Hantek 6074BD - 4-channel 70MHz digital oscilloscope with 25MHz signal generator

Description

A 4-channel digital oscilloscope that connects to a computer via a USB interface. It features a bandwidth of 70 MHz and a sampling rate of 1 GSa/s. It has no built-in display and requires a computer with dedicated software to work properly. It has more than 20 built-in measurement functions and PASS/FAIL control. It allows signal analysis to be performed using the FFT. In addition, the oscilloscope offers a single-channel signal generator with waveform frequencies up to 25 MHz, which has the ability to generate sine wave, rectangular signal, triangular signal and noise. The unit requires no additional power supply - both communication and power are provided via a USB interface. Two oscilloscope probes and a set of test leads are included. The oscilloscope can work with Windows 7, 8, 10 operating systems and LabVIEW, VB and VC software. It is a useful measurement tool widely used in various fields such as communications, aerospace, embedded systems, computers, research and education.

Features

• Oscilloscope:
  • Number of channels: 4
  • Bandwidth: 70 MHz
  • Sample rate: 1 GS/s
  • Memory depth: 64 K
  • Time base range: 2ns to 1000 s
  • Time base accuracy: ±50 ppm
  • Input impedance: 1MΩ 25pF
  • Input sensitivity: 2 mV to 10 V
  • Vertical resolution: 8 bits
  • DC accuracy: ± 3%
  • Trigger source CH1, CH2, CH3, CH4
  • Trigger type: rising edge, falling edge
  • Signal processing: +,-,x,÷,FFT, inversion
  • Measurement: Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
• Signal Generator:
  • Frequency: 25 MHz
  • Digital to analogue converter: adjustable 2kHz to 200MHz
  • Frequency resolution: 0.10%
  • Channel: 1
  • Waveform depth: 2KSa
  • Vertical resolution: 12 bits
  • Frequency stability: <30ppm
  • Waveform amplitude: ±3.5V max.
  • Output impedance: 50 Ω
  • Output current: 50mA, Ipeak=50mA
  • BW system: 25M
  • Harmonic distortion: -50dBc(1KHz), -40dBc(10KHz)
• USB 2.0 communication
• USBXI connector
• Compatible with LabVIEW
• Supported systems: Windows 7, 8, 10
• Power supply: USB
• Dimensions: 175 x 105 x 25 mm
• Weight: 900 g

Kit contains

• Hantek 6074BD
• 2 x oscilloscope probe
• 2 x crocodile cable
• BNC-BNC cable
• Operating instructions
• USB cable