STMPS2141STR - 2.7-5.5 V power switch 500/1000 mA
ID: 559527
zł3.28
Tax included
zł2.67 tax excl.
The STMPS2141STR system is a power switch designed for circuits with high capacitive loads and short circuits. The system is equipped with an N-channel MOSFET 90 mΩ controlled by the input logic level.
Description
The STMPS2141STR power supply switch is designed for circuits with high capacitive loads and short circuits. If the output current exceeds the limit, the system will switch to the constant current mode, while if the circuit starts charging too high current or there is a short-circuit, thermal protection will activate, which will switch the system off to prevent damage. After the system has cooled down to its normal temperature, the system will be switched on automatically. The switch can conduct a maximum current of 500 mA in continuous mode or 1000 mA of instantaneous current. The system operates on voltages from 2.7 V to 5.5 V. When in sleep mode, it draws a maximum of 12 μA.
Specification
- Maximum current: 500/1000 mA
- Power supply: 2.7 - 5.5 V
- Maximum power consumption in idle mode: 12 μA
- Housing: SOT23
- Protection against low voltage
- Protection against overheating and entering with a feedback signal
- ESD 8 kV protection
- Backfeed protection
- Working temperature: -40~85 ° C
559527
You might also like
Integrated Load Switch, SSOT6, Fairchild Semiconductor, RoHS
zł3.27
Delivery date unknown
No product available!
Controlled by logical levels power switch with adjustable current limit and protection against too low / too high voltage, excessive current or overheating. Power supply from 3 V - 5.5 V, housing WLCSP-9. NX5P2190UKZ
zł9.82
24h
Available quantity: 6
Available
Other products in the same category (11)
Enhanced single channel power switches, MSOP8, STM, RoHS
zł2.23
24h
Available quantity: 459
Available
No product available!
Analog Switch ICs 5-V, 2:1 (SPDT), 2-channel analog switch with powered-off protection 10-VSSOP -40 to 125°C, , VSSOP-10
zł10.16
24h
Available quantity: 104
Available
Controlled by logical levels power switch with adjustable current limit and protection against too low / too high voltage, excessive current or overheating. Power supply from 3 V - 5.5 V, housing WLCSP-9. NX5P2190UKZ
zł9.82
24h
Available quantity: 6
Available
No product available!
No product available!
TPS2024D is an integrated circuit from Texas Instruments, functioning as a power-distribution switch with a single output channel. It is designed to operate as a high-side switch with a built-in N-Channel MOSFET, allowing control of loads up to 2 A.
zł14.29
24h
Available quantity: 8
Available
Analog switch in double DPDT configuration, operating at 1.65 - 4.45 V, with very low resistance of just 2 Ω.
zł2.20
24h
Available quantity: 977
Available
The LT4276 is a pin-for-pin compatible family of IEEE 802.3 and LTPoE++ Powered Device (PD) controllers. It includes an isolated switching regulator controller capable of synchronous operation in both forward and flyback topologies with auxiliary power support.
zł42.31
24h
Available quantity: 50
Available
Enhanced dual channel power switches are intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. Use for power distribution systems that require multiple power switches in a single package. STMicroelectronics STMPS2252TTR
zł5.12
24h
Available quantity: 3127
Available
Current limited Power distribution switches, SO8, RoHS
zł6.53
24h
Available quantity: 67
Available
The STMPS2141STR system is a power switch designed for circuits with high capacitive loads and short circuits. The system is equipped with an N-channel MOSFET 90 mΩ controlled by the input logic level.