- New
TPS2116 Power Multiplexer USB-C (non-USB priority) - Pololu 3729
ID: 1203002
zł18.20
Tax included
zł14.80 tax excl.
Module based on the TPS2116 enabling automatic switching between two 1.6 - 5.5 V power sources with output through a USB Type-C connector, without USB priority, supporting up to 2.5 A continuous current and reverse current blocking. By default, it selects the higher input voltage with the option to switch between VIN1 and VIN2 by control signal. Pololu 3729
Description
The Pololu 3729 module enables automatic switching between two power sources in the 1.6 - 5.5 V range using the TPS2116 from Texas Instruments. The device provides seamless switchover without interruption of the output supply and blocks reverse current into both inputs, protecting connected power sources. The board can be used in embedded systems, portable devices, IoT projects, and applications requiring redundant power supply paths.
By default, the multiplexer selects the higher of the two input voltages. Configuration allows forced switching from VIN1 to VIN2 using a control signal or automatically when VIN1 falls below a preset threshold. The board also breaks out a USB Type-C connector that can supply the non-preferred VIN2 rail. Integrated low Rds(on) MOSFETs allow operation with up to 2.5 A of continuous current while maintaining high efficiency.
Power connections without USB Power connections with USB
Features
- Integrated circuit: TPS2116
- Input voltage: 1.6 - 5.5 V
- Maximum continuous current: 2.5 A
- Automatic selection of the higher input voltage
- Control signal switching between VIN1 and VIN2
- Configurable switchover threshold
- Reverse current blocking to both sources
- Integrated low Rds(on) MOSFETs
- Connector: USB Type-C
- Dimensions: 20.3 x 15.2 x 3 mm
Kit includes
- Pololu 3729 module
- Unassembled goldpin header strips
1203002
- Dimension diagram of the TPS2116 Power Multiplexer Carrier with USB Type-C Connector (274,86 kB)
- 3D model of the TPS2116 Power Multiplexer Carrier with USB Type-C Connector (4,97 MB)
- Drill guide for the TPS2116 Power Multiplexer Carrier with USB Type-C Connector (19,85 kB)
- Schematic - jpg (113,34 kB)
- Datasheet TPS2116 (2,79 MB)
- Power mux design calculator
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
No product available!
No product available!
Available
The MyoWare Power Shield is designed to take two standard CR2032 coin cell batteries to power the MyoWare Muscle Sensor. We have made this board in a way that the coin cell batteries are connected in parallel for extended capacity at a nominal 3.0V. DEV-13684
zł37.71
3 weeks
No product available!
Power supply module with an input voltage from 6 to 12 V and a configurable output voltage of 3.3 V or 5 V. It has holes with a 2.54 mm pitch. Perfect for use with a breadboard. SparkFun PRT-13032
Regular pricezł92.56zł19.90
24h
Available quantity: 2
Available
Power supply module with an input voltage from 4 to 9 V and a configurable output voltage of 3.3 V or 1.8 V. It has holes with a 2.54 mm pitch. Perfect for use with a contact plate. SparkFun PRT-13157
Regular pricezł103.17zł81.65
24h
Available quantity: 2
Available
Power multiplexer based on Texas Instruments TPS2113A. It enables smooth switching between two power sources from 2.8 V to 5.5 V. Pololu 2596
zł36.15
24h
Available quantity: 5
Available
Uninterruptible power supply (UPS) module allowing continued operation and safe shutdown after a power failure. It provides an output voltage of 5 V and allows the reading of battery operating parameters via the I2C bus. Waveshare UPS Module Mini
zł78.03
24h
Available quantity: 2
Available
The module enables the distribution of the supplied power between the connectors located on the board. It has a built-in power switch to control the system. The maximum voltage on each connector is 24 V.
zł26.32
4 weeks
No product available!
The module provides convenient and safe power supply for projects on breadboards with different voltage levels. It is useful when designing and testing electronic devices, microprocessor systems and prototype systems requiring stable and precise power supply
zł3.10
4 weeks
No product available!
A power supply module with an input voltage of 6 to 12 V and a configurable output voltage of 5 V or 3.3 V. It has holes with a 2.54 mm louver. Ideal for use with a contact board. SparkFun PRT-21297
zł74.38
24h
Available quantity: 3
Available
The breadboard power supply module provides convenient power for prototypes, offering 5V and 3.3V outputs. Powered by miniUSB or a 5.5x2.1mm DC connector, it provides flexibility and versatility in various electronics projects
zł8.91
24h
Available quantity: 40
Available
KAmod ProtoSupply is a universal, USB-C powered breadboard power supply module that offers two independent voltage outputs – the first adjustable (from 2.5 to 10.5 V or fixed at 3.3 V, 5 V, 9 V) and the second with 5 V or 12.5 V options – equipped with overload, overheat and short circuit protections and adapted to standard power rail layouts
zł25.90
24h
Available quantity: 185
Available
A compact breadboard power supply module offering stable 3.3V and 5V outputs and real-time voltage, current and power monitoring via the built-in LCD display. Compatible with Seeed Studio XIAO boards and featuring plug-and-play functionality, the device is ideal for efficient prototyping with full control over power parameters. Seeed Studio 114993507
zł121.52
24h
Available quantity: 2
Available
Module based on the TPS2116 enabling automatic switching between two 1.6 - 5.5 V power sources with output through a USB Type-C connector, with USB priority, supporting up to 2.5 A continuous current and reverse current blocking. In priority mode, it prefers USB power with the option to switch between VIN1 and VIN2 by control signal. Pololu 3728
zł18.20
6 weeks
No product available!
Module based on the TPS2116 enabling automatic switching between two 1.6 - 5.5 V power sources with output through a USB Type-C connector, without USB priority, supporting up to 2.5 A continuous current and reverse current blocking. By default, it selects the higher input voltage with the option to switch between VIN1 and VIN2 by control signal. Pololu 3729
zł18.20
6 weeks
No product available!
Module based on the TPS2116 enabling automatic switching between two 1.6 - 5.5 V power sources with output through a USB Type-C connector, without USB priority, supporting up to 2.5 A continuous current and reverse current blocking. By default, it selects the higher input voltage with the option to switch between VIN1 and VIN2 by control signal. Pololu 3729