Qwiic Haptic Driver - LRA vibration motor module (assembled)

A GNSS module that combines the precise u-blox ZED-F9P receiver with the NEO-D9S L-band GNSS correction data receiver. Provides high-accuracy positioning without the need for separate RTK or NTRIP corrections. SparkFun GPS-22560

GPS module with GNSS receiver ZED-F9P. It can receive data from GPS, GLONASS, Galileo and BeiDou systems. It has USB, UART, I2C and SPI interfaces. RTK and high accuracy up to 10 mm. SparkFun GPS-15136

Module with ultrasonic distance sensor HC-SR04 with a range of up to 400 cm. It communicates via the I2C interface. SparkFun SEN-15171

TMAG5273 Hall sensor module dedicated to detecting the presence, strength and direction of a magnetic field in three dimensions. It uses communication via the I2C interface and Qwiic connectors. SparkFun SEN-23881

SEN-14347

Module with a digital rotary encoder controlled by the I2C interface. The potentiometer has RGB LED backlight. The encoder generates post-movement information with 24 levels per revolution and rotation direction detection. SparkFun DEV-15083

Module with a capacitive touch sensor based on the CAP1203 chip. There are three touch panels on the board that can be used as separate sensors (pins CS1, CS2, CS3) or as a touch slider. I2C communication. SparkFun SEN-15344

Qwiic adapter designed for micro:bit educational modules. Facilitates access to all pins that are led out on the connector with a pitch of 2.54 mm and the Qwiic connector. SparkFun BOB-16445

Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-20176

Module with 512 kbit (64kB) EEPROM. Communication is via the I2C interface. The module has 3 jumpers to select one of 8 addresses. SparkFun COM-18355

An adapter that allows you to quickly and easily connect Qwiic modules to Arduino boards using the ESLOV connector for I2C communication. SparkFun BOB-23589

End module of the communication system based on QwiicBus. It allows you to extend the range of the I2C bus. SparkFun COM-16988

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19218

Data logger based on the ATmega328 microcontroller. Data received via the I2C interface are saved on the microSD card. The module supports cards with a capacity of up to 32 GB. SparkFun DEV-15164

SparkFun Qwiic kit. Contains 10 wires of different lengths and tips. It allows you to connect Qwiic modules to a programming platform or to a prototype board. SparkFun KIT-15081

Module with the MCP9600 amplifier designed to work with a K-type thermocouple. The module has a screw connector for connecting this type of thermocouple. I2C communication. SparkFun SEN-16295