MaaXBoard AES-MC-SBC-IMX8M-G - minicomputer with NXP i.MX Quad Arm Cortex-A53 + Cortex-M4F processor
Single board computer with NXP i.MX 8M processor with 2 GB of DDR4 memory, Gigabit Ethernet port, two USB 3.0 ports, HDMI output, MIPI-DSI, MIPI-CSI, WiFi, Bluetooth Low Energy and MicroSD card slot. MaaXBoard AES-MC-SBC-IMX8M-G
zł579.00
1 weeks
No product available!
Espruino module with Bluetooth LE based on MDBT42Q system with Nordic Semiconductor nRF52832 microcontroller. The module has a pre-installed JavaScript interpreter. Adafruit 3876
zł195.31
24h
Available quantity: 1
Available
Available
ESP32-DEVKITS-R is an advanced development board based on the ESP32 chip, integrating Wi-Fi and Bluetooth functions. Ideal for IoT applications, it offers support for various interfaces and GPIO outputs, making it easy to connect peripherals.
zł57.56
24h
Available quantity: 1
Available
Starter kit with Intel Quark D2000 microcontroller. It offers a 32-bit microcontroller, 6-axis IMU sensor, temperature sensor, USB-UART converter and CR2032 battery socket. The set has connectors compatible with Arduino. Intel Quark Microcontroller Dev Kit D2000
zł49.90
24h
Available quantity: 42
Available
Love to Code Chibi Clip Mounting Accessory
zł79.03
24h
Available quantity: 1
Available
Development board with Bluetooth 5.2 BGM220P module from Silicon Labs. It is equipped with a mikroBUS socket and a Qwiic connector and a 20-pin connector with peripherals such as I2C, SPI, UART and GPIO. SparkFun DEV-17588